spin_lock_irq(&die_lock);
bust_spinlocks(1);
- printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
str, err, ++die_counter);
+
+ printk(KERN_EMERG);
+
#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
+ printk(KERN_CONT "PREEMPT ");
#endif
#ifdef CONFIG_FRAME_POINTER
- printk("FRAME_POINTER ");
+ printk(KERN_CONT "FRAME_POINTER ");
#endif
if (current_cpu_data.features & AVR32_FEATURE_OCD) {
unsigned long did = ocd_read(DID);
- printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+ printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
(did >> 1) & 0x7ff,
(did >> 12) & 0x7fff,
(did >> 28) & 0xf);
} else {
- printk("cpu: arch %u r%u / core %u r%u\n",
+ printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
current_cpu_data.arch_type,
current_cpu_data.arch_revision,
current_cpu_data.cpu_type,
bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
switch (bfin_memmap.map[i].type) {
case BFIN_MEMMAP_RAM:
- printk("(usable)\n");
- break;
+ printk(KERN_CONT "(usable)\n");
+ break;
case BFIN_MEMMAP_RESERVED:
- printk("(reserved)\n");
- break;
- default: printk("type %lu\n", bfin_memmap.map[i].type);
- break;
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+ break;
}
}
}
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
- KERN_INFO " fixedcode = 0x%p-0x%p\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
+ " fixedcode = 0x%p-0x%p\n"
+ " text = 0x%p-0x%p\n"
+ " rodata = 0x%p-0x%p\n"
+ " bss = 0x%p-0x%p\n"
+ " data = 0x%p-0x%p\n"
+ " stack = 0x%p-0x%p\n"
+ " init = 0x%p-0x%p\n"
+ " available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
+ " rootfs = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+ " DMA Zone = 0x%p-0x%p\n"
#endif
, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
_stext, _etext,
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1)
- printk("Active ");
+ printk(KERN_CONT "Active ");
else
- printk("Off ");
+ printk(KERN_CONT "Off ");
if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
+ printk(KERN_CONT "and Enabled\n");
else
- printk("and Disabled\n");
+ printk(KERN_CONT "and Disabled\n");
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
- printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = smp_processor_id();
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
verbose_printk(KERN_NOTICE "No trace since you do not have "
- "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
- KERN_NOTICE "\n");
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
else
#endif
dump_bfin_trace_buffer();
if (oops_in_progress) {
/* Dump the current kernel stack */
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+ verbose_printk(KERN_NOTICE "Kernel Stack\n");
show_stack(current, NULL);
print_modules();
#ifndef CONFIG_ACCESS_CHECK
ret_addr = 0;
if (!j && i % 8 == 0)
- printk("\n" KERN_NOTICE "%p:",addr);
+ printk(KERN_NOTICE "%p:",addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
- verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
+ verbose_printk(KERN_NOTICE
+ "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
else
verbose_printk(KERN_NOTICE "invalid mm\n");
} else
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
- "No Valid process in current context\n");
+ verbose_printk(KERN_NOTICE
+ "No Valid process in current context\n");
#endif
}
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
- verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+ verbose_printk(KERN_NOTICE "0x%p: ", addr);
if (!get_instruction(&val, addr)) {
val = 0;
oops_in_progress)){
verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
- verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
- KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
- " better idea where it came from\n");
+ verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
verbose_printk(KERN_NOTICE "%s", linux_banner);
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+ verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+ print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
- (long)fp->seqstat, fp->ipend, fp->syscfg);
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
unsigned char *tp;
int i;
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
- printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
- KERN_EMERG "\n",
+ printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n",
+ printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n",
(unsigned int) rdusp(), (unsigned int) fp);
- printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+ printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
}
/*
if (i % 5)
printk(KERN_CONT " [%08lx] ", addr);
else
- printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+ printk(KERN_EMERG " [%08lx] ", addr);
i++;
#endif
}
if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
- printk(" %08lx", *(stack + i));
+ printk(KERN_EMERG " ");
