#include <linux/crc32.h>
#include "dr_ste.h"
-#define DR_STE_ENABLE_FLOW_TAG BIT(31)
-
-enum dr_ste_tunl_action {
- DR_STE_TUNL_ACTION_NONE = 0,
- DR_STE_TUNL_ACTION_ENABLE = 1,
- DR_STE_TUNL_ACTION_DECAP = 2,
- DR_STE_TUNL_ACTION_L3_DECAP = 3,
- DR_STE_TUNL_ACTION_POP_VLAN = 4,
-};
-
-enum dr_ste_action_type {
- DR_STE_ACTION_TYPE_PUSH_VLAN = 1,
- DR_STE_ACTION_TYPE_ENCAP_L3 = 3,
- DR_STE_ACTION_TYPE_ENCAP = 4,
-};
-
struct dr_hw_ste_format {
u8 ctrl[DR_STE_SIZE_CTRL];
u8 tag[DR_STE_SIZE_TAG];
memcpy(hw_ste->mask, bit_mask, DR_STE_SIZE_MASK);
}
-static void dr_ste_rx_set_flow_tag(u8 *hw_ste_p, u32 flow_tag)
-{
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, qp_list_pointer,
- DR_STE_ENABLE_FLOW_TAG | flow_tag);
-}
-
-static void dr_ste_set_counter_id(u8 *hw_ste_p, u32 ctr_id)
-{
- /* This can be used for both rx_steering_mult and for sx_transmit */
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, counter_trigger_15_0, ctr_id);
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, counter_trigger_23_16, ctr_id >> 16);
-}
-
-static void dr_ste_set_go_back_bit(u8 *hw_ste_p)
-{
- MLX5_SET(ste_sx_transmit, hw_ste_p, go_back, 1);
-}
-
-static void dr_ste_set_tx_push_vlan(u8 *hw_ste_p, u32 vlan_hdr,
- bool go_back)
-{
- MLX5_SET(ste_sx_transmit, hw_ste_p, action_type,
- DR_STE_ACTION_TYPE_PUSH_VLAN);
- MLX5_SET(ste_sx_transmit, hw_ste_p, encap_pointer_vlan_data, vlan_hdr);
- /* Due to HW limitation we need to set this bit, otherwise reforamt +
- * push vlan will not work.
- */
- if (go_back)
- dr_ste_set_go_back_bit(hw_ste_p);
-}
-
-static void dr_ste_set_tx_encap(void *hw_ste_p, u32 reformat_id,
- int size, bool encap_l3)
-{
- MLX5_SET(ste_sx_transmit, hw_ste_p, action_type,
- encap_l3 ? DR_STE_ACTION_TYPE_ENCAP_L3 : DR_STE_ACTION_TYPE_ENCAP);
- /* The hardware expects here size in words (2 byte) */
- MLX5_SET(ste_sx_transmit, hw_ste_p, action_description, size / 2);
- MLX5_SET(ste_sx_transmit, hw_ste_p, encap_pointer_vlan_data, reformat_id);
-}
-
-static void dr_ste_set_rx_decap(u8 *hw_ste_p)
-{
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
- DR_STE_TUNL_ACTION_DECAP);
-}
-
-static void dr_ste_set_rx_pop_vlan(u8 *hw_ste_p)
-{
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
- DR_STE_TUNL_ACTION_POP_VLAN);
-}
-
-static void dr_ste_set_rx_decap_l3(u8 *hw_ste_p, bool vlan)
-{
- MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
- DR_STE_TUNL_ACTION_L3_DECAP);
- MLX5_SET(ste_modify_packet, hw_ste_p, action_description, vlan ? 1 : 0);
-}
-
-static void dr_ste_set_entry_type(u8 *hw_ste_p, u8 entry_type)
-{
- MLX5_SET(ste_general, hw_ste_p, entry_type, entry_type);
-}
-
-static u8 dr_ste_get_entry_type(u8 *hw_ste_p)
