w1-gpio: add GPIO w1 bus master driver

Add a GPIO 1-wire bus master driver.  The driver used the GPIO API to
control the wire and the GPIO pin can be specified using platform data
similar to i2c-gpio.  The driver was tested with AT91SAM9260 + DS2401.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX
index 752613c..7b0ceaa 100644 (file)
--- a/Documentation/w1/masters/00-INDEX
+++ b/Documentation/w1/masters/00-INDEX
@@ -4,3 +4,5 @@ ds2482
        - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
 ds2490
        - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
+w1-gpio
+       - GPIO 1-wire bus master driver.

diff --git a/Documentation/w1/masters/w1-gpio b/Documentation/w1/masters/w1-gpio
new file mode 100644 (file)
index 0000000..af5d3b4
--- /dev/null
+++ b/Documentation/w1/masters/w1-gpio
@@ -0,0 +1,33 @@
+Kernel driver w1-gpio
+=====================
+
+Author: Ville Syrjala <syrjala@sci.fi>
+
+
+Description
+-----------
+
+GPIO 1-wire bus master driver. The driver uses the GPIO API to control the
+wire and the GPIO pin can be specified using platform data.
+
+
+Example (mach-at91)
+-------------------
+
+#include <linux/w1-gpio.h>
+
+static struct w1_gpio_platform_data foo_w1_gpio_pdata = {
+       .pin            = AT91_PIN_PB20,
+       .is_open_drain  = 1,
+};
+
+static struct platform_device foo_w1_device = {
+       .name                   = "w1-gpio",
+       .id                     = -1,
+       .dev.platform_data      = &foo_w1_gpio_pdata,
+};
+
+...
+       at91_set_GPIO_periph(foo_w1_gpio_pdata.pin, 1);
+       at91_set_multi_drive(foo_w1_gpio_pdata.pin, 1);
+       platform_device_register(&foo_w1_device);

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 8236d44..c449309 100644 (file)
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -42,5 +42,15 @@ config W1_MASTER_DS1WM
          in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
          hx4700.
 
+config W1_MASTER_GPIO
+       tristate "GPIO 1-wire busmaster"
+       depends on GENERIC_GPIO
+       help
+         Say Y here if you want to communicate with your 1-wire devices using
+         GPIO pins. This driver uses the GPIO API to control the wire.
+
+         This support is also available as a module.  If so, the module
+         will be called w1-gpio.ko.
+
 endmenu
 

diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 11551b3..1420b5b 100644 (file)
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_W1_MASTER_MATROX)          += matrox_w1.o
 obj-$(CONFIG_W1_MASTER_DS2490)         += ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)         += ds2482.o
 obj-$(CONFIG_W1_MASTER_DS1WM)          += ds1wm.o
+obj-$(CONFIG_W1_MASTER_GPIO)           += w1-gpio.o

diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
new file mode 100644 (file)
index 0000000..9e1138a
--- /dev/null
+++ b/drivers/w1/masters/w1-gpio.c
@@ -0,0 +1,124 @@
+/*
+ * w1-gpio - GPIO w1 bus master driver
+ *
+ * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/w1-gpio.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#include <asm/gpio.h>
+
+static void w1_gpio_write_bit_dir(void *data, u8 bit)
+{
+       struct w1_gpio_platform_data *pdata = data;
+
+       if (bit)
+               gpio_direction_input(pdata->pin);
+       else
+               gpio_direction_output(pdata->pin, 0);
+}
+
+static void w1_gpio_write_bit_val(void *data, u8 bit)
+{
+       struct w1_gpio_platform_data *pdata = data;
+
+       gpio_set_value(pdata->pin, bit);
+}
+
+static u8 w1_gpio_read_bit(void *data)
+{
+       struct w1_gpio_platform_data *pdata = data;
+
+       return gpio_get_value(pdata->pin);
+}
+
+static int __init w1_gpio_probe(struct platform_device *pdev)
+{
+       struct w1_bus_master *master;
+       struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+       int err;
+
+       if (!pdata)
+               return -ENXIO;
+
+       master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
+       if (!master)
+               return -ENOMEM;
+
+       err = gpio_request(pdata->pin, "w1");
+       if (err)
+               goto free_master;
+
+       master->data = pdata;
+       master->read_bit = w1_gpio_read_bit;
+
+       if (pdata->is_open_drain) {
+               gpio_direction_output(pdata->pin, 1);
+               master->write_bit = w1_gpio_write_bit_val;
+       } else {
+               gpio_direction_input(pdata->pin);
+               master->write_bit = w1_gpio_write_bit_dir;
+       }
+
+       err = w1_add_master_device(master);
+       if (err)
+               goto free_gpio;
+
+       platform_set_drvdata(pdev, master);
+
+       return 0;
+
+ free_gpio:
+       gpio_free(pdata->pin);
+ free_master:
+       kfree(master);
+
+       return err;
+}
+
+static int __exit w1_gpio_remove(struct platform_device *pdev)
+{
+       struct w1_bus_master *master = platform_get_drvdata(pdev);
+       struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+       w1_remove_master_device(master);
+       gpio_free(pdata->pin);
+       kfree(master);
+
+       return 0;
+}
+
+static struct platform_driver w1_gpio_driver = {
+       .driver = {
+               .name   = "w1-gpio",
+               .owner  = THIS_MODULE,
+       },
+       .remove = __exit_p(w1_gpio_remove),
+};
+
+static int __init w1_gpio_init(void)
+{
+       return platform_driver_probe(&w1_gpio_driver, w1_gpio_probe);
+}
+
+static void __exit w1_gpio_exit(void)
+{
+       platform_driver_unregister(&w1_gpio_driver);
+}
+
+module_init(w1_gpio_init);
+module_exit(w1_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO w1 bus master driver");
+MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
+MODULE_LICENSE("GPL");

diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
new file mode 100644 (file)
index 0000000..9797fec
--- /dev/null
+++ b/include/linux/w1-gpio.h
@@ -0,0 +1,23 @@
+/*
+ * w1-gpio interface to platform code
+ *
+ * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_W1_GPIO_H
+#define _LINUX_W1_GPIO_H
+
+/**
+ * struct w1_gpio_platform_data - Platform-dependent data for w1-gpio
+ * @pin: GPIO pin to use
+ * @is_open_drain: GPIO pin is configured as open drain
+ */
+struct w1_gpio_platform_data {
+       unsigned int pin;
+       unsigned int is_open_drain:1;
+};
+
+#endif /* _LINUX_W1_GPIO_H */