staging: wilc1000: sdio/spi: use device print api instead of custom one
authorGlen Lee <glen.lee@atmel.com>
Mon, 21 Dec 2015 05:18:13 +0000 (14:18 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 21 Dec 2015 21:20:04 +0000 (13:20 -0800)
This patch use device print api instead of driver defined print. Remove
varialbe dPrint as well. String "[wilc sdio]" and "[wilc spi]" are also removed
from all the print statment if exist because it shows which device the message
is related to.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/wilc1000/linux_wlan_sdio.c
drivers/staging/wilc1000/linux_wlan_spi.c
drivers/staging/wilc1000/wilc_sdio.c
drivers/staging/wilc1000/wilc_spi.c

index ae31f7d..66cdca2 100644 (file)
@@ -52,7 +52,7 @@ int wilc_sdio_cmd52(struct wilc *wilc, sdio_cmd52_t *cmd)
        sdio_release_host(func);
 
        if (ret < 0) {
-               PRINT_ER("wilc_sdio_cmd52..failed, err(%d)\n", ret);
+               dev_err(&func->dev, "wilc_sdio_cmd52..failed, err(%d)\n", ret);
                return 0;
        }
        return 1;
@@ -83,7 +83,7 @@ int wilc_sdio_cmd53(struct wilc *wilc, sdio_cmd53_t *cmd)
 
 
        if (ret < 0) {
-               PRINT_ER("wilc_sdio_cmd53..failed, err(%d)\n", ret);
+               dev_err(&func->dev, "wilc_sdio_cmd53..failed, err(%d)\n", ret);
                return 0;
        }
 
@@ -102,16 +102,16 @@ static int linux_sdio_probe(struct sdio_func *func, const struct sdio_device_id
                        gpio = GPIO_NUM;
        }
 
-       PRINT_D(INIT_DBG, "Initializing netdev\n");
+       dev_dbg(&func->dev, "Initializing netdev\n");
        if (wilc_netdev_init(&wilc, &func->dev, HIF_SDIO, gpio,
                             &wilc_hif_sdio)) {
-               PRINT_ER("Couldn't initialize netdev\n");
+               dev_err(&func->dev, "Couldn't initialize netdev\n");
                return -1;
        }
        sdio_set_drvdata(func, wilc);
        wilc->dev = &func->dev;
 
-       printk("Driver Initializing success\n");
+       dev_info(&func->dev, "Driver Initializing success\n");
        return 0;
 }
 
@@ -139,7 +139,7 @@ int wilc_sdio_enable_interrupt(struct wilc *dev)
        sdio_release_host(func);
 
        if (ret < 0) {
-               PRINT_ER("can't claim sdio_irq, err(%d)\n", ret);
+               dev_err(&func->dev, "can't claim sdio_irq, err(%d)\n", ret);
                ret = -EIO;
        }
        return ret;
@@ -150,16 +150,16 @@ void wilc_sdio_disable_interrupt(struct wilc *dev)
        struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev);
        int ret;
 
-       PRINT_D(INIT_DBG, "wilc_sdio_disable_interrupt IN\n");
+       dev_dbg(&func->dev, "wilc_sdio_disable_interrupt IN\n");
 
        sdio_claim_host(func);
        ret = sdio_release_irq(func);
        if (ret < 0) {
-               PRINT_ER("can't release sdio_irq, err(%d)\n", ret);
+               dev_err(&func->dev, "can't release sdio_irq, err(%d)\n", ret);
        }
        sdio_release_host(func);
 
-       PRINT_D(INIT_DBG, "wilc_sdio_disable_interrupt OUT\n");
+       dev_info(&func->dev, "wilc_sdio_disable_interrupt OUT\n");
 }
 
 int wilc_sdio_init(void)
index f3ffc9e..01fa6fa 100644 (file)
@@ -83,7 +83,7 @@ int wilc_spi_write(struct wilc *wilc, u8 *b, u32 len)
                        return -ENOMEM;
 
                tr.rx_buf = r_buffer;
-               PRINT_D(BUS_DBG, "Request writing %d bytes\n", len);
+               dev_dbg(&spi->dev, "Request writing %d bytes\n", len);
 
                memset(&msg, 0, sizeof(msg));
                spi_message_init(&msg);
@@ -95,13 +95,17 @@ int wilc_spi_write(struct wilc *wilc, u8 *b, u32 len)
 
