--- /dev/null
+#!/bin/sh
+# We depend on network modules being loaded
+[ "$1" = "-d" ] && echo network
+
+# If hostonly was requested, fail the check if we are not actually
+# booting from root.
+#[ "$1" = "-h" ] && ! egrep -q '/ /dev/nbd[0-9]*' /proc/mounts && exit 1
+
+# If our prerequisites are not met, fail anyways.
+which iscsistart hostname >/dev/null 2>&1 || exit 1
+exit 0
--- /dev/null
+#!/bin/bash
+
+inst iscsistart
+inst hostname
+inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
+inst_hook netroot 90 "$moddir/iscsi-netroot.sh"
+inst "$moddir/iscsiroot" "/sbin/iscsiroot"
+instmods iscsi_tcp crc32c
--- /dev/null
+if [ "$root" = "dhcp" ]; then
+ if [ -n "$new_root_path" -a -z "${new_root_path%%iscsi:*}" ]; then
+ root="$new_root_path"
+ fi
+fi
+
+if [ -z "${root%iscsi:*}" ]; then
+ handler=/sbin/iscsiroot
+fi
+
+if getarg iscsiroot >/dev/null; then
+ handler=/sbin/iscsiroot
+fi
--- /dev/null
+#!/bin/sh
+
+. /lib/dracut-lib
+
+PATH=$PATH:/sbin:/usr/sbin
+
+# XXX needs error handling like ifup/dhclient-script
+
+if getarg rdnetdebug; then
+ exec > /tmp/iscsiroot.$1.$$.out
+ exec 2>> /tmp/iscsiroot.$1.$$.out
+ set -x
+fi
+
+exec > /dev/console
+exec 2>/dev/console
+set -x
+
+# read static conf settings
+for conf in conf/conf.d/*; do
+ [ -f ${conf} ] && . ${conf}
+done
+
+# root is in the form root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+netif="$1"
+root="$2"
+
+
+if [ $root = ${root#iscsi:} ]; then
+ root=$(getarg iscsiroot)
+else
+ root=${root#iscsi:}
+fi
+
+if getarg iscsi_firmware >/dev/null; then
+ modprobe iscsi_tcp
+ modprobe crc32c
+ iscsistart -b
+else
+ OLDIFS="$IFS"
+ IFS=:
+ set $root
+
+ iscsi_target_ip=$1; shift
+ iscsi_protocol=$1; shift # ignored
+ iscsi_target_port=$1; shift
+ iscsi_lun=$1; shift
+ iscsi_target_name=$*
+ IFS="$OLDIFS"
+
+ # override conf settings by command line options
+ arg=$(getarg iscsi_initiator)
+ [ -n "$arg" ] && iscsi_initiator=$arg
+ arg=$(getarg iscsi_initiator)
+ [ -n "$arg" ] && iscsi_target_name=$arg
+ arg=$(getarg iscsi_target_ip)
+ [ -n "$arg" ] && iscsi_target_ip=$arg
+ arg=$(getarg iscsi_target_port)
+ [ -n "$arg" ] && iscsi_target_port=$arg
+ arg=$(getarg iscsi_target_group)
+ [ -n "$arg" ] && iscsi_target_group=$arg
+ arg=$(getarg iscsi_username)
+ [ -n "$arg" ] && iscsi_username=$arg
+ arg=$(getarg iscsi_password)
+ [ -n "$arg" ] && iscsi_password=$arg
+ arg=$(getarg iscsi_in_username)
+ [ -n "$arg" ] && iscsi_in_username=$arg
+ arg=$(getarg iscsi_in_password)
+ [ -n "$arg" ] && iscsi_in_password=$arg
+
+ getarg ro && iscsirw=ro
+ getarg rw && iscsirw=rw
+ fsopts=${fsopts+$fsopts,}${iscsirw}
+
+ modprobe iscsi_tcp
+ modprobe crc32c
+
+ if [ -z $iscsi_initiator ]; then
+ [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
+ [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
+ iscsi_initiator=$InitiatorName
+ fi
+
+ if [ -z $iscsi_target_port ]; then
+ iscsi_target_port=3260
+ fi
+
+ if [ -z $iscsi_target_group ]; then
+ iscsi_target_group=1
+ fi
+
+ if [ -z $iscsi_initiator ]; then
+ [ -f /tmp/net.$netif.dhcpopts ] && . /tmp/net.$netif.dhcpopts
+ hostname=$new_host_name
+ [ -z "$hostname" ] && hostname=arpa.in-addr.$new_ip_address
+ OLDIFS="$IFS"
+ IFS=.
