arm64: dts: add support for S4 based Amlogic AQ222

Add basic support for the Amlogic S4 based Amlogic AQ222 board:
which describe components as follows: CPU, GIC, IRQ, Timer, UART.
It's capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed memory unit address warning]
Link: https://lore.kernel.org/r/20220106112214.6987-1-xianwei.zhao@amlogic.com

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 868d740..13f73ca 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -62,3 +62,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644 (file)
index 0000000..8ffbcb2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+       model = "Amlogic Meson S4 AQ222 Development Board";
+       compatible = "amlogic,aq222", "amlogic,s4";
+       interrupt-parent = <&gic>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       aliases {
+               serial0 = &uart_B;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x0 0x0 0x40000000>;
+       };
+
+};
+
+&uart_B {
+       status = "okay";
+};

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644 (file)
index 0000000..bf9ae1e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a35","arm,armv8";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+               };
+
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a35","arm,armv8";
+                       reg = <0x0 0x1>;
+                       enable-method = "psci";
+               };
+
+               cpu2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a35","arm,armv8";
+                       reg = <0x0 0x2>;
+                       enable-method = "psci";
+               };
+
+               cpu3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a35","arm,armv8";
+                       reg = <0x0 0x3>;
+                       enable-method = "psci";
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       xtal: xtal-clk {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "xtal";
+               #clock-cells = <0>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               gic: interrupt-controller@fff01000 {
+                       compatible = "arm,gic-400";
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       interrupt-controller;
+                       reg = <0x0 0xfff01000 0 0x1000>,
+                             <0x0 0xfff02000 0 0x2000>,
+                             <0x0 0xfff04000 0 0x2000>,
+                             <0x0 0xfff06000 0 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               };
+
+               apb4: apb4@fe000000 {
+                       compatible = "simple-bus";
+                       reg = <0x0 0xfe000000 0x0 0x480000>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+                       uart_B: serial@7a000 {
+                               compatible = "amlogic,meson-s4-uart",
+                                            "amlogic,meson-ao-uart";
+                               reg = <0x0 0x7a000 0x0 0x18>;
+                               interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+                               status = "disabled";
+                               clocks = <&xtal>, <&xtal>, <&xtal>;
+                               clock-names = "xtal", "pclk", "baud";
+                       };
+               };
+       };
+};