                ret = spi_sync(spi, &msg);
                if (ret < 0) {
-                       PRINT_ER("SPI transaction failed\n");
+                       dev_err(&spi->dev, "SPI transaction failed\n");
                }
 
                kfree(r_buffer);
        } else {
-               PRINT_ER("can't write data with the following length: %d\n", len);
-               PRINT_ER("FAILED due to NULL buffer or ZERO length check the following length: %d\n", len);
+               dev_err(&spi->dev,
+                       "can't write data with the following length: %d\n",
+                       len);
+               dev_err(&spi->dev,
+                       "FAILED due to NULL buffer or ZERO length check the following length: %d\n",
+                       len);
                ret = -1;
        }
 
@@ -141,11 +145,13 @@ int wilc_spi_read(struct wilc *wilc, u8 *rb, u32 rlen)
 
                ret = spi_sync(spi, &msg);
                if (ret < 0) {
-                       PRINT_ER("SPI transaction failed\n");
+                       dev_err(&spi->dev, "SPI transaction failed\n");
                }
                kfree(t_buffer);
        } else {
-               PRINT_ER("can't read data with the following length: %u\n", rlen);
+               dev_err(&spi->dev,
+                       "can't read data with the following length: %u\n",
+                       rlen);
                ret = -1;
        }
        /* change return value to match WILC interface */
@@ -178,10 +184,12 @@ int wilc_spi_write_read(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
                spi_message_add_tail(&tr, &msg);
                ret = spi_sync(spi, &msg);
                if (ret < 0) {
-                       PRINT_ER("SPI transaction failed\n");
+                       dev_err(&spi->dev, "SPI transaction failed\n");
                }
        } else {
-               PRINT_ER("can't read data with the following length: %u\n", rlen);
+               dev_err(&spi->dev,
+                       "can't read data with the following length: %u\n",
+                       rlen);
                ret = -1;
        }
        /* change return value to match WILC interface */
index a9ad49f..dfa3d3a 100644 (file)
@@ -18,7 +18,6 @@
 typedef struct {
        bool irq_gpio;
        u32 block_size;
-       wilc_debug_func dPrint;
        int nint;
 #define MAX_NUN_INT_THRPT_ENH2 (5) /* Max num interrupts allowed in registers 0xf7, 0xf8 */
        int has_thrpt_enh3;
@@ -37,6 +36,7 @@ static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data);
 
 static int sdio_set_func0_csa_address(struct wilc *wilc, u32 adr)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        sdio_cmd52_t cmd;
 
        /**
@@ -48,21 +48,21 @@ static int sdio_set_func0_csa_address(struct wilc *wilc, u32 adr)
        cmd.address = 0x10c;
        cmd.data = (u8)adr;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x10c data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x10c data...\n");
                goto _fail_;
        }
 
        cmd.address = 0x10d;
        cmd.data = (u8)(adr >> 8);
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x10d data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x10d data...\n");
                goto _fail_;
        }
 
        cmd.address = 0x10e;
        cmd.data = (u8)(adr >> 16);
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x10e data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x10e data...\n");
                goto _fail_;
        }
 
@@ -73,6 +73,7 @@ _fail_:
 
 static int sdio_set_func0_block_size(struct wilc *wilc, u32 block_size)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        sdio_cmd52_t cmd;
 
        cmd.read_write = 1;
@@ -81,14 +82,14 @@ static int sdio_set_func0_block_size(struct wilc *wilc, u32 block_size)
        cmd.address = 0x10;
        cmd.data = (u8)block_size;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x10 data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x10 data...\n");
                goto _fail_;
        }
 
        cmd.address = 0x11;
        cmd.data = (u8)(block_size >> 8);
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x11 data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x11 data...\n");
                goto _fail_;
        }
 
@@ -105,6 +106,7 @@ _fail_:
 
 static int sdio_set_func1_block_size(struct wilc *wilc, u32 block_size)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        sdio_cmd52_t cmd;
 
        cmd.read_write = 1;
@@ -113,13 +115,13 @@ static int sdio_set_func1_block_size(struct wilc *wilc, u32 block_size)
        cmd.address = 0x110;
        cmd.data = (u8)block_size;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x110 data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x110 data...\n");
                goto _fail_;
        }
        cmd.address = 0x111;
        cmd.data = (u8)(block_size >> 8);
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0x111 data...\n");
+               dev_err(&func->dev, "Failed cmd52, set 0x111 data...\n");
                goto _fail_;
        }
 
