--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Khadas System control Microcontroller Register map
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ *
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef MFD_KHADAS_MCU_H
+#define MFD_KHADAS_MCU_H
+
+#define KHADAS_MCU_PASSWD_VEN_0_REG 0x00 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_1_REG 0x01 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_2_REG 0x02 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_3_REG 0x03 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_4_REG 0x04 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_5_REG 0x05 /* RO */
+#define KHADAS_MCU_MAC_0_REG 0x06 /* RO */
+#define KHADAS_MCU_MAC_1_REG 0x07 /* RO */
+#define KHADAS_MCU_MAC_2_REG 0x08 /* RO */
+#define KHADAS_MCU_MAC_3_REG 0x09 /* RO */
+#define KHADAS_MCU_MAC_4_REG 0x0a /* RO */
+#define KHADAS_MCU_MAC_5_REG 0x0b /* RO */
+#define KHADAS_MCU_USID_0_REG 0x0c /* RO */
+#define KHADAS_MCU_USID_1_REG 0x0d /* RO */
+#define KHADAS_MCU_USID_2_REG 0x0e /* RO */
+#define KHADAS_MCU_USID_3_REG 0x0f /* RO */
+#define KHADAS_MCU_USID_4_REG 0x10 /* RO */
+#define KHADAS_MCU_USID_5_REG 0x11 /* RO */
+#define KHADAS_MCU_VERSION_0_REG 0x12 /* RO */
+#define KHADAS_MCU_VERSION_1_REG 0x13 /* RO */
+#define KHADAS_MCU_DEVICE_NO_0_REG 0x14 /* RO */
+#define KHADAS_MCU_DEVICE_NO_1_REG 0x15 /* RO */
+#define KHADAS_MCU_FACTORY_TEST_REG 0x16 /* R */
+#define KHADAS_MCU_BOOT_MODE_REG 0x20 /* RW */
+#define KHADAS_MCU_BOOT_EN_WOL_REG 0x21 /* RW */
+#define KHADAS_MCU_BOOT_EN_RTC_REG 0x22 /* RW */
+#define KHADAS_MCU_BOOT_EN_EXP_REG 0x23 /* RW */
+#define KHADAS_MCU_BOOT_EN_IR_REG 0x24 /* RW */
+#define KHADAS_MCU_BOOT_EN_DCIN_REG 0x25 /* RW */
+#define KHADAS_MCU_BOOT_EN_KEY_REG 0x26 /* RW */
+#define KHADAS_MCU_KEY_MODE_REG 0x27 /* RW */
+#define KHADAS_MCU_LED_MODE_ON_REG 0x28 /* RW */
+#define KHADAS_MCU_LED_MODE_OFF_REG 0x29 /* RW */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_REG 0x2c /* RW */
+#define KHADAS_MCU_MAC_SWITCH_REG 0x2d /* RW */
+#define KHADAS_MCU_MCU_SLEEP_MODE_REG 0x2e /* RW */
+#define KHADAS_MCU_IR_CODE1_0_REG 0x2f /* RW */
+#define KHADAS_MCU_IR_CODE1_1_REG 0x30 /* RW */
+#define KHADAS_MCU_IR_CODE1_2_REG 0x31 /* RW */
+#define KHADAS_MCU_IR_CODE1_3_REG 0x32 /* RW */
+#define KHADAS_MCU_USB_PCIE_SWITCH_REG 0x33 /* RW */
+#define KHADAS_MCU_IR_CODE2_0_REG 0x34 /* RW */
+#define KHADAS_MCU_IR_CODE2_1_REG 0x35 /* RW */
+#define KHADAS_MCU_IR_CODE2_2_REG 0x36 /* RW */
+#define KHADAS_MCU_IR_CODE2_3_REG 0x37 /* RW */
+#define KHADAS_MCU_PASSWD_USER_0_REG 0x40 /* RW */
+#define KHADAS_MCU_PASSWD_USER_1_REG 0x41 /* RW */
+#define KHADAS_MCU_PASSWD_USER_2_REG 0x42 /* RW */
+#define KHADAS_MCU_PASSWD_USER_3_REG 0x43 /* RW */
+#define KHADAS_MCU_PASSWD_USER_4_REG 0x44 /* RW */
+#define KHADAS_MCU_PASSWD_USER_5_REG 0x45 /* RW */
+#define KHADAS_MCU_USER_DATA_0_REG 0x46 /* RW 56 bytes */
+#define KHADAS_MCU_PWR_OFF_CMD_REG 0x80 /* WO */
+#define KHADAS_MCU_PASSWD_START_REG 0x81 /* WO */
+#define KHADAS_MCU_CHECK_VEN_PASSWD_REG 0x82 /* WO */
+#define KHADAS_MCU_CHECK_USER_PASSWD_REG 0x83 /* WO */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG 0x86 /* RO */
+#define KHADAS_MCU_WOL_INIT_START_REG 0x87 /* WO */
+#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG 0x88 /* WO */
+
+enum {
+ KHADAS_BOARD_VIM1 = 0x1,
+ KHADAS_BOARD_VIM2,
+ KHADAS_BOARD_VIM3,
+ KHADAS_BOARD_EDGE = 0x11,
+ KHADAS_BOARD_EDGE_V,
+};
+
+#endif /* MFD_KHADAS_MCU_H */
#include <net.h>
#include <asm/io.h>
#include <asm/arch/eth.h>
+#include <i2c.h>
+#include "khadas-mcu.h"
+
+/*
+ * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ */
+int meson_ft_board_setup(void *blob, struct bd_info *bd)
+{
+ struct udevice *bus, *dev;
+ int node, i2c_node, ret;
+ unsigned int i2c_addr;
+ u32 *val;
+
+ /* Find I2C device */
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "khadas,mcu");
+ if (node < 0) {
+ printf("vim3: cannot find khadas,mcu node\n");
+ return 0;
+ }
+
+ /* Get addr */
+ val = (u32 *)fdt_getprop(gd->fdt_blob, node, "reg", NULL);