-{
- return MLX5_GET(ste_general, hw_ste_p, entry_type);
-}
-
-static void dr_ste_set_rewrite_actions(u8 *hw_ste_p, u16 num_of_actions,
- u32 re_write_index)
-{
- MLX5_SET(ste_modify_packet, hw_ste_p, number_of_re_write_actions,
- num_of_actions);
- MLX5_SET(ste_modify_packet, hw_ste_p, header_re_write_actions_pointer,
- re_write_index);
-}
-
-static void dr_ste_set_hit_gvmi(u8 *hw_ste_p, u16 gvmi)
-{
- MLX5_SET(ste_general, hw_ste_p, next_table_base_63_48, gvmi);
-}
-
static void dr_ste_set_always_hit(struct dr_hw_ste_format *hw_ste)
{
memset(&hw_ste->tag, 0, sizeof(hw_ste->tag));
return 0;
}
-static void dr_ste_arr_init_next_ste(struct mlx5dr_ste_ctx *ste_ctx,
- u8 **last_ste,
- u32 *added_stes,
- enum mlx5dr_ste_entry_type entry_type,
- u16 gvmi)
-{
- (*added_stes)++;
- *last_ste += DR_STE_SIZE;
- ste_ctx->ste_init(*last_ste, MLX5DR_STE_LU_TYPE_DONT_CARE, entry_type, gvmi);
-}
-
void mlx5dr_ste_set_actions_tx(struct mlx5dr_ste_ctx *ste_ctx,
struct mlx5dr_domain *dmn,
u8 *action_type_set,
- u8 *last_ste,
+ u8 *hw_ste_arr,
struct mlx5dr_ste_actions_attr *attr,
u32 *added_stes)
{
- bool encap = action_type_set[DR_ACTION_TYP_L2_TO_TNL_L2] ||
- action_type_set[DR_ACTION_TYP_L2_TO_TNL_L3];
-
- /* We want to make sure the modify header comes before L2
- * encapsulation. The reason for that is that we support
- * modify headers for outer headers only
- */
- if (action_type_set[DR_ACTION_TYP_MODIFY_HDR]) {
- dr_ste_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
- dr_ste_set_rewrite_actions(last_ste,
- attr->modify_actions,
- attr->modify_index);
- }
-
- if (action_type_set[DR_ACTION_TYP_PUSH_VLAN]) {
- int i;
-
- for (i = 0; i < attr->vlans.count; i++) {
- if (i || action_type_set[DR_ACTION_TYP_MODIFY_HDR])
- dr_ste_arr_init_next_ste(ste_ctx,
- &last_ste,
- added_stes,
- MLX5DR_STE_TYPE_TX,
- attr->gvmi);
-
- dr_ste_set_tx_push_vlan(last_ste,
- attr->vlans.headers[i],
- encap);
- }
- }
-
- if (encap) {
- /* Modify header and encapsulation require a different STEs.
- * Since modify header STE format doesn't support encapsulation
- * tunneling_action.
- */
- if (action_type_set[DR_ACTION_TYP_MODIFY_HDR] ||
- action_type_set[DR_ACTION_TYP_PUSH_VLAN])
- dr_ste_arr_init_next_ste(ste_ctx,
- &last_ste,
- added_stes,
- MLX5DR_STE_TYPE_TX,
- attr->gvmi);
-
- dr_ste_set_tx_encap(last_ste,
- attr->reformat_id,
- attr->reformat_size,
- action_type_set[DR_ACTION_TYP_L2_TO_TNL_L3]);
- /* Whenever prio_tag_required enabled, we can be sure that the
- * previous table (ACL) already push vlan to our packet,
- * And due to HW limitation we need to set this bit, otherwise
- * push vlan + reformat will not work.