@@ -130,6 +132,8 @@ _fail_:
 
 static int sdio_clear_int(struct wilc *wilc)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
+
        if (!g_sdio.irq_gpio) {
                /* u32 sts; */
                sdio_cmd52_t cmd;
@@ -146,7 +150,8 @@ static int sdio_clear_int(struct wilc *wilc)
                u32 reg;
 
                if (!sdio_read_reg(wilc, WILC_HOST_RX_CTRL_0, &reg)) {
-                       g_sdio.dPrint(N_ERR, "[wilc spi]: Failed read reg (%08x)...\n", WILC_HOST_RX_CTRL_0);
+                       dev_err(&func->dev, "Failed read reg (%08x)...\n",
+                               WILC_HOST_RX_CTRL_0);
                        return 0;
                }
                reg &= ~0x1;
@@ -163,6 +168,8 @@ static int sdio_clear_int(struct wilc *wilc)
  ********************************************/
 static int sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
+
        data = cpu_to_le32(data);
 
        if ((addr >= 0xf0) && (addr <= 0xff)) {
@@ -174,7 +181,8 @@ static int sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
                cmd.address = addr;
                cmd.data = data;
                if (!wilc_sdio_cmd52(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd 52, read reg (%08x) ...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd 52, read reg (%08x) ...\n", addr);
                        goto _fail_;
                }
        } else {
@@ -196,7 +204,8 @@ static int sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
                cmd.block_size = g_sdio.block_size; /* johnny : prevent it from setting unexpected value */
 
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53, write reg (%08x)...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53, write reg (%08x)...\n", addr);
                        goto _fail_;
                }
        }
@@ -210,6 +219,7 @@ _fail_:
 
 static int sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        u32 block_size = g_sdio.block_size;
        sdio_cmd53_t cmd;
        int nblk, nleft;
@@ -259,7 +269,8 @@ static int sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
                                goto _fail_;
                }
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block send...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53 [%x], block send...\n", addr);
                        goto _fail_;
                }
                if (addr > 0)
@@ -280,7 +291,8 @@ static int sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
                                goto _fail_;
                }
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], bytes send...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53 [%x], bytes send...\n", addr);
                        goto _fail_;
                }
        }
@@ -294,6 +306,8 @@ _fail_:
 
 static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
+
        if ((addr >= 0xf0) && (addr <= 0xff)) {
                sdio_cmd52_t cmd;
 
@@ -302,7 +316,8 @@ static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
                cmd.raw = 0;
                cmd.address = addr;
                if (!wilc_sdio_cmd52(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd 52, read reg (%08x) ...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd 52, read reg (%08x) ...\n", addr);
                        goto _fail_;
                }
                *data = cmd.data;
@@ -323,7 +338,8 @@ static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
                cmd.block_size = g_sdio.block_size; /* johnny : prevent it from setting unexpected value */
 
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53, read reg (%08x)...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53, read reg (%08x)...\n", addr);
                        goto _fail_;
                }
        }
@@ -339,6 +355,7 @@ _fail_:
 
 static int sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        u32 block_size = g_sdio.block_size;
        sdio_cmd53_t cmd;
        int nblk, nleft;
@@ -388,7 +405,8 @@ static int sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
                                goto _fail_;
                }
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block read...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53 [%x], block read...\n", addr);
                        goto _fail_;
                }
                if (addr > 0)
@@ -409,7 +427,8 @@ static int sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
                                goto _fail_;
                }
                if (!wilc_sdio_cmd53(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], bytes read...\n", addr);
+                       dev_err(&func->dev,
+                               "Failed cmd53 [%x], bytes read...\n", addr);
                        goto _fail_;
                }
        }
@@ -434,19 +453,20 @@ static int sdio_deinit(struct wilc *wilc)
 
 static int sdio_sync(struct wilc *wilc)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        u32 reg;
 