+ printk(KERN_CONT " %08lx", *(stack + i));
}
printk("\n");
i = 0;
unsigned long *stack, addr, module_start, module_end;
int i;
- printk(KERN_EMERG "\n"
- KERN_EMERG "Call Trace:");
+ printk(KERN_EMERG "\nCall Trace:");
stack = sp;
i = 0;
printk("\n");
#else
if ((i % 6) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("[<%08lx>] ", addr);
i++;
#endif
if (((long) stack & (THREAD_SIZE - 1)) == 0)
break;
if ((i % 8) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("%08lx ", *stack++);
}
show_stack(current, (unsigned long *) sp);
#if 0
- printk(KERN_EMERG "\n"
- KERN_EMERG "Code: ");
+ printk(KERN_EMERG "\nCode: ");
if (regs->pc < PAGE_OFFSET)
goto bad;
{
console_verbose();
spin_lock_irq(&die_lock);
- printk(KERN_EMERG "\n"
- KERN_EMERG "%s: %04x\n",
+ printk(KERN_EMERG "\n%s: %04x\n",
str, code & 0xffff);
show_registers(regs);
if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
(regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
printk(KERN_EMERG "Exception in usermode interrupt handler\n");
- printk(KERN_EMERG "\n"
- KERN_EMERG " Please connect to kernel debugger !!\n");
+ printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
asm volatile ("0: bra 0b");
}
{
console_verbose();
- printk(KERN_EMERG "\n"
- KERN_EMERG "Asynchronous I/O Bus Error\n"
- KERN_EMERG "==========================\n");
+ printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+ printk(KERN_EMERG "==========================\n");
if (bcberr & BCBERR_BEME)
printk(KERN_EMERG "- Multiple recorded errors\n");
* software. The user has to press the button himself. */
printk(KERN_EMERG "System shut down completed.\n"
- KERN_EMERG "Please power this system off now.");
+ "Please power this system off now.");
}
void (*pm_power_off)(void) = machine_power_off;
oops_enter();
/* Amuse the user in a SPARC fashion */
- if (err) printk(
-KERN_CRIT " _______________________________ \n"
-KERN_CRIT " < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT " ------------------------------- \n"
-KERN_CRIT " \\ ^__^\n"
-KERN_CRIT " \\ (xx)\\_______\n"
-KERN_CRIT " (__)\\ )\\/\\\n"
-KERN_CRIT " U ||----w |\n"
-KERN_CRIT " || ||\n");
+ if (err) printk(KERN_CRIT
+ " _______________________________ \n"
+ " < Your System ate a SPARC! Gah! >\n"
+ " ------------------------------- \n"
+ " \\ ^__^\n"
+ " (__)\\ )\\/\\\n"
+ " U ||----w |\n"
+ " || ||\n");
/* unlock the pdc lock if necessary */
pdc_emergency_unlock();
else
printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
code);
- printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+ printk(KERN_CONT "pid=%d command='%s'\n",
+ task_pid_nr(current), current->comm);
show_regs(regs);
#endif
si.si_signo = SIGSEGV;
if (kstack_end(stack))
break;
if (i && ((i % 8) == 0))
- printk("\n" KERN_INFO " ");
- printk("%08lx ", *stack++);
+ printk(KERN_INFO " ");
+ printk(KERN_CONT "%08lx ", *stack++);
}
show_trace(task, esp);
if (apic_verbosity == APIC_QUIET)
return;
- printk(KERN_DEBUG "\n");
printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
{
static const char ACPI_PSS_BIOS_BUG_MSG[] =
KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
- KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
struct init_on_cpu init_on_cpu;
int rc;
m->cs, m->ip);
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
printk(KERN_EMERG "TSC %llx ", m->tsc);
if (m->addr)
- printk("ADDR %llx ", m->addr);
+ printk(KERN_CONT "ADDR %llx ", m->addr);
if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
+ printk(KERN_CONT "MISC %llx ", m->misc);
+ printk(KERN_CONT "\n");
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
static void print_mce_head(void)
{
- printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+ printk(KERN_EMERG "\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
nommu:
/* Should not happen anymore */
printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_WARNING "falling back to iommu=soft.\n");
+ "falling back to iommu=soft.\n");
return -1;
}
}
static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
/*
* No vm86 mode in 64-bit mode:
for (i = 0; i < 16; i++) {
if ((i % 8) == 0)
- printk ("\n" KERN_INFO "a%02d: ", i);
- printk("%08lx ", regs->areg[i]);
+ printk(KERN_INFO "a%02d:", i);
+ printk(KERN_CONT " %08lx", regs->areg[i]);
}
- printk("\n");
+ printk(KERN_CONT "\n");
printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
regs->pc, regs->ps, regs->depc, regs->excvaddr);
{
int drive,drives,nomem;
- printk(KERN_INFO "FD: probing units\n" KERN_INFO "found ");
+ printk(KERN_INFO "FD: probing units\nfound ");
drives=0;
nomem=0;
for(drive=0;drive<FD_MAX_UNITS;drive++) {
static void ace_dump_regs(struct ace_device *ace)
{
- dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
- KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n"
- KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