+ if (!val) {
+ printf("vim3: cannot find khadas,mcu node i2c addr\n");
+ return 0;
+ }
+ i2c_addr = fdt32_to_cpu(*val);
+
+ /* Get i2c device */
+ i2c_node = fdt_parent_offset(gd->fdt_blob, node);
+ if (node < 0) {
+ printf("vim3: cannot find khadas,mcu i2c node\n");
+ return 0;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_I2C, i2c_node, &bus);
+ if (ret < 0) {
+ printf("vim3: cannot find i2c bus (%d)\n", ret);
+ return 0;
+ }
+
+ ret = i2c_get_chip(bus, i2c_addr, 1, &dev);
+ if (ret < 0) {
+ printf("vim3: cannot find i2c chip (%d)\n", ret);
+ return 0;
+ }
+
+ /* Read USB_PCIE_SWITCH_REG */
+ ret = dm_i2c_reg_read(dev, KHADAS_MCU_USB_PCIE_SWITCH_REG);
+ if (ret < 0) {
+ printf("vim3: failed to read i2c reg (%d)\n", ret);
+ return 0;
+ }
+ debug("MCU_USB_PCIE_SWITCH_REG: %d\n", ret);
+
+ /*
+ * If in PCIe mode, alter DT
+ * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE
+ */
+ if (ret > 0) {
+ static char data[32] __aligned(4);
+ const void *ptmp;
+ int len;
+
+ /* Find USB node */
+ node = fdt_node_offset_by_compatible(blob, -1, "amlogic,meson-g12a-usb-ctrl");
+ if (node < 0) {
+ printf("vim3: cannot find amlogic,meson-g12a-usb-ctrl node\n");
+ return 0;
+ }
+
+ /* Update PHY names (mandatory to disable USB3.0) */
+ len = strlcpy(data, "usb2-phy0", 32) + 1;
+ len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1;
+ ret = fdt_setprop(blob, node, "phy-names", data, len);
+ if (ret < 0) {
+ printf("vim3: failed to update usb phy names property (%d)\n", ret);
+ return 0;
+ }
+
+ /* Update PHY list, by keeping the 2 first entries (optional) */
+ ptmp = fdt_getprop(blob, node, "phys", &len);
+ if (ptmp) {
+ memcpy(data, ptmp, min_t(unsigned int, 2 * sizeof(u32), len));
+
+ ret = fdt_setprop(blob, node, "phys", data,
+ min_t(unsigned int, 2 * sizeof(u32), len));
+ if (ret < 0)
+ printf("vim3: failed to update usb phys property (%d)\n", ret);
+ } else
+ printf("vim3: cannot find usb node phys property\n");
+
+ /* Find PCIe node */
+ node = fdt_node_offset_by_compatible(blob, -1, "amlogic,g12a-pcie");
+ if (node < 0) {
+ printf("vim3: cannot find amlogic,g12a-pcie node\n");
+ return 0;
+ }
+
+ /* Enable PCIe */
+ len = strlcpy(data, "okay", 32);
+ ret = fdt_setprop(blob, node, "status", data, len);
+ if (ret < 0) {
+ printf("vim3: failed to enable pcie node (%d)\n", ret);
+ return 0;
+ }
+
+ printf("vim3: successfully enabled PCIe\n");
+ }
+
+ return 0;
+}
int misc_init_r(void)
{
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
Schematics are available on the manufacturer website.
+PCIe Setup
+----------
+The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
+lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+an USB3.0 Type A connector and a M.2 Key M slot.
+The PHY driving these differential lines is shared between
+the USB3.0 controller and the PCIe Controller, thus only
+a single controller can use it.
+
+To setup for PCIe, run the following commands from U-Boot:
+
+.. code-block:: none
+
+ i2c dev i2c@5000
+ i2c mw 0x18 0x33 1
+
+Then power-cycle the board.
+
+To set back to USB3.0, run the following commands from U-Boot:
+
+.. code-block:: none
+
+ i2c dev i2c@5000
+ i2c mw 0x18 0x33 0
+
+Then power-cycle the board.
+
U-Boot compilation
------------------
Schematics are available on the manufacturer website.
+PCIe Setup
+----------
+The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
+lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+an USB3.0 Type A connector and a M.2 Key M slot.
+The PHY driving these differential lines is shared between
+the USB3.0 controller and the PCIe Controller, thus only
+a single controller can use it.
+
+To setup for PCIe, run the following commands from U-Boot:
+
+.. code-block:: none
+
+ i2c dev i2c@5000
+ i2c mw 0x18 0x33 1
+
+Then power-cycle the board.
+
+To set back to USB3.0, run the following commands from U-Boot:
+
+.. code-block:: none
+
+ i2c dev i2c@5000
+ i2c mw 0x18 0x33 0
+
+Then power-cycle the board.
+
U-Boot compilation
------------------
projects / platform / kernel / u-boot.git / commitdiff