LAN91C96: Enable NET_MULTI LAN driver
authorNishanth Menon <nm@ti.com>
Fri, 16 Oct 2009 05:06:37 +0000 (00:06 -0500)
committerBen Warren <biggerbadderben@gmail.com>
Mon, 14 Dec 2009 05:31:26 +0000 (21:31 -0800)
This modification is NOT tested on any of the
platforms modified as I dont have them. please
help by testing+building+fixing

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13 files changed:
board/apollon/apollon.c
include/configs/B2.h
include/configs/apollon.h
include/configs/assabet.h
include/configs/gcplus.h
include/configs/lubbock.h
include/configs/omap1510inn.h
include/configs/omap1610h2.h
include/configs/omap1610inn.h
include/configs/omap2420h4.h
include/configs/omap5912osk.h
include/configs/omap730p2.h
include/configs/pleb2.h

index 8964eba..b93e880 100644 (file)
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 #include <asm/arch/omap2420.h>
 #include <asm/io.h>
 #include <asm/arch/bits.h>
@@ -138,13 +139,14 @@ void wait_for_command_complete(unsigned int wd_base)
 }
 
 /*******************************************************************
- * Routine:ether_init
+ * Routine:board_eth_init
  * Description: take the Ethernet controller out of reset and wait
  *                for the EEPROM load to complete.
  ******************************************************************/
-void ether_init(void)
+int board_eth_init(bd_t *bis)
 {
-#ifdef CONFIG_DRIVER_LAN91C96
+       int rc = 0;
+#ifdef CONFIG_LAN91C96
        int cnt = 20;
 
        __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
@@ -171,10 +173,10 @@ void ether_init(void)
 
        mask_config_reg(ETH_CONTROL_REG, 0x01);
        udelay(1000);
-
+       rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
 eth_reset_err_out:
-       return;
 #endif
+       return rc;
 }
 
 /**********************************************
index e5439f3..d7806e9 100644 (file)
@@ -58,7 +58,7 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE           0x04000300 /* base address         */
 #define CONFIG_SMC_USE_32_BIT
 #undef  CONFIG_SHOW_ACTIVITY
index adab454..ed14f7a 100644 (file)
@@ -88,7 +88,8 @@
 /*
  * SMC91c96 Etherent
  */
-#define        CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define        CONFIG_LAN91C96
 #define        CONFIG_LAN91C96_BASE    (APOLLON_CS1_BASE+0x300)
 #define        CONFIG_LAN91C96_EXT_PHY
 
index 8c5b84c..d17d4bd 100644 (file)
@@ -53,7 +53,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96        /* we have an SMC9194 on-board */
 #define CONFIG_LAN91C96_BASE   0x18000000
 
 /*
index 85db4f5..41294b9 100644 (file)
@@ -66,7 +66,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96        /* we have an SMC9194 on-board */
 #define CONFIG_LAN91C96_BASE   0x100e0000
 
 /*
index 43913ca..0a69210 100644 (file)
@@ -58,7 +58,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
 /*
index 8408209..b0ebafd 100644 (file)
@@ -60,7 +60,8 @@
 #define CONFIG_SMC9196_BASE 0x08000300
 #define CONFIG_SMC9196_EXT_PHY
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x08000300
 #define CONFIG_LAN91C96_EXT_PHY
 
index 42e0198..0bbb5b3 100644 (file)
@@ -57,7 +57,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 
index 22c873e..832dd42 100644 (file)
@@ -58,7 +58,8 @@
  */
 /*
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 
index 9c18842..6ab4438 100644 (file)
@@ -81,7 +81,8 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE     (H4_CS1_BASE+0x300)
 #define CONFIG_LAN91C96_EXT_PHY
 
index d0ce9dc..bc660e3 100644 (file)
@@ -61,7 +61,8 @@
  */
 /*
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04800300
 #define CONFIG_LAN91C96_EXT_PHY
 
index 32a9b23..a6a8a02 100644 (file)
@@ -65,7 +65,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE      0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 
index 635ef71..9e69411 100644 (file)
  */
 
 /* None - PLEB 2 doesn't have any of this.
-   #define CONFIG_DRIVER_LAN91C96
-   #define CONFIG_LAN91C96_BASE 0x0C000000 */
+       #define CONFIG_NET_MULTI
+       #define CONFIG_LAN91C96
+       #define CONFIG_LAN91C96_BASE 0x0C000000
+ */
 
 /*
  * select serial console configuration