+ dev_info(ace->dev,
+ " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
+ " status:%.8x mpu_lba:%.8x busmode:%4x\n"
+ " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
ace_in32(ace, ACE_CTRL),
ace_in(ace, ACE_SECCNTCMD),
ace_in(ace, ACE_VERSION),
(BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
== BIOS_CNTL_LOCK_ENABLE_MASK) {
static __initdata /*const*/ char warning[] =
- KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
- KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
- KERN_WARNING PFX "you are certain that your system has a functional\n"
- KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+ KERN_WARNING
+PFX "Firmware space is locked read-only. If you can't or\n"
+PFX "don't want to disable this in firmware setup, and if\n"
+PFX "you are certain that your system has a functional\n"
+PFX "RNG, try using the 'no_fwh_detect' option.\n";
if (no_fwh_detect)
return -ENODEV;
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status:0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status:0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
outsw(base, frame->data, word_count);
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status: 0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status: 0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
- printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n"
- KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n"
- KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
- KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+ printk(KERN_DEBUG
+ " cntl = 0x%02x, mdcntl = 0x%02x\n"
+ " sts = 0x%02x, extsts = 0x%02x\n"
+ " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
+ " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
in_8(&iic->xtcntlss), in_8(&iic->directcntl));
__u8 *uuid;
uuid = sb->set_uuid;
- printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
- ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
- KERN_INFO "md: Name: \"%s\" CT:%llu\n",
+ printk(KERN_INFO
+ "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
+ ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
+ "md: Name: \"%s\" CT:%llu\n",
le32_to_cpu(sb->major_version),
le32_to_cpu(sb->feature_map),
uuid[0], uuid[1], uuid[2], uuid[3],
& MD_SUPERBLOCK_1_TIME_SEC_MASK);
uuid = sb->device_uuid;
- printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
+ printk(KERN_INFO
+ "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
" RO:%llu\n"
- KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
- ":%02x%02x%02x%02x%02x%02x\n"
- KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
- KERN_INFO "md: (MaxDev:%u) \n",
+ "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
+ ":%02x%02x%02x%02x%02x%02x\n"
+ "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
+ "md: (MaxDev:%u) \n",
le32_to_cpu(sb->level),
(unsigned long long)le64_to_cpu(sb->size),
le32_to_cpu(sb->raid_disks),
skb->ip_summed = CHECKSUM_UNNECESSARY;
dev_dbg(xpnet, "passing skb to network layer\n"
- KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n",
(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
skb_end_pointer(skb), skb->len);
msg->buf_pa = xp_pa((void *)start_addr);
dev_dbg(xpnet, "sending XPC message to %d:%d\n"
- KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+ "msg->buf_pa=0x%lx, msg->size=%u, "
"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);
#ifdef DEBUG_DRIVER
/* dump the packet */
- {
- int i;
-
- for (i = 0; i < 64; i++) {
- if ((i % 16) == 0)
- printk("\n" KERN_DEBUG);
- printk ("%2.2x ", skb->data [i]);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE,
+ 16, 1, skb->data, 64, true);
#endif
entry = lp->tx_new & lp->tx_ring_mod_mask;
ib->btx_ring [entry].length = (-skblen) | 0xf000;
void arcnet_dump_skb(struct net_device *dev,
struct sk_buff *skb, char *desc)
{
- int i;
+ char hdr[32];
- printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc);
- for (i = 0; i < skb->len; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", ((u_char *) skb->data)[i]);
- }
- printk("\n");
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, skb->data, skb->len, true);
}
EXPORT_SYMBOL(arcnet_dump_skb);
int i, length;
unsigned long flags = 0;
static uint8_t buf[512];
+ char hdr[32];
/* hw.copy_from_card expects IRQ context so take the IRQ lock
to keep it single threaded */
/* if the offset[0] byte is nonzero, this is a 256-byte packet */
length = (buf[2] ? 256 : 512);
- printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc);
- for (i = 0; i < length; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", buf[i]);
- }
- printk("\n");
-
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, buf, length, true);
}
#else
printk(KERN_DEBUG "phy registers:");
for (addr = 0; addr < 32; ++addr) {
if ((addr & 7) == 0)
- printk("\n" KERN_DEBUG);