        /**
         *      Disable power sequencer
         **/
        if (!sdio_read_reg(wilc, WILC_MISC, &reg)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed read misc reg...\n");
+               dev_err(&func->dev, "Failed read misc reg...\n");
                return 0;
        }
 
        reg &= ~BIT(8);
        if (!sdio_write_reg(wilc, WILC_MISC, reg)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed write misc reg...\n");
+               dev_err(&func->dev, "Failed write misc reg...\n");
                return 0;
        }
 
@@ -459,13 +479,15 @@ static int sdio_sync(struct wilc *wilc)
                 **/
                ret = sdio_read_reg(wilc, WILC_PIN_MUX_0, &reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc spi]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
+                       dev_err(&func->dev, "Failed read reg (%08x)...\n",
+                               WILC_PIN_MUX_0);
                        return 0;
                }
                reg |= BIT(8);
                ret = sdio_write_reg(wilc, WILC_PIN_MUX_0, reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc spi]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
+                       dev_err(&func->dev, "Failed write reg (%08x)...\n",
+                               WILC_PIN_MUX_0);
                        return 0;
                }
 
@@ -474,13 +496,15 @@ static int sdio_sync(struct wilc *wilc)
                 **/
                ret = sdio_read_reg(wilc, WILC_INTR_ENABLE, &reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
+                       dev_err(&func->dev, "Failed read reg (%08x)...\n",
+                               WILC_INTR_ENABLE);
                        return 0;
                }
                reg |= BIT(16);
                ret = sdio_write_reg(wilc, WILC_INTR_ENABLE, reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
+                       dev_err(&func->dev, "Failed write reg (%08x)...\n",
+                               WILC_INTR_ENABLE);
                        return 0;
                }
        }
@@ -488,19 +512,19 @@ static int sdio_sync(struct wilc *wilc)
        return 1;
 }
 
-static int sdio_init(struct wilc *wilc, wilc_debug_func func)
+static int sdio_init(struct wilc *wilc, wilc_debug_func debug_func)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        sdio_cmd52_t cmd;
        int loop;
        u32 chipid;
 
        memset(&g_sdio, 0, sizeof(wilc_sdio_t));
 
-       g_sdio.dPrint = func;
        g_sdio.irq_gpio = (wilc->dev_irq_num);
 
        if (!wilc_sdio_init()) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed io init bus...\n");
+               dev_err(&func->dev, "Failed io init bus...\n");
                return 0;
        } else {
                return 0;
@@ -515,7 +539,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
        cmd.address = 0x100;
        cmd.data = 0x80;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail cmd 52, enable csa...\n");
+               dev_err(&func->dev, "Fail cmd 52, enable csa...\n");
                goto _fail_;
        }
 
@@ -523,7 +547,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
         *      function 0 block size
         **/
        if (!sdio_set_func0_block_size(wilc, WILC_SDIO_BLOCK_SIZE)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail cmd 52, set func 0 block size...\n");
+               dev_err(&func->dev, "Fail cmd 52, set func 0 block size...\n");
                goto _fail_;
        }
        g_sdio.block_size = WILC_SDIO_BLOCK_SIZE;
@@ -537,7 +561,8 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
        cmd.address = 0x2;
        cmd.data = 0x2;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio] Fail cmd 52, set IOE register...\n");
+               dev_err(&func->dev,
+                       "Fail cmd 52, set IOE register...\n");
                goto _fail_;
        }
 
@@ -552,7 +577,8 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
        do {
                cmd.data = 0;
                if (!wilc_sdio_cmd52(wilc, &cmd)) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail cmd 52, get IOR register...\n");
+                       dev_err(&func->dev,
+                               "Fail cmd 52, get IOR register...\n");
                        goto _fail_;
                }
                if (cmd.data == 0x2)
@@ -560,7 +586,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
        } while (loop--);
 
        if (loop <= 0) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail func 1 is not ready...\n");
+               dev_err(&func->dev, "Fail func 1 is not ready...\n");
                goto _fail_;
        }
 
@@ -568,7 +594,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
         *      func 1 is ready, set func 1 block size
         **/
        if (!sdio_set_func1_block_size(wilc, WILC_SDIO_BLOCK_SIZE)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail set func 1 block size...\n");
+               dev_err(&func->dev, "Fail set func 1 block size...\n");
                goto _fail_;
        }
 