- */
- if (MLX5_CAP_GEN(dmn->mdev, prio_tag_required))
- dr_ste_set_go_back_bit(last_ste);
- }
-
- if (action_type_set[DR_ACTION_TYP_CTR])
- dr_ste_set_counter_id(last_ste, attr->ctr_id);
-
- dr_ste_set_hit_gvmi(last_ste, attr->hit_gvmi);
- mlx5dr_ste_set_hit_addr(ste_ctx, last_ste, attr->final_icm_addr, 1);
+ ste_ctx->set_actions_tx(dmn, action_type_set, hw_ste_arr,
+ attr, added_stes);
}
void mlx5dr_ste_set_actions_rx(struct mlx5dr_ste_ctx *ste_ctx,
struct mlx5dr_domain *dmn,
u8 *action_type_set,
- u8 *last_ste,
+ u8 *hw_ste_arr,
struct mlx5dr_ste_actions_attr *attr,
u32 *added_stes)
{
- if (action_type_set[DR_ACTION_TYP_CTR])
- dr_ste_set_counter_id(last_ste, attr->ctr_id);
-
- if (action_type_set[DR_ACTION_TYP_TNL_L3_TO_L2]) {
- dr_ste_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
- dr_ste_set_rx_decap_l3(last_ste, attr->decap_with_vlan);
- dr_ste_set_rewrite_actions(last_ste,
- attr->decap_actions,
- attr->decap_index);
- }
-
- if (action_type_set[DR_ACTION_TYP_TNL_L2_TO_L2])
- dr_ste_set_rx_decap(last_ste);
-
- if (action_type_set[DR_ACTION_TYP_POP_VLAN]) {
- int i;
-
- for (i = 0; i < attr->vlans.count; i++) {
- if (i ||
- action_type_set[DR_ACTION_TYP_TNL_L2_TO_L2] ||
- action_type_set[DR_ACTION_TYP_TNL_L3_TO_L2])
- dr_ste_arr_init_next_ste(ste_ctx,
- &last_ste,
- added_stes,
- MLX5DR_STE_TYPE_RX,
- attr->gvmi);
-
- dr_ste_set_rx_pop_vlan(last_ste);
- }
- }
-
- if (action_type_set[DR_ACTION_TYP_MODIFY_HDR]) {
- if (dr_ste_get_entry_type(last_ste) == MLX5DR_STE_TYPE_MODIFY_PKT)
- dr_ste_arr_init_next_ste(ste_ctx,
- &last_ste,
- added_stes,
- MLX5DR_STE_TYPE_MODIFY_PKT,
- attr->gvmi);
- else
- dr_ste_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
-
- dr_ste_set_rewrite_actions(last_ste,
- attr->modify_actions,
- attr->modify_index);
- }
-
- if (action_type_set[DR_ACTION_TYP_TAG]) {
- if (dr_ste_get_entry_type(last_ste) == MLX5DR_STE_TYPE_MODIFY_PKT)
- dr_ste_arr_init_next_ste(ste_ctx,
- &last_ste,
- added_stes,
- MLX5DR_STE_TYPE_RX,
- attr->gvmi);
-
- dr_ste_rx_set_flow_tag(last_ste, attr->flow_tag);
- }
-
- dr_ste_set_hit_gvmi(last_ste, attr->hit_gvmi);
- mlx5dr_ste_set_hit_addr(ste_ctx, last_ste, attr->final_icm_addr, 1);
+ ste_ctx->set_actions_rx(dmn, action_type_set, hw_ste_arr,
+ attr, added_stes);
}
int mlx5dr_ste_build_pre_check(struct mlx5dr_domain *dmn,
#include <linux/crc32.h>
#include "dr_ste.h"
+#define DR_STE_ENABLE_FLOW_TAG BIT(31)
+
+enum dr_ste_tunl_action {
+ DR_STE_TUNL_ACTION_NONE = 0,