- printk(" %.4x", bmac_mif_read(dev, addr));
+ printk(KERN_DEBUG);
+ printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
}
- printk("\n");
+ print(KERN_CONT "\n");
+
if (bp->is_bmac_plus) {
unsigned int capable, ctrl;
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
mark = ((mark + 0x3) & ~0x3);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
+ printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ printk(KERN_ERR PFX);
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
data[8] = 0x0;
printk(KERN_CONT "%s", (char *)data);
}
- printk("\n" KERN_ERR PFX "end of fw dump\n");
+ printk(KERN_ERR PFX "end of fw dump\n");
}
static void bnx2x_panic_dump(struct bnx2x *bp)
#ifdef BNX2X_STOP_ON_ERROR
BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
" so reset not done to allow debug dump,\n"
- KERN_ERR " you will need to reboot when done\n");
+ " you will need to reboot when done\n");
return;
#endif
printk(KERN_INFO "tx_coalesce:\t%d packets\n",
tx_coalesce);
if (np->coalesce)
- printk(KERN_INFO "rx_coalesce:\t%d packets\n"
- KERN_INFO "rx_timeout: \t%d ns\n",
+ printk(KERN_INFO
+ "rx_coalesce:\t%d packets\n"
+ "rx_timeout: \t%d ns\n",
np->rx_coalesce, np->rx_timeout*640);
if (np->vlan)
printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
printk (KERN_INFO "Operating at 10 Mbps, ");
}
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
}
if (np->full_duplex) {
bmcr |= MII_BMCR_DUPLEX_MODE;
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
#if 0
/* Set 1000BaseT Master/Slave setting */
__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
printk (KERN_INFO "Operating at 1000 Mbps, ");
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
#ifndef MODULE
static int printed_version;
if (!printed_version++)
- printk (KERN_INFO "%s" KERN_INFO "%s",
- version, version2);
+ printk(KERN_INFO "%s%s", version, version2);
#endif
card_idx++;
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
- printk (KERN_INFO "%s" KERN_INFO "%s",
+ printk (KERN_INFO "%s%s",
version, version2);
#endif
unsigned long flags;
int i;
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
- " resetting...\n", dev->name, ioread32(ioaddr + ISR));
+ printk(KERN_WARNING
+ "%s: Transmit timed out, status %8.8x, resetting...\n",
+ dev->name, ioread32(ioaddr + ISR));
{
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring);
+ printk(PR_CONT " %8.8x",
+ (unsigned int) np->rx_ring[i].status);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", np->tx_ring[i].status);
- printk("\n");
+ printk(PR_CONT " %4.4x", np->tx_ring[i].status);
+ printk(PR_CONT "\n");
}
spin_lock_irqsave(&np->lock, flags);
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n"
-KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
-KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
+" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
+" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
/* IP_MF appears to be only defined in <netinet/ip.h>, however,
{
printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
- printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ le32_to_cpu(hmp->rx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
- printk("\n");
+ printk(KERN_CONT " %4.4x",
+ le32_to_cpu(hmp->tx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
}
/* Reinit the hardware and make sure the Rx and Tx processes
#ifdef __i386__
if (hamachi_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)hmp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %c #%d desc. %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)hmp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
u16 *addr = (u16 *)
hmp->rx_skbuff[i]->data;
int j;
-
+ printk(KERN_DEBUG "Addr: ");
for (j = 0; j < 0x50; j++)
printk(" %4.4x", addr[j]);
printk("\n");
static const char bc_drvname[] = "baycom_epp";
static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
static const char bc_drvname[] = "baycom_par";
static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
static const char bc_drvname[] = "baycom_ser_fdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
static const char bc_drvname[] = "baycom_ser_hdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
static const char version[] __devinitconst =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
- KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+ " originally by Donald Becker <becker@scyld.com>\n"
+ " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
}
if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+ printk(KERN_INFO "%s%s", version1, version2);
printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
static char version[] __devinitdata =
KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-KERN_INFO " Support available from http://foo.com/bar/baz.html\n";
+" Support available from http://foo.com/bar/baz.html\n";