+ unset revname
+ for i in $hostname; do
+ revname=${i}${revname+.$revname}
+ done
+ IFS="$OLDIFS"
+ iscsi_initiator=iqn.2009-01.$revname
+ fi
+
+ echo "InitiatorName='$iscsi_initiator'" > /dev/.initiatorname.iscsi
+
+ # FIXME $iscsi_lun?? $iscsi_protocol??
+
+ iscsistart -i $iscsi_initiator -t $iscsi_target_name \
+ -g $iscsi_target_group -a $iscsi_target_ip \
+ -p $iscsi_target_port \
+ ${iscsi_username+-u $iscsi_username} \
+ ${iscsi_password+-w $iscsi_password} \
+ ${iscsi_in_username+-U $iscsi_in_username} \
+ ${iscsi_in_password+-W $iscsi_in_password}
+ # now we have a root filesystem somewhere in /dev/sda*
+ # let the normal block handler handle root=
+fi
+
+exit 0
--- /dev/null
+# XXX actually we could, if we move to root=XXX and netroot=XXX, then
+# you could do root=LABEL=/ iscsiroot=XXX, or netroot=iscsi:XXX
+#
+#
+# Preferred format:
+# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+#
+# Legacy formats:
+# iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# root=dhcp iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# root=iscsi iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# root=??? iscsi_initiator= iscsi_target_name= iscsi_target_ip= iscsi_target_port= iscsi_target_group= iscsi_username= iscsi_password= iscsi_in_username= iscsi_in_password=
+# root=??? iscsi_firmware
+
+exec >/dev/console
+exec 2>/dev/console
+
+set -x
+
+case "$root" in
+ iscsi|dhcp|'')
+ if getarg iscsiroot= > /dev/null; then
+ root=iscsi:$(getarg iscsiroot=)
+ fi
+ ;;
+esac
+
+if [ "${root%%:*}" = "iscsi" ]; then
+ # XXX validate options here?
+ # XXX generate udev rules?
+ rootok=1
+ netroot=iscsi
+fi
+
+if getarg iscsiroot; then
+ netroot=iscsi
+fi
--- /dev/null
+all:
+ make -C ../.. all
+ @basedir=../.. testdir=../ ./test.sh --all
+setup:
+ make -C ../.. all
+ @basedir=../.. testdir=../ ./test.sh --setup
+clean:
+ @basedir=../.. testdir=../ ./test.sh --clean
+run:
+ @basedir=../.. testdir=../ ./test.sh --run
--- /dev/null
+#!/bin/sh
+# don't let udev and this script step on eachother's toes
+for x in 63-luks.rules 64-lvm.rules 70-mdadm.rules 99-mount-rules; do
+ > "/etc/udev/rules.d/$x"
+done
+udevadm control --reload-rules
+# save a partition at the beginning for future flagging purposes
+sfdisk -C 640 -H 2 -S 32 -L /dev/sda <<EOF
+,1
+,213
+,213
+,213
+EOF
+mdadm --create /dev/md0 --run --auto=yes --level=5 --raid-devices=3 /dev/sda2 /dev/sda3 /dev/sda4
+# wait for the array to finish initailizing, otherwise this sometimes fails
+# randomly.
