* frame.c (get_saved_register): Delete function.
* xstormy16-tdep.c: Update comment.
* regcache.h: Update comments.
* sparc-tdep.c (sparc_init_extra_frame_info): Instead of
get_saved_register and extract_address, use
frame_read_unsigned_register.
(sparc_frame_saved_pc): Ditto.
(sparc_get_saved_register): Instead of get_saved_register, use
frame_register.
(sparc_pop_frame): Ditto.
* frame.h (get_saved_register): Delete declaration.
* findvar.c: Update comments.
(value_of_register): Call frame_register instead of
get_saved_register.
(value_from_register): Ditto.
* config/sparc/tm-sparc.h: Update comment.
* breakpoint.c: Update comment.
Index: doc/ChangeLog
2003-03-12 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Delete
references to get_saved_register.
2003-03-14 Andrew Cagney <cagney@redhat.com>
+ * frame.c (get_saved_register): Delete function.
+ * frame.h (get_saved_register): Delete declaration.
+ * xstormy16-tdep.c: Update comment.
+ * regcache.h: Update comments.
+ * sparc-tdep.c (sparc_init_extra_frame_info): Instead of
+ get_saved_register and extract_address, use
+ frame_read_unsigned_register.
+ (sparc_frame_saved_pc): Ditto.
+ (sparc_get_saved_register): Instead of get_saved_register, use
+ frame_register.
+ (sparc_pop_frame): Ditto.
+ * findvar.c: Update comments.
+ (value_of_register): Call frame_register instead of
+ get_saved_register.
+ (value_from_register): Ditto.
+ * config/sparc/tm-sparc.h: Update comment.
+ * breakpoint.c: Update comment.
+
+2003-03-14 Andrew Cagney <cagney@redhat.com>
+
* gdbarch.sh (DEPRECATED_GET_SAVED_REGISTER): Replace
GET_SAVED_REGISTER.
* gdbarch.h, gdbarch.c: Re-generate.
/* Return nonzero if FRAME is a dummy frame. We can't use
DEPRECATED_PC_IN_CALL_DUMMY because figuring out the saved SP would
- take too much time, at least using get_saved_register on the 68k.
+ take too much time, at least using frame_register() on the 68k.
This means that for this function to work right a port must use the
bp_call_dummy breakpoint. */
stack rather than with the other registers, and this causes hair
and confusion in places like pop_frame. It might be better to
remove the ins and locals from `registers', make sure that
- get_saved_register can get them from the stack (even in the
- innermost frame), and make this the way to access them. For the
- frame pointer we would do that via TARGET_READ_FP. On the other
- hand, that is likely to be confusing or worse for flat frames. */
+ frame_register() can get them from the stack (even in the innermost
+ frame), and make this the way to access them. For the frame
+ pointer we would do that via TARGET_READ_FP. On the other hand,
+ that is likely to be confusing or worse for flat frames. */
#define REGISTER_BYTES (32*4+32*4+8*4)
+2003-03-12 Andrew Cagney <cagney@redhat.com>
+
+ * gdbint.texinfo (Target Architecture Definition): Delete
+ references to get_saved_register. Rename GET_SAVED_REGISTER to
+ DEPRECATED_GET_SAVED_REGISTER.
+
2003-03-13 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Replace
@code{CORE_ADDR *} as argument, and stores the target PC value through this
pointer. It examines the current state of the machine as needed.
-@item GET_SAVED_REGISTER
-@findex GET_SAVED_REGISTER
-@findex get_saved_register
+@item DEPRECATED_GET_SAVED_REGISTER
+@findex DEPRECATED_GET_SAVED_REGISTER
Define this if you need to supply your own definition for the function
-@code{get_saved_register}.
+@code{DEPRECATED_GET_SAVED_REGISTER}.
@item IBM6000_TARGET
@findex IBM6000_TARGET
CORE_ADDR addr;
int optim;
struct value *reg_val;
+ int realnum;
char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
enum lval_type lval;
if (regnum >= NUM_REGS + NUM_PSEUDO_REGS)
return value_of_builtin_reg (regnum, frame);
- get_saved_register (raw_buffer, &optim, &addr,
- frame, regnum, &lval);
+ frame_register (frame, regnum, &optim, &lval, &addr, &realnum, raw_buffer);
/* FIXME: cagney/2002-05-15: This test is just bogus.