/* define to 1 to enable PIO instead of MMIO */
#undef USE_IO_OPS
strcpy(info->node.dev_name, dev->name);
- printk(KERN_INFO "%s: port %#3lx, irq %d,",
- dev->name, dev->base_addr, dev->irq);
- printk (" mmio %#5lx,", (u_long)ti->mmio);
- printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
- printk ("\n" KERN_INFO " hwaddr=");
- for (i = 0; i < TR_ALEN; i++)
- printk("%02X", dev->dev_addr[i]);
- printk("\n");
+ printk(KERN_INFO
+ "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+ dev->name, dev->base_addr, dev->irq,
+ (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+ dev->dev_addr);
return 0;
cs_failed:
ladrf[byte] |= (1 << (hashcode & 7));
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- printk(KERN_DEBUG " adr =");
- for (i = 0; i < 6; i++)
- printk(" %02X", adr[i]);
- printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]"
- " =", hashcode);
- for (i = 0; i < 8; i++)
- printk(" %02X", ladrf[i]);
- printk("\n");
+ if (pc_debug > 2)
+ printk(KERN_DEBUG " adr =%pM\n", adr);
+ printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT " %02X", ladrf[i]);
+ printk(KERN_CONT "\n");
}
#endif
} /* BuildLAF */
&new_ring_dma_addr);
if (new_tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_tx_ring;
}
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
&new_ring_dma_addr);
if (new_rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_rx_ring;
}
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
/* Version 0x2623 and 0x2624 */
if (((chip_version + 1) & 0xfffe) == 0x2624) {
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
- printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i);
+ printk(KERN_INFO " tx_start_pt(0x%04x):", i);
switch (i >> 10) {
case 0:
- printk(" 20 bytes,");
+ printk(KERN_CONT " 20 bytes,");
break;
case 1:
- printk(" 64 bytes,");
+ printk(KERN_CONT " 64 bytes,");
break;
case 2:
- printk(" 128 bytes,");
+ printk(KERN_CONT " 128 bytes,");
break;
case 3:
- printk("~220 bytes,");
+ printk(KERN_CONT "~220 bytes,");
break;
}
i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */
- printk(" BCR18(%x):", i & 0xffff);
+ printk(KERN_CONT " BCR18(%x):", i & 0xffff);
if (i & (1 << 5))
- printk("BurstWrEn ");
+ printk(KERN_CONT "BurstWrEn ");
if (i & (1 << 6))
- printk("BurstRdEn ");
+ printk(KERN_CONT "BurstRdEn ");
if (i & (1 << 7))
- printk("DWordIO ");
+ printk(KERN_CONT "DWordIO ");
if (i & (1 << 11))
- printk("NoUFlow ");
+ printk(KERN_CONT "NoUFlow ");
i = a->read_bcr(ioaddr, 25);
- printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
+ printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 26);
- printk(" SRAM_BND=0x%04x,", i << 8);
+ printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 27);
if (i & (1 << 14))
- printk("LowLatRx");
+ printk(KERN_CONT "LowLatRx");
}
}
&lp->tx_ring_dma_addr);
if (lp->tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
&lp->rx_ring_dma_addr);
if (lp->rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
GFP_ATOMIC);
if (!lp->tx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
GFP_ATOMIC);
if (!lp->rx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
GFP_ATOMIC);
if (!lp->tx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
GFP_ATOMIC);
if (!lp->rx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
#ifdef __i386__
if (netif_msg_hw(np)) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)(np->tx_ring_dma));
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
np->tx_ring[i].frag[0].length);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)(np->rx_ring_dma));
for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
}
if (!is_valid_ether_addr(dev->dev_addr)) {
- printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
+ printk(KERN_ERR
+ "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
+ dev->name, word1, word2);
return -EINVAL;
}
__set_bit(hash, &data->mc_hash[0]);
} else {
printk(KERN_ERR
- "%s: got multicast address of length %d "
- "instead of 6.\n", dev->name,
+ "%s: got multicast address of length %d instead of 6.\n",
+ dev->name,
mc->dmi_addrlen);
}
macmode &= ~FullDuplex;
if (netif_msg_link(de)) {
- printk(KERN_INFO "%s: set link %s\n"
- KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
- KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+ printk(KERN_INFO
+ "%s: set link %s\n"
+ "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
+ "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
de->dev->name, media_name[media],
de->dev->name, dr32(MacMode), dr32(SIAStatus),
dr32(CSR13), dr32(CSR14), dr32(CSR15),
(unsigned int)tp->rx_ring[i].buffer2,
buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
- if (j < 100) printk(" %2.2x", buf[j]);
- printk(" j=%d.\n", j);
+ if (j < 100)
+ printk(KERN_CONT " %2.2x", buf[j]);
+ printk(KERN_CONT " j=%d.\n", j);
}
printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ (unsigned int)tp->rx_ring[i].status);
+ printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
#endif
static const char version[] __initconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/drivers.html\n";
+ " http://www.scyld.com/network/drivers.html\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
- printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring);
+ printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
printk(" %8.8x", np->tx_ring[i].status);
printk("\n");
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
i, np->tx_ring[i].length,
np->tx_ring[i].status, np->tx_ring[i].buffer1);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inw(get_dmac_tx(port) + CDAL, card),
sca_inw(get_dmac_tx(port) + EDAL, card),
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inl(get_dmac_tx(port) + CDAL, card),
sca_inl(get_dmac_tx(port) + EDAL, card),
}
if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
- printk( KERN_WARNING " WARNING: The PCI BIOS assigned "
- "this PCI card to IRQ %d, which is unlikely "
- "to work!.\n"
- KERN_WARNING " You should use the PCI BIOS "
- "setup to assign a valid IRQ line.\n",
+ printk( KERN_WARNING
+ " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+ " You should use the PCI BIOS setup to assign a valid IRQ line.\n",
pci_irq_line );
/* avoiding re-enable dual adapters */
#ifdef PCMCIA_DEBUG
if (pc_debug > 3) {
- int i;
- printk(KERN_DEBUG "skb->data before untranslate");
- for (i = 0; i < 64; i++)
- printk("%02x ", skb->data[i]);
- printk("\n" KERN_DEBUG
+ print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ skb->data, 64, true);
+ printk(KERN_DEBUG
"type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
psnap->org[0], psnap->org[1], psnap->org[2]);
cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */
#ifdef DEBUG_I82593_SHOW
- {
- u_char *c = (u_char *) &cfblk;
- int i;
- printk(KERN_DEBUG "wavelan_cs: config block:");
- for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
- {
- if((i % 16) == 0) printk("\n" KERN_DEBUG);
- printk("%02x ", *c);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+ 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
#endif
/* Copy the config block to the i82593 */
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+ " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
int i;
printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", yp->rx_ring[i].result_status);
- printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ yp->rx_ring[i].result_status);
+ printk(KERN_CONT "\n");
+ printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
- yp->tx_ring[i].result_status);
- printk("\n");
+ printk(KERN_CONT " %4.4x /%8.8x",
+ yp->tx_status[i].tx_errs,
+ yp->tx_ring[i].result_status);
+ printk(KERN_CONT "\n");
}
/* If the hardware is found to hang regularly, we will update the code
#if defined(__i386__)
if (yellowfin_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n",
+ printk(KERN_DEBUG" Tx ring at %8.8llx:\n",
(unsigned long long)yp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE*2; i++)
- printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+ printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n",
i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
- printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n",
+ printk(KERN_DEBUG " Rx ring %8.8llx:\n",
(unsigned long long)yp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(mem_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(io_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
case HPEE_PORT_INIT_WIDTH_BYTE:
s=1;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outb((inb(get_16(buf+len+1) &
get_8(buf+len+3)) |
get_8(buf+len+4)), get_16(buf+len+1));
case HPEE_PORT_INIT_WIDTH_DWORD:
s=4;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outl((inl(get_16(buf+len+1) &
get_32(buf+len+3)) |
get_32(buf+len+7)), get_16(buf+len+1));
break;
default:
- printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
+ printk(KERN_ERR "Invalid port init word %02x\n", c);
return 0;
}
/* just skip past the type field */
len = get_8(buf);
if (len > 80) {
- printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+ printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
}
return 1+len;
}
if (p0 + function_len < pos) {
- printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
+ printk(KERN_ERR "eisa_enumerator: function %d length mis-match "
"got %d, expected %d\n",
num_func, pos-p0, function_len);
res=-1;
init_timer(&poll_timer);
/* Build interrupt mask */
- printk(", %d sockets\n" KERN_INFO " irq list (", sockets);
+ printk(KERN_CONT ", %d sockets\n", sockets);
+ printk(KERN_INFO " irq list (");
if (irq_list_count == 0)
mask = irq_mask;
else
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
/* Maybe it is sufficient just to release the ST-DMA lock... (if