+ DR_STE_TUNL_ACTION_ENABLE = 1,
+ DR_STE_TUNL_ACTION_DECAP = 2,
+ DR_STE_TUNL_ACTION_L3_DECAP = 3,
+ DR_STE_TUNL_ACTION_POP_VLAN = 4,
+};
+
+enum dr_ste_action_type {
+ DR_STE_ACTION_TYPE_PUSH_VLAN = 1,
+ DR_STE_ACTION_TYPE_ENCAP_L3 = 3,
+ DR_STE_ACTION_TYPE_ENCAP = 4,
+};
+
#define DR_STE_CALC_LU_TYPE(lookup_type, rx, inner) \
((inner) ? DR_STE_V0_LU_TYPE_##lookup_type##_I : \
(rx) ? DR_STE_V0_LU_TYPE_##lookup_type##_D : \
DR_STE_V0_LU_TYPE_DONT_CARE = MLX5DR_STE_LU_TYPE_DONT_CARE,
};
+static void dr_ste_v0_set_entry_type(u8 *hw_ste_p, u8 entry_type)
+{
+ MLX5_SET(ste_general, hw_ste_p, entry_type, entry_type);
+}
+
+static u8 dr_ste_v0_get_entry_type(u8 *hw_ste_p)
+{
+ return MLX5_GET(ste_general, hw_ste_p, entry_type);
+}
+
static void dr_ste_v0_set_miss_addr(u8 *hw_ste_p, u64 miss_addr)
{
u64 index = miss_addr >> 6;
return MLX5_GET(ste_general, hw_ste_p, next_lu_type);
}
+static void dr_ste_v0_set_hit_gvmi(u8 *hw_ste_p, u16 gvmi)
+{
+ MLX5_SET(ste_general, hw_ste_p, next_table_base_63_48, gvmi);
+}
+
static void dr_ste_v0_set_hit_addr(u8 *hw_ste_p, u64 icm_addr, u32 ht_size)
{
u64 index = (icm_addr >> 5) | ht_size;
static void dr_ste_v0_init(u8 *hw_ste_p, u16 lu_type,
u8 entry_type, u16 gvmi)
{
- MLX5_SET(ste_general, hw_ste_p, entry_type, entry_type);
+ dr_ste_v0_set_entry_type(hw_ste_p, entry_type);
dr_ste_v0_set_lu_type(hw_ste_p, lu_type);
dr_ste_v0_set_next_lu_type(hw_ste_p, MLX5DR_STE_LU_TYPE_DONT_CARE);
MLX5_SET(ste_rx_steering_mult, hw_ste_p, miss_address_63_48, gvmi);
}
+static void dr_ste_v0_rx_set_flow_tag(u8 *hw_ste_p, u32 flow_tag)
+{
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, qp_list_pointer,
+ DR_STE_ENABLE_FLOW_TAG | flow_tag);
+}
+
+static void dr_ste_v0_set_counter_id(u8 *hw_ste_p, u32 ctr_id)
+{
+ /* This can be used for both rx_steering_mult and for sx_transmit */
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, counter_trigger_15_0, ctr_id);
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, counter_trigger_23_16, ctr_id >> 16);
+}
+
+static void dr_ste_v0_set_go_back_bit(u8 *hw_ste_p)
+{
+ MLX5_SET(ste_sx_transmit, hw_ste_p, go_back, 1);
+}
+
+static void dr_ste_v0_set_tx_push_vlan(u8 *hw_ste_p, u32 vlan_hdr,
+ bool go_back)
+{
+ MLX5_SET(ste_sx_transmit, hw_ste_p, action_type,
+ DR_STE_ACTION_TYPE_PUSH_VLAN);
+ MLX5_SET(ste_sx_transmit, hw_ste_p, encap_pointer_vlan_data, vlan_hdr);
+ /* Due to HW limitation we need to set this bit, otherwise reforamt +
+ * push vlan will not work.
+ */
+ if (go_back)
+ dr_ste_v0_set_go_back_bit(hw_ste_p);
+}
+
+static void dr_ste_v0_set_tx_encap(void *hw_ste_p, u32 reformat_id,
+ int size, bool encap_l3)
+{
+ MLX5_SET(ste_sx_transmit, hw_ste_p, action_type,
+ encap_l3 ? DR_STE_ACTION_TYPE_ENCAP_L3 : DR_STE_ACTION_TYPE_ENCAP);
+ /* The hardware expects here size in words (2 byte) */
+ MLX5_SET(ste_sx_transmit, hw_ste_p, action_description, size / 2);
+ MLX5_SET(ste_sx_transmit, hw_ste_p, encap_pointer_vlan_data, reformat_id);
+}
+
+static void dr_ste_v0_set_rx_decap(u8 *hw_ste_p)
+{
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
+ DR_STE_TUNL_ACTION_DECAP);
+}
+
+static void dr_ste_v0_set_rx_pop_vlan(u8 *hw_ste_p)
+{
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
+ DR_STE_TUNL_ACTION_POP_VLAN);
+}
+
+static void dr_ste_v0_set_rx_decap_l3(u8 *hw_ste_p, bool vlan)
+{
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
+ DR_STE_TUNL_ACTION_L3_DECAP);
+ MLX5_SET(ste_modify_packet, hw_ste_p, action_description, vlan ? 1 : 0);
+}
+
+static void dr_ste_v0_set_rewrite_actions(u8 *hw_ste_p, u16 num_of_actions,
+ u32 re_write_index)
+{
+ MLX5_SET(ste_modify_packet, hw_ste_p, number_of_re_write_actions,
+ num_of_actions);
+ MLX5_SET(ste_modify_packet, hw_ste_p, header_re_write_actions_pointer,
+ re_write_index);
+}
+
+static void dr_ste_v0_arr_init_next(u8 **last_ste,
+ u32 *added_stes,
+ enum mlx5dr_ste_entry_type entry_type,
+ u16 gvmi)
+{
+ (*added_stes)++;
+ *last_ste += DR_STE_SIZE;
+ dr_ste_v0_init(*last_ste, MLX5DR_STE_LU_TYPE_DONT_CARE,
+ entry_type, gvmi);
+}
+
+static void
+dr_ste_v0_set_actions_tx(struct mlx5dr_domain *dmn,
+ u8 *action_type_set,
+ u8 *last_ste,
+ struct mlx5dr_ste_actions_attr *attr,
+ u32 *added_stes)
+{
+ bool encap = action_type_set[DR_ACTION_TYP_L2_TO_TNL_L2] ||
+ action_type_set[DR_ACTION_TYP_L2_TO_TNL_L3];
+
+ /* We want to make sure the modify header comes before L2
+ * encapsulation. The reason for that is that we support
+ * modify headers for outer headers only
+ */
+ if (action_type_set[DR_ACTION_TYP_MODIFY_HDR]) {
+ dr_ste_v0_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
+ dr_ste_v0_set_rewrite_actions(last_ste,
+ attr->modify_actions,
+ attr->modify_index);
+ }
+
+ if (action_type_set[DR_ACTION_TYP_PUSH_VLAN]) {
+ int i;
+
+ for (i = 0; i < attr->vlans.count; i++) {
+ if (i || action_type_set[DR_ACTION_TYP_MODIFY_HDR])
+ dr_ste_v0_arr_init_next(&last_ste,
+ added_stes,
+ MLX5DR_STE_TYPE_TX,
+ attr->gvmi);
+
+ dr_ste_v0_set_tx_push_vlan(last_ste,
+ attr->vlans.headers[i],
+ encap);
+ }
+ }
+
+ if (encap) {
+ /* Modify header and encapsulation require a different STEs.
+ * Since modify header STE format doesn't support encapsulation
+ * tunneling_action.
+ */
+ if (action_type_set[DR_ACTION_TYP_MODIFY_HDR] ||
+ action_type_set[DR_ACTION_TYP_PUSH_VLAN])
+ dr_ste_v0_arr_init_next(&last_ste,
+ added_stes,
+ MLX5DR_STE_TYPE_TX,
+ attr->gvmi);
+
+ dr_ste_v0_set_tx_encap(last_ste,
+ attr->reformat_id,
+ attr->reformat_size,
+ action_type_set[DR_ACTION_TYP_L2_TO_TNL_L3]);
+ /* Whenever prio_tag_required enabled, we can be sure that the
+ * previous table (ACL) already push vlan to our packet,
+ * And due to HW limitation we need to set this bit, otherwise
+ * push vlan + reformat will not work.
+ */
+ if (MLX5_CAP_GEN(dmn->mdev, prio_tag_required))
+ dr_ste_v0_set_go_back_bit(last_ste);
+ }
+
+ if (action_type_set[DR_ACTION_TYP_CTR])
+ dr_ste_v0_set_counter_id(last_ste, attr->ctr_id);
+
+ dr_ste_v0_set_hit_gvmi(last_ste, attr->hit_gvmi);
+ dr_ste_v0_set_hit_addr(last_ste, attr->final_icm_addr, 1);
+}
+
+static void
+dr_ste_v0_set_actions_rx(struct mlx5dr_domain *dmn,
+ u8 *action_type_set,
+ u8 *last_ste,
+ struct mlx5dr_ste_actions_attr *attr,
+ u32 *added_stes)
+{
+ if (action_type_set[DR_ACTION_TYP_CTR])
+ dr_ste_v0_set_counter_id(last_ste, attr->ctr_id);
+
+ if (action_type_set[DR_ACTION_TYP_TNL_L3_TO_L2]) {
+ dr_ste_v0_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
+ dr_ste_v0_set_rx_decap_l3(last_ste, attr->decap_with_vlan);
+ dr_ste_v0_set_rewrite_actions(last_ste,
+ attr->decap_actions,
+ attr->decap_index);
+ }
+
+ if (action_type_set[DR_ACTION_TYP_TNL_L2_TO_L2])
+ dr_ste_v0_set_rx_decap(last_ste);
+
+ if (action_type_set[DR_ACTION_TYP_POP_VLAN]) {
+ int i;
+
+ for (i = 0; i < attr->vlans.count; i++) {
+ if (i ||
+ action_type_set[DR_ACTION_TYP_TNL_L2_TO_L2] ||
+ action_type_set[DR_ACTION_TYP_TNL_L3_TO_L2])
+ dr_ste_v0_arr_init_next(&last_ste,
+ added_stes,
+ MLX5DR_STE_TYPE_RX,
+ attr->gvmi);
+
+ dr_ste_v0_set_rx_pop_vlan(last_ste);
+ }
+ }
+
+ if (action_type_set[DR_ACTION_TYP_MODIFY_HDR]) {
+ if (dr_ste_v0_get_entry_type(last_ste) == MLX5DR_STE_TYPE_MODIFY_PKT)
+ dr_ste_v0_arr_init_next(&last_ste,
+ added_stes,
+ MLX5DR_STE_TYPE_MODIFY_PKT,
+ attr->gvmi);
+ else
+ dr_ste_v0_set_entry_type(last_ste, MLX5DR_STE_TYPE_MODIFY_PKT);
+
+ dr_ste_v0_set_rewrite_actions(last_ste,
+ attr->modify_actions,
+ attr->modify_index);
+ }
+
+ if (action_type_set[DR_ACTION_TYP_TAG]) {
+ if (dr_ste_v0_get_entry_type(last_ste) == MLX5DR_STE_TYPE_MODIFY_PKT)
+ dr_ste_v0_arr_init_next(&last_ste,
+ added_stes,
+ MLX5DR_STE_TYPE_RX,
+ attr->gvmi);
+
+ dr_ste_v0_rx_set_flow_tag(last_ste, attr->flow_tag);
+ }
+
+ dr_ste_v0_set_hit_gvmi(last_ste, attr->hit_gvmi);
+ dr_ste_v0_set_hit_addr(last_ste, attr->final_icm_addr, 1);
+}
+
static void
dr_ste_v0_build_eth_l2_src_dst_bit_mask(struct mlx5dr_match_param *value,
bool inner, u8 *bit_mask)
.set_hit_addr = &dr_ste_v0_set_hit_addr,
.set_byte_mask = &dr_ste_v0_set_byte_mask,
.get_byte_mask = &dr_ste_v0_get_byte_mask,
+
+ /* Actions */
+ .set_actions_rx = &dr_ste_v0_set_actions_rx,
+ .set_actions_tx = &dr_ste_v0_set_actions_tx,
};
projects / platform / kernel / linux-rpi.git / commitdiff