(value_bytes_copied += REGISTER_RAW_SIZE (local_regnum),
++local_regnum))
{
- get_saved_register (value_bytes + value_bytes_copied,
- &optim,
- &addr,
- frame,
- local_regnum,
- &lval);
+ int realnum;
+ frame_register (frame, local_regnum, &optim, &lval, &addr,
+ &realnum, value_bytes + value_bytes_copied);
if (register_cached (local_regnum) == -1)
return NULL; /* register value not available */
register's contents in a real register or in core;
read the data in raw format. */
- get_saved_register (raw_buffer, &optim, &addr, frame, regnum, &lval);
+ {
+ int realnum;
+ frame_register (frame, regnum, &optim, &lval, &addr, &realnum, raw_buffer);
+ }
if (register_cached (regnum) == -1)
return NULL; /* register value not available */
&realnumx, raw_buffer);
}
-void
-get_saved_register (char *raw_buffer,
- int *optimized,
- CORE_ADDR *addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lval)
-{
- if (DEPRECATED_GET_SAVED_REGISTER_P ())
- {
- DEPRECATED_GET_SAVED_REGISTER (raw_buffer, optimized, addrp, frame,
- regnum, lval);
- return;
- }
- generic_unwind_get_saved_register (raw_buffer, optimized, addrp, frame,
- regnum, lval);
-}
-
/* frame_register_read ()
Find and return the value of REGNUM for the specified stack frame.
const struct frame_unwind *trad_frame_unwind = &trad_frame_unwinder;
-/* Function: get_saved_register
+/* Function: deprecated_generic_get_saved_register
+
Find register number REGNUM relative to FRAME and put its (raw,
- target format) contents in *RAW_BUFFER.
+ target format) contents in *RAW_BUFFER.
Set *OPTIMIZED if the variable was optimized out (and thus can't be
fetched). Note that this is never set to anything other than zero
offset into the registers array. If the value is stored in a dummy
frame, set *ADDRP to zero.
- To use this implementation, define a function called
- "get_saved_register" in your target code, which simply passes all
- of its arguments to this function.
-
The argument RAW_BUFFER must point to aligned memory. */
void
/* NOTE: cagney/2002-06-26: Targets should no longer use this
function. Instead, the contents of a dummy frames registers can be
obtained by applying: frame_register_unwind to the dummy frame; or
- get_saved_register to the next outer frame. */
+ frame_register_unwind() to the next outer frame. */
extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
-extern void get_saved_register (char *raw_buffer, int *optimized,
- CORE_ADDR * addrp,
- struct frame_info *frame,
- int regnum, enum lval_type *lval);
-
/* FIXME: cagney/2003-02-02: Should be deprecated or replaced with a
function called frame_read_register_p(). This slightly weird (and
older) variant of frame_read_register() returns zero (indicating
+2003-03-12 Andrew Cagney <cagney@redhat.com>
+
+ * mi-main.c (get_register): Use frame_register instead of
+ get_saved_register.
+
2003-03-08 Andrew Cagney <cagney@redhat.com>
* mi-out.c: Update copyright.
char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
char *virtual_buffer = alloca (MAX_REGISTER_VIRTUAL_SIZE);
int optim;
+ int realnum;
+ CORE_ADDR addr;
+ enum lval_type lval;
static struct ui_stream *stb = NULL;
stb = ui_out_stream_new (uiout);
if (format == 'N')
format = 0;
- get_saved_register (raw_buffer, &optim, (CORE_ADDR *) NULL,
- deprecated_selected_frame,
- regnum, (enum lval_type *) NULL);
+ frame_register (deprecated_selected_frame, regnum, &optim, &lval, &addr,
+ &realnum, raw_buffer);
+
if (optim)
{
xasprintf (&mi_error_message, "Optimized out");
/* The register's ``offset''.
- FIXME: cagney/2002-11-07: The get_saved_register() function, when
+ FIXME: cagney/2002-11-07: The frame_register() function, when
specifying the real location of a register, does so using that
registers offset in the register cache. That offset is then used
by valops.c to determine the location of the register. The code
else
{
/* Should we adjust for stack bias here? */
- get_saved_register (buf, 0, 0, fi, FP_REGNUM, 0);
- deprecated_update_frame_base_hack (fi, extract_address (buf, REGISTER_RAW_SIZE (FP_REGNUM)));
-
+ ULONGEST tmp;
+ frame_read_unsigned_register (fi, FP_REGNUM, &tmp);
+ deprecated_update_frame_base_hack (fi, tmp);
if (GDB_TARGET_IS_SPARC64 && (get_frame_base (fi) & 1))
deprecated_update_frame_base_hack (fi, get_frame_base (fi) + 2047);
}
get_frame_extra_info (fi)->sp_offset = offset;
/* Overwrite the frame's address with the value in %i7. */
- get_saved_register (buf, 0, 0, fi, I7_REGNUM, 0);
- deprecated_update_frame_base_hack (fi, extract_address (buf, REGISTER_RAW_SIZE (I7_REGNUM)));
+ {
+ ULONGEST tmp;
+ frame_read_unsigned_register (fi, I7_REGNUM, &tmp);
+ deprecated_update_frame_base_hack (fi, tmp);