* possible at all) At least, we should check if the lock could be
int i;
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
for (i = 0; i < cmd->cmd_len; ++i)
- printk(" %.2x", cmd->cmnd[i]);
- printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
+ printk(KERN_CONT " %.2x", cmd->cmnd[i]);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
}
#endif
if (strcmp(current->comm, cmd) && printk_ratelimit()) {
printk(KERN_WARNING
"sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n" KERN_WARNING " "
+ "guessing data in;\n "
"program %s not setting count and/or reply_len properly\n",
old_hdr.reply_len - (int)SZ_SG_HEADER,
input_size, (unsigned int) cmnd[0],
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
return SCSI_ABORT_NOT_RUNNING;
}
static void moan_device(const char *str, struct pci_dev *dev)
{
- printk(KERN_WARNING "%s: %s\n"
- KERN_WARNING "Please send the output of lspci -vv, this\n"
- KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
- KERN_WARNING "manufacturer and name of serial board or\n"
- KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+ printk(KERN_WARNING
+ "%s: %s\n"
+ "Please send the output of lspci -vv, this\n"
+ "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ "manufacturer and name of serial board or\n"
+ "modem board to rmk+serial@arm.linux.org.uk.\n",
pci_name(dev), str, dev->vendor, dev->device,
dev->subsystem_vendor, dev->subsystem_device);
}
ssb_printk(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Failed to write to SPROM.\n");
failed = 1;
break;
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Could not disable SPROM write access.\n");
failed = 1;
}
struct urb *urb;
int length;
unsigned long flags;
- char buffer[4]; /* Any root hubs with > 31 ports? */
+ char buffer[6]; /* Any root hubs with > 31 ports? */
if (unlikely(!hcd->rh_registered))
return;
clcdfb_enable(fb, regs.cntl);
#ifdef DEBUG
- printk(KERN_INFO "CLCD: Registers set to\n"
- KERN_INFO " %08x %08x %08x %08x\n"
- KERN_INFO " %08x %08x %08x %08x\n",
+ printk(KERN_INFO
+ "CLCD: Registers set to\n"
+ " %08x %08x %08x %08x\n"
+ " %08x %08x %08x %08x\n",
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
dprintk(KERN_DEBUG "DAC1064regs ");
for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) {
dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DAC1064clk ");
+ dprintk(KERN_DEBUG "DAC1064clk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]);
dprintk("\n");
dprintk(KERN_DEBUG "3026DACregs ");
for (i = 0; i < 21; i++) {
dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DACclk ");
+ dprintk(KERN_DEBUG "DACclk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, hw->DACclk[i]);
dprintk("\n");
if the device name contains the string "DX" and tell the
user how to reconfigure the card. */
if (strstr(sti->outptr.dev_name, "DX")) {
- printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
- "support '%s' in double-buffer mode.\n"
- KERN_WARNING "WARNING: Please disable the double-buffer mode "
- "in IPL menu (the PARISC-BIOS).\n",
+ printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
sti->outptr.dev_name);
goto out_err0;
}
D2({
int i=0;
struct jffs2_raw_node_ref *this;
- printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG);
+ printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
this = ic->nodes;
+ printk(KERN_DEBUG);
while(this) {
- printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this));
+ printk(KERN_CONT "0x%08x(%d)->",
+ ref_offset(this), ref_flags(this));
if (++i == 5) {
- printk("\n" KERN_DEBUG);
+ printk(KERN_DEBUG);
i=0;
}
this = this->next_in_ino;
}
- printk("\n");
+ printk(KERN_CONT "\n");
});
switch (ic->class) {
return ret;
}
if (ret > 0) {
- printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
- "it should follow 0/-E convention\n"
- KERN_WARNING "%s: loading module anyway...\n",
+ printk(KERN_WARNING
+"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n"
+"%s: loading module anyway...\n",
__func__, mod->name, ret,
__func__);
dump_stack();
int err;
int capture=1;
- /* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */
+ /* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */
emu->p16v_device_offset = device;
if (rpcm)
*rpcm = NULL;
static void usX2Y_error_sequence(struct usX2Ydev *usX2Y,
struct snd_usX2Y_substream *subs, struct urb *urb)
{
- snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
- KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n"
- KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n",
+ snd_printk(KERN_ERR
+"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
+"Most propably some urb of usb-frame %i is still missing.\n"
+"Cause could be too long delays in usb-hcd interrupt handling.\n",
usb_get_current_frame_number(usX2Y->chip.dev),
subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff