HID: sony: Fix multi-line comment styling

Convert multi-line comments to comply with the kernel coding style.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 526705f..26992e1 100644 (file)
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -17,7 +17,8 @@
  * any later version.
  */
 
-/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
+/*
+ * NOTE: in order for the Sony PS3 BD Remote Control to be found by
  * a Bluetooth host, the key combination Start+Enter has to be kept pressed
  * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
  *
@@ -81,7 +82,8 @@ static const u8 sixaxis_rdesc_fixup2[] = {
        0xb1, 0x02, 0xc0, 0xc0,
 };
 
-/* The default descriptor doesn't provide mapping for the accelerometers
+/*
+ * The default descriptor doesn't provide mapping for the accelerometers
  * or orientation sensors.  This fixed descriptor maps the accelerometers
  * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
  * to usage values 0x43, 0x44 and 0x45.
@@ -340,7 +342,8 @@ static u8 dualshock4_usb_rdesc[] = {
        0xC0                /*  End Collection                      */
 };
 
-/* The default behavior of the Dualshock 4 is to send reports using report
+/*
+ * The default behavior of the Dualshock 4 is to send reports using report
  * type 1 when running over Bluetooth. However, as soon as it receives a
  * report of type 17 to set the LEDs or rumble it starts returning it's state
  * in report 17 instead of 1.  Since report 17 is undefined in the default HID
@@ -667,7 +670,8 @@ static const unsigned int ps3remote_keymap_remote_buttons[] = {
 };
 
 static const unsigned int buzz_keymap[] = {
-       /* The controller has 4 remote buzzers, each with one LED and 5
+       /*
+        * The controller has 4 remote buzzers, each with one LED and 5
         * buttons.
         * 
         * We use the mapping chosen by the controller, which is:
@@ -838,7 +842,8 @@ static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size)
        unsigned long flags;
        __u8 cable_state, battery_capacity, battery_charging;
 
-       /* The sixaxis is charging if the battery value is 0xee
+       /*
+        * The sixaxis is charging if the battery value is 0xee
         * and it is fully charged if the value is 0xef.
         * It does not report the actual level while charging so it
         * is set to 100% while charging is in progress.
@@ -868,18 +873,21 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
        int n, offset;
        __u8 cable_state, battery_capacity, battery_charging;
 
-       /* Battery and touchpad data starts at byte 30 in the USB report and
+       /*
+        * Battery and touchpad data starts at byte 30 in the USB report and
         * 32 in Bluetooth report.
         */
        offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;
 
-       /* The lower 4 bits of byte 30 contain the battery level
+       /*
+        * The lower 4 bits of byte 30 contain the battery level
         * and the 5th bit contains the USB cable state.
         */
        cable_state = (rd[offset] >> 4) & 0x01;
        battery_capacity = rd[offset] & 0x0F;
 
-       /* When a USB power source is connected the battery level ranges from
+       /*
+        * When a USB power source is connected the battery level ranges from
         * 0 to 10, and when running on battery power it ranges from 0 to 9.
         * A battery level above 10 when plugged in means charge completed.
         */
@@ -903,7 +911,8 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
 
        offset += 5;
 
-       /* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
+       /*
+        * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
         * and 37 on Bluetooth.
         * The first 7 bits of the first byte is a counter and bit 8 is a touch
         * indicator that is 0 when pressed and 1 when not pressed.
@@ -932,7 +941,8 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 {
        struct sony_sc *sc = hid_get_drvdata(hdev);
 
-       /* Sixaxis HID report has acclerometers/gyro with MSByte first, this
+       /*
+        * Sixaxis HID report has acclerometers/gyro with MSByte first, this
         * has to be BYTE_SWAPPED before passing up to joystick interface
         */
        if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
@@ -1057,7 +1067,8 @@ static int sixaxis_set_operational_bt(struct hid_device *hdev)
                                     HID_FEATURE_REPORT);
 }
 
-/* Requesting feature report 0x02 in Bluetooth mode changes the state of the
+/*
+ * Requesting feature report 0x02 in Bluetooth mode changes the state of the
  * controller so that it sends full input reports of type 0x11.
  */
 static int dualshock4_set_operational_bt(struct hid_device *hdev)
@@ -1211,9 +1222,11 @@ static int sony_leds_init(struct hid_device *hdev)
                name_fmt = "%s::sony%d";
        }
 
-       /* Clear LEDs as we have no way of reading their initial state. This is
+       /*
+        * Clear LEDs as we have no way of reading their initial state. This is
         * only relevant if the driver is loaded after somebody actively set the
-        * LEDs to on */
+        * LEDs to on
+        */
        sony_set_leds(hdev, initial_values, drv_data->led_count);
 
        name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
@@ -1420,7 +1433,8 @@ static int sony_battery_probe(struct sony_sc *sc)
        struct hid_device *hdev = sc->hdev;
        int ret;
 
-       /* Set the default battery level to 100% to avoid low battery warnings
+       /*
+        * Set the default battery level to 100% to avoid low battery warnings
         * if the battery is polled before the first device report is received.
         */
        sc->battery_capacity = 100;
@@ -1533,7 +1547,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
                                goto err_stop;
                        }
                }
-               /* The Dualshock 4 touchpad supports 2 touches and has a
+               /*
+                * The Dualshock 4 touchpad supports 2 touches and has a
                 * resolution of 1920x940.
                 */
                ret = sony_register_touchpad(sc, 2, 1920, 940);