@@ -581,7 +607,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
        cmd.address = 0x4;
        cmd.data = 0x3;
        if (!wilc_sdio_cmd52(wilc, &cmd)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail cmd 52, set IEN register...\n");
+               dev_err(&func->dev, "Fail cmd 52, set IEN register...\n");
                goto _fail_;
        }
 
@@ -589,15 +615,15 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
         *      make sure can read back chip id correctly
         **/
        if (!sdio_read_reg(wilc, 0x1000, &chipid)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Fail cmd read chip id...\n");
+               dev_err(&func->dev, "Fail cmd read chip id...\n");
                goto _fail_;
        }
-       g_sdio.dPrint(N_ERR, "[wilc sdio]: chipid (%08x)\n", chipid);
+       dev_err(&func->dev, "chipid (%08x)\n", chipid);
        if ((chipid & 0xfff) > 0x2a0)
                g_sdio.has_thrpt_enh3 = 1;
        else
                g_sdio.has_thrpt_enh3 = 0;
-       g_sdio.dPrint(N_ERR, "[wilc sdio]: has_thrpt_enh3 = %d...\n", g_sdio.has_thrpt_enh3);
+       dev_info(&func->dev, "has_thrpt_enh3 = %d...\n", g_sdio.has_thrpt_enh3);
 
        return 1;
 
@@ -637,7 +663,7 @@ static int sdio_read_size(struct wilc *wilc, u32 *size)
 
 static int sdio_read_int(struct wilc *wilc, u32 *int_status)
 {
-
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        u32 tmp;
        sdio_cmd52_t cmd;
 
@@ -668,7 +694,9 @@ static int sdio_read_int(struct wilc *wilc, u32 *int_status)
                        tmp |= INT_5;
                for (i = g_sdio.nint; i < MAX_NUM_INT; i++) {
                        if ((tmp >> (IRG_FLAGS_OFFSET + i)) & 0x1) {
-                               g_sdio.dPrint(N_ERR, "[wilc sdio]: Unexpected interrupt (1) : tmp=%x, data=%x\n", tmp, cmd.data);
+                               dev_err(&func->dev,
+                                       "Unexpected interrupt (1) : tmp=%x, data=%x\n",
+                                       tmp, cmd.data);
                                break;
                        }
                }
@@ -692,6 +720,7 @@ static int sdio_read_int(struct wilc *wilc, u32 *int_status)
 
 static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        int ret;
 
        if (g_sdio.has_thrpt_enh3) {
@@ -725,7 +754,9 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
 
                        ret = wilc_sdio_cmd52(wilc, &cmd);
                        if (!ret) {
-                               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0xf8 data (%d) ...\n", __LINE__);
+                               dev_err(&func->dev,
+                                       "Failed cmd52, set 0xf8 data (%d) ...\n",
+                                       __LINE__);
                                goto _fail_;
                        }
 
@@ -753,7 +784,9 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
 
                                                ret = wilc_sdio_cmd52(wilc, &cmd);
                                                if (!ret) {
-                                                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0xf8 data (%d) ...\n", __LINE__);
+                                                       dev_err(&func->dev,
+                                                               "Failed cmd52, set 0xf8 data (%d) ...\n",
+                                                               __LINE__);
                                                        goto _fail_;
                                                }
 
@@ -766,7 +799,9 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
                                        goto _fail_;
                                for (i = g_sdio.nint; i < MAX_NUM_INT; i++) {
                                        if (flags & 1)
-                                               g_sdio.dPrint(N_ERR, "[wilc sdio]: Unexpected interrupt cleared %d...\n", i);
+                                               dev_err(&func->dev,
+                                                       "Unexpected interrupt cleared %d...\n",
+                                                       i);
                                        flags >>= 1;
                                }
                        }
@@ -796,7 +831,9 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
                                cmd.data = vmm_ctl;
                                ret = wilc_sdio_cmd52(wilc, &cmd);
                                if (!ret) {
-                                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd52, set 0xf6 data (%d) ...\n", __LINE__);
+                                       dev_err(&func->dev,
+                                               "Failed cmd52, set 0xf6 data (%d) ...\n",
+                                               __LINE__);
                                        goto _fail_;
                                }
                        }
@@ -810,14 +847,16 @@ _fail_:
 
 static int sdio_sync_ext(struct wilc *wilc, int nint)
 {
+       struct sdio_func *func = dev_to_sdio_func(wilc->dev);
        u32 reg;
 
        if (nint > MAX_NUM_INT) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Too many interupts (%d)...\n", nint);
+               dev_err(&func->dev, "Too many interupts (%d)...\n", nint);
                return 0;
        }
        if (nint > MAX_NUN_INT_THRPT_ENH2) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Error: Cannot support more than 5 interrupts when has_thrpt_enh2=1.\n");
+               dev_err(&func->dev,
+                       "Cannot support more than 5 interrupts when has_thrpt_enh2=1.\n");
                return 0;
        }
 
@@ -827,13 +866,13 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
         *      Disable power sequencer
         **/
        if (!sdio_read_reg(wilc, WILC_MISC, &reg)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed read misc reg...\n");
+               dev_err(&func->dev, "Failed read misc reg...\n");
                return 0;
        }
 
        reg &= ~BIT(8);
        if (!sdio_write_reg(wilc, WILC_MISC, reg)) {
-               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed write misc reg...\n");
+               dev_err(&func->dev, "Failed write misc reg...\n");
                return 0;
        }
 
@@ -846,13 +885,15 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
                 **/
                ret = sdio_read_reg(wilc, WILC_PIN_MUX_0, &reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
+                       dev_err(&func->dev, "Failed read reg (%08x)...\n",
+                               WILC_PIN_MUX_0);
                        return 0;
                }
                reg |= BIT(8);
                ret = sdio_write_reg(wilc, WILC_PIN_MUX_0, reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
+                       dev_err(&func->dev, "Failed write reg (%08x)...\n",
+                               WILC_PIN_MUX_0);
                        return 0;
                }
 
@@ -861,7 +902,8 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
                 **/
                ret = sdio_read_reg(wilc, WILC_INTR_ENABLE, &reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
+                       dev_err(&func->dev, "Failed read reg (%08x)...\n",
+                               WILC_INTR_ENABLE);
                        return 0;
                }
 
@@ -869,13 +911,16 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
                        reg |= BIT((27 + i));
                ret = sdio_write_reg(wilc, WILC_INTR_ENABLE, reg);
                if (!ret) {
-                       g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
+                       dev_err(&func->dev, "Failed write reg (%08x)...\n",
+                               WILC_INTR_ENABLE);
                        return 0;
                }
                if (nint) {
                        ret = sdio_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
                        if (!ret) {
-                               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed read reg (%08x)...\n", WILC_INTR2_ENABLE);
+                               dev_err(&func->dev,
+                                       "Failed read reg (%08x)...\n",
+                                       WILC_INTR2_ENABLE);
                                return 0;
                        }
 
@@ -884,7 +929,9 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
 
                        ret = sdio_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
                        if (!ret) {
-                               g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed write reg (%08x)...\n", WILC_INTR2_ENABLE);
+                               dev_err(&func->dev,
+                                       "Failed write reg (%08x)...\n",
+                                       WILC_INTR2_ENABLE);
                                return 0;
                        }
                }
index c94d86f..8060125 100644 (file)
@@ -14,7 +14,6 @@
 #include "wilc_wfi_netdevice.h"
 
 typedef struct {
-       wilc_debug_func dPrint;
        int crc_off;
        int nint;
        int has_thrpt_enh;
@@ -111,6 +110,7 @@ static u8 crc7(u8 crc, const u8 *buffer, u32 len)
 static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                            u8 clockless)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u8 wb[32], rb[32];
        u8 wix, rix;
        u32 len2;
@@ -239,7 +239,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 #undef NUM_DUMMY_BYTES
 
        if (len2 > ARRAY_SIZE(wb)) {
-               PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%zu)\n",
+               dev_err(&spi->dev, "spi buffer size too small (%d) (%zu)\n",
                         len2, ARRAY_SIZE(wb));
                result = N_FAIL;
                return result;
@@ -251,7 +251,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
        rix = len;
 
        if (!wilc_spi_write_read(wilc, wb, rb, len2)) {
-               PRINT_ER("[wilc spi]: Failed cmd write, bus error...\n");
+               dev_err(&spi->dev, "Failed cmd write, bus error...\n");
                result = N_FAIL;
                return result;
        }
@@ -271,7 +271,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
        /* } while(&rptr[1] <= &rb[len2]); */
 
