ARM: dts: renesas: Enable sysinfo on R-Car D3 Draak

Enable support for sysinfo on R-Car D3 Draak board. The sysinfo is used
e.g. to access and decode board-specific information and then in turn
used by board-info to print those information.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Drop compatible from I2C node, this is in r8a77995.dtsi already.
        Drop status = "okay" from EEPROM node.
	Add dts: tag.
	Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]

diff --git a/arch/arm/dts/r8a77995-draak-u-boot.dts b/arch/arm/dts/r8a77995-draak-u-boot.dts
index 0ea2570..260bc5d 100644 (file)
--- a/arch/arm/dts/r8a77995-draak-u-boot.dts
+++ b/arch/arm/dts/r8a77995-draak-u-boot.dts
@@ -8,6 +8,25 @@
 #include "r8a77995-draak.dts"
 #include "r8a77995-u-boot.dtsi"
 
+/ {
+       sysinfo {
+               compatible = "renesas,rcar-sysinfo";
+               i2c-eeprom = <&sysinfo_eeprom>;
+               u-boot,dm-pre-reloc;
+       };
+};
+
+&i2c0 {
+       u-boot,dm-pre-reloc;
+
+       sysinfo_eeprom: eeprom@50 {
+               compatible = "rohm,br24t01", "atmel,24c01";
+               reg = <0x50>;
+               pagesize = <8>;
+               u-boot,dm-pre-reloc;
+       };
+};
+
 &rpc {
        reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
        status = "disabled";

diff --git a/configs/r8a77995_draak_defconfig b/configs/r8a77995_draak_defconfig
index 4ddb66a..a09b33e 100644 (file)
--- a/configs/r8a77995_draak_defconfig
+++ b/configs/r8a77995_draak_defconfig
@@ -33,6 +33,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=2068
 CONFIG_CMD_BOOTZ=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -65,6 +66,9 @@ CONFIG_DFU_SF=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_RCAR_I2C=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
@@ -94,6 +98,7 @@ CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
+CONFIG_SYSINFO=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
 CONFIG_USB=y