+mdadm -W /dev/md0
+echo -n test >keyfile
+cryptsetup -q luksFormat /dev/md0 /keyfile
+echo "The passphrase is test"
+cryptsetup luksOpen /dev/md0 dracut_crypt_test </keyfile && \
+lvm pvcreate -ff -y /dev/mapper/dracut_crypt_test && \
+lvm vgcreate dracut /dev/mapper/dracut_crypt_test && \
+lvm lvcreate -l 100%FREE -n root dracut && \
+lvm vgchange -ay && \
+mke2fs /dev/dracut/root && \
+mkdir -p /sysroot && \
+mount /dev/dracut/root /sysroot && \
+cp -a -t /sysroot /source/* && \
+umount /sysroot && \
+lvm lvchange -a n /dev/dracut/root && \
+cryptsetup luksClose /dev/mapper/dracut_crypt_test && \
+echo "dracut-root-block-created" >/dev/sda1
+poweroff -f
--- /dev/null
+#!/bin/sh
+
+[ -b /dev/mapper/$2 ] && exit 0
+echo -n test >/keyfile
+/sbin/cryptsetup luksOpen $1 $2 </keyfile
+
--- /dev/null
+#!/bin/sh
+poweroff -f
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+TEST_DESCRIPTION="root filesystem on an encrypted LVM PV over ISCSI"
+
+test_run() {
+ $testdir/run-qemu -m 512M -nographic -net nic,vlan=0,macaddr=52:54:00:12:34:FE -net tap,vlan=0,ifname=vnet2 \
+ -kernel /boot/vmlinuz-$(uname -r) \
+ -append "root=/dev/dracut/root rw quiet console=ttyS0,115200n81 iscsiroot=192.168.2.2::::iqn.2004-04.com.qnap:TS-439:iSCSI.test.8CCAFA ip=dhcp" \
+ -initrd initramfs.testing
+ #grep -m 1 -q dracut-root-block-success root.ext2 || return 1
+}
+
+test_setup() {
+
+ kernel=$(uname -r)
+ # Create what will eventually be our root filesystem onto an overlay
+ (
+ initdir=overlay/source
+ . $basedir/dracut-functions
+ dracut_install sh df free ls shutdown poweroff stty cat ps ln ip route \
+ /lib/terminfo/l/linux mount dmesg ifconfig dhclient mkdir cp ping dhclient
+ inst "$basedir/modules.d/40network/dhclient-script" "/sbin/dhclient-script"
+ inst "$basedir/modules.d/40network/ifup" "/sbin/ifup"
+ dracut_install grep
+ inst $testdir/test-init /sbin/init
+ find_binary plymouth >/dev/null && dracut_install plymouth
+ (cd "$initdir"; mkdir -p dev sys proc etc var/run tmp )
+ )
+
+ # second, install the files needed to make the root filesystem
+ (
+ initdir=overlay
+ . $basedir/dracut-functions
+ dracut_install sfdisk mke2fs poweroff cp umount
+ inst_simple ./create-root.sh /pre-mount/01create-root.sh
+ )
+
+ # create an initramfs that will create the target root filesystem.
+ # We do it this way so that we do not risk trashing the host mdraid
+ # devices, volume groups, encrypted partitions, etc.
+ $basedir/dracut -l --verbose -i overlay / \
+ -m "dash crypt lvm mdraid udev-rules base rootfs-block iscsi network" \
+ -d "ata_piix ext2 sd_mod" \
+ -f initramfs.makeroot || return 1
+ rm -rf overlay
+ # Invoke KVM and/or QEMU to actually create the target filesystem.
+ $testdir/run-qemu -m 512M -nographic -net nic,vlan=0,macaddr=52:54:00:12:34:FE -net tap,vlan=0,ifname=vnet2 \
+ -kernel "/boot/vmlinuz-$kernel" \
+ -append "root=/dev/dracut/root iscsiroot=192.168.2.2::::iqn.2004-04.com.qnap:TS-439:iSCSI.test.8CCAFA ip=dhcp rw rootfstype=ext2 console=ttyS0,115200n81 quiet" \
+ -initrd initramfs.makeroot || return 1
+
+ (
+ initdir=overlay
+ . $basedir/dracut-functions
+ dracut_install poweroff shutdown
+ inst ./cryptroot-ask /sbin/cryptroot-ask
+ )
+ sudo $basedir/dracut -l -i overlay / \
+ -m "dash crypt lvm mdraid udev-rules base rootfs-block iscsi" \
+ -d "ata_piix ext2 sd_mod" \
+ -f initramfs.testing || return 1
+}
+
+test_cleanup() {
+ rm -fr overlay mnt
+ rm -f root.ext2 initramfs.makeroot initramfs.testing
+}
+
+. $testdir/test-functions