        if (rsp != cmd) {
-               PRINT_ER("[wilc spi]: Failed cmd response, cmd (%02x)"
+               dev_err(&spi->dev, "Failed cmd response, cmd (%02x)"
                         ", resp (%02x)\n", cmd, rsp);
                result = N_FAIL;
                return result;
@@ -282,8 +282,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
         **/
        rsp = rb[rix++];
        if (rsp != 0x00) {
-               PRINT_ER("[wilc spi]: Failed cmd state response "
-                        "state (%02x)\n", rsp);
+               dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+                       rsp);
                result = N_FAIL;
                return result;
        }
@@ -310,8 +310,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                } while (retry--);
 
                if (retry <= 0) {
-                       PRINT_ER("[wilc spi]: Error, data read "
-                                "response (%02x)\n", rsp);
+                       dev_err(&spi->dev,
+                               "Error, data read response (%02x)\n", rsp);
                        result = N_RESET;
                        return result;
                }
@@ -326,7 +326,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                b[2] = rb[rix++];
                                b[3] = rb[rix++];
                        } else {
-                               PRINT_ER("[wilc spi]: buffer overrun when reading data.\n");
+                               dev_err(&spi->dev,
+                                       "buffer overrun when reading data.\n");
                                result = N_FAIL;
                                return result;
                        }
@@ -339,7 +340,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                        crc[0] = rb[rix++];
                                        crc[1] = rb[rix++];
                                } else {
-                                       PRINT_ER("[wilc spi]: buffer overrun when reading crc.\n");
+                                       dev_err(&spi->dev,"buffer overrun when reading crc.\n");
                                        result = N_FAIL;
                                        return result;
                                }
@@ -366,7 +367,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                 * Read bytes
                                 **/
                                if (!wilc_spi_read(wilc, &b[ix], nbytes)) {
-                                       PRINT_ER("[wilc spi]: Failed data block read, bus error...\n");
+                                       dev_err(&spi->dev, "Failed data block read, bus error...\n");
                                        result = N_FAIL;
                                        goto _error_;
                                }
@@ -376,7 +377,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                 **/
                                if (!g_spi.crc_off) {
                                        if (!wilc_spi_read(wilc, crc, 2)) {
-                                               PRINT_ER("[wilc spi]: Failed data block crc read, bus error...\n");
+                                               dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
                                                result = N_FAIL;
                                                goto _error_;
                                        }
@@ -407,7 +408,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                retry = 10;
                                do {
                                        if (!wilc_spi_read(wilc, &rsp, 1)) {
-                                               PRINT_ER("[wilc spi]: Failed data response read, bus error...\n");
+                                               dev_err(&spi->dev, "Failed data response read, bus error...\n");
                                                result = N_FAIL;
                                                break;
                                        }
@@ -423,7 +424,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                 * Read bytes
                                 **/
                                if (!wilc_spi_read(wilc, &b[ix], nbytes)) {
-                                       PRINT_ER("[wilc spi]: Failed data block read, bus error...\n");
+                                       dev_err(&spi->dev, "Failed data block read, bus error...\n");
                                        result = N_FAIL;
                                        break;
                                }
@@ -433,7 +434,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
                                 **/
                                if (!g_spi.crc_off) {
                                        if (!wilc_spi_read(wilc, crc, 2)) {
-                                               PRINT_ER("[wilc spi]: Failed data block crc read, bus error...\n");
+                                               dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
                                                result = N_FAIL;
                                                break;
                                        }
@@ -450,6 +451,7 @@ _error_:
 
 static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int ix, nbytes;
        int result = 1;
        u8 cmd, order, crc[2] = {0};
@@ -483,7 +485,8 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
                }
                cmd |= order;
                if (!wilc_spi_write(wilc, &cmd, 1)) {
-                       PRINT_ER("[wilc spi]: Failed data block cmd write, bus error...\n");
+                       dev_err(&spi->dev,
+                               "Failed data block cmd write, bus error...\n");
                        result = N_FAIL;
                        break;
                }
@@ -492,7 +495,8 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
                 *      Write data
                 **/
                if (!wilc_spi_write(wilc, &b[ix], nbytes)) {
-                       PRINT_ER("[wilc spi]: Failed data block write, bus error...\n");
+                       dev_err(&spi->dev,
+                               "Failed data block write, bus error...\n");
                        result = N_FAIL;
                        break;
                }
@@ -502,7 +506,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
                 **/
                if (!g_spi.crc_off) {
                        if (!wilc_spi_write(wilc, crc, 2)) {
-                               PRINT_ER("[wilc spi]: Failed data block crc write, bus error...\n");
+                               dev_err(&spi->dev,"Failed data block crc write, bus error...\n");
                                result = N_FAIL;
                                break;
                        }
@@ -527,13 +531,14 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
 