+ }
if (GDB_TARGET_IS_SPARC64 && (get_frame_base (fi) & 1))
deprecated_update_frame_base_hack (fi, get_frame_base (fi) + 2047);
saved_pc_offset = 12;
/* The sigcontext address is contained in register O2. */
- get_saved_register (buf, (int *) NULL, (CORE_ADDR *) NULL,
- frame, O0_REGNUM + 2, (enum lval_type *) NULL);
- sigcontext_addr = extract_address (buf, REGISTER_RAW_SIZE (O0_REGNUM + 2));
+ {
+ ULONGEST tmp;
+ frame_read_unsigned_register (frame, O0_REGNUM + 2, &tmp);
+ sigcontext_addr = tmp;
+ }
/* Don't cause a memory_error when accessing sigcontext in case the
stack layout has changed or the stack is corrupt. */
{
/* A frameless function interrupted by a signal did not save
the PC, it is still in %o7. */
- get_saved_register (buf, (int *) NULL, (CORE_ADDR *) NULL,
- frame, O7_REGNUM, (enum lval_type *) NULL);
- return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
+ ULONGEST tmp;
+ frame_read_unsigned_register (frame, O7_REGNUM, &tmp);
+ return PC_ADJUST (tmp);
}
if (get_frame_extra_info (frame)->flat)
addr = get_frame_extra_info (frame)->pc_addr;
else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
{
/* Outs become ins. */
- get_saved_register (raw_buffer, optimized, addrp, frame1,
- (regnum - O0_REGNUM + I0_REGNUM), lval);
+ int realnum;
+ frame_register (frame1, (regnum - O0_REGNUM + I0_REGNUM),
+ optimized, lval, addrp, &realnum, raw_buffer);
return;
}
}
I think few ports of GDB get right--if you are popping a frame
which does not save some register that *is* saved by a more inner
frame (such a frame will never be a dummy frame because dummy
- frames save all registers). Rewriting pop_frame to use
- get_saved_register would solve this problem and also get rid of the
- ugly duplication between sparc_frame_find_saved_regs and
- get_saved_register.
+ frames save all registers).
+
+ NOTE: cagney/2003-03-12: Since pop_frame has been rewritten to use
+ frame_unwind_register() the need for this function is questionable.
Stores, into an array of CORE_ADDR,
the addresses of the saved registers of frame described by FRAME_INFO.
/* I think this happens only in the innermost frame, if so then
it is a complicated way of saying
"pc = read_register (O7_REGNUM);". */
- char *buf;
-
- buf = alloca (MAX_REGISTER_RAW_SIZE);
- get_saved_register (buf, 0, 0, frame, O7_REGNUM, 0);
- pc = PC_ADJUST (extract_address
- (buf, REGISTER_RAW_SIZE (O7_REGNUM)));
+ ULONGEST tmp;
+ frame_read_unsigned_register (frame, O7_REGNUM, &tmp);
+ pc = PC_ADJUST (tmp);
}
write_register (PC_REGNUM, pc);
+2003-03-14 Andrew Cagney <cagney@redhat.com>
+
+ * tuiRegs.c (_tuiGetRegisterRawValue): Use frame_read_register,
+ instead of get_saved_register.
+
2003-03-13 Stephane Carrez <stcarrez@nerim.fr>
* tui-out.c (tui_out_data): Fix typedef.
if (target_has_registers)
{
- int opt;
-
- get_saved_register (regValue, &opt, (CORE_ADDR*) NULL, frame,
- regNum, (enum lval_type*) NULL);
+ frame_read_register (frame, regNum, regValue);
+ /* NOTE: cagney/2003-03-13: This is bogus. It is refering to
+ the register cache and not the frame which could have pulled
+ the register value off the stack. */
if (register_cached (regNum) >= 0)
ret = TUI_SUCCESS;
}
actual value of the previous frame's stack register.
This function may be called in any context where the saved register
- values may be needed (backtrace, frame_info, get_saved_register).
- On many targets, it is called directly by init_extra_frame_info,
- in part because the information may be needed immediately by
- frame_chain.
-*/
+ values may be needed (backtrace, frame_info, frame_register). On
+ many targets, it is called directly by init_extra_frame_info, in
+ part because the information may be needed immediately by
+ frame_chain. */
static void
xstormy16_frame_init_saved_regs (struct frame_info *fi)
get_frame_base (thisframe) - get_frame_extra_info (thisframe)->framesize == chain);
}
-/* Function: xstormy16_saved_pc_after_call
- Returns the previous PC immediately after a function call.
- This function is meant to bypass the regular get_saved_register
- mechanism, ie. it is meant to work even if the frame isn't complete.
- Called by step_over_function, and sometimes by get_prev_frame.
-*/
+/* Function: xstormy16_saved_pc_after_call Returns the previous PC
+ immediately after a function call. This function is meant to
+ bypass the regular frame_register() mechanism, ie. it is meant to
+ work even if the frame isn't complete. Called by
+ step_over_function, and sometimes by get_prev_frame. */
static CORE_ADDR
xstormy16_saved_pc_after_call (struct frame_info *ignore)
projects / external / binutils.git / commitdiff