 static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int result;
 
        dat = cpu_to_le32(dat);
        result = spi_cmd_complete(wilc, CMD_INTERNAL_WRITE, adr, (u8 *)&dat, 4,
                                  0);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed internal write cmd...\n");
+               dev_err(&spi->dev, "Failed internal write cmd...\n");
        }
 
        return result;
@@ -541,12 +546,13 @@ static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
 
 static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int result;
 
        result = spi_cmd_complete(wilc, CMD_INTERNAL_READ, adr, (u8 *)data, 4,
                                  0);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed internal read cmd...\n");
+               dev_err(&spi->dev, "Failed internal read cmd...\n");
                return 0;
        }
 
@@ -563,6 +569,7 @@ static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
 
 static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int result = N_OK;
        u8 cmd = CMD_SINGLE_WRITE;
        u8 clockless = 0;
@@ -576,7 +583,7 @@ static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
 
        result = spi_cmd_complete(wilc, cmd, addr, (u8 *)&data, 4, clockless);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed cmd, write reg (%08x)...\n", addr);
+               dev_err(&spi->dev, "Failed cmd, write reg (%08x)...\n", addr);
        }
 
        return result;
@@ -584,6 +591,7 @@ static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
 
 static int _wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int result;
        u8 cmd = CMD_DMA_EXT_WRITE;
 
@@ -595,7 +603,8 @@ static int _wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
        result = spi_cmd_complete(wilc, cmd, addr, NULL, size, 0);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed cmd, write block (%08x)...\n", addr);
+               dev_err(&spi->dev,
+                       "Failed cmd, write block (%08x)...\n", addr);
                return 0;
        }
 
@@ -604,7 +613,7 @@ static int _wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
         **/
        result = spi_data_write(wilc, buf, size);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed block data write...\n");
+               dev_err(&spi->dev, "Failed block data write...\n");
        }
 
        return 1;
@@ -612,12 +621,13 @@ static int _wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
 static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int result = N_OK;
        u8 cmd = CMD_SINGLE_READ;
        u8 clockless = 0;
 
        if (addr < 0x30) {
-               /* PRINT_ER("***** read addr %d\n\n", addr); */
+               /* dev_err(&spi->dev, "***** read addr %d\n\n", addr); */
                /* Clockless register*/
                cmd = CMD_INTERNAL_READ;
                clockless = 1;
@@ -625,7 +635,7 @@ static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 
        result = spi_cmd_complete(wilc, cmd, addr, (u8 *)data, 4, clockless);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed cmd, read reg (%08x)...\n", addr);
+               dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
                return 0;
        }
 
@@ -636,6 +646,7 @@ static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 
 static int _wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u8 cmd = CMD_DMA_EXT_READ;
        int result;
 
@@ -644,7 +655,7 @@ static int _wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
        result = spi_cmd_complete(wilc, cmd, addr, buf, size, 0);
        if (result != N_OK) {
-               PRINT_ER("[wilc spi]: Failed cmd, read block (%08x)...\n", addr);
+               dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
                return 0;
        }
 
@@ -659,10 +670,12 @@ static int _wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
 static int wilc_spi_clear_int(struct wilc *wilc)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u32 reg;
 
        if (!wilc_spi_read_reg(wilc, WILC_HOST_RX_CTRL_0, &reg)) {
-               PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_HOST_RX_CTRL_0);
+               dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+                       WILC_HOST_RX_CTRL_0);
                return 0;
        }
        reg &= ~0x1;
@@ -680,6 +693,7 @@ static int _wilc_spi_deinit(struct wilc *wilc)
 
 static int wilc_spi_sync(struct wilc *wilc)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u32 reg;
        int ret;
 
@@ -688,13 +702,15 @@ static int wilc_spi_sync(struct wilc *wilc)
         **/
        ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, &reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
+               dev_err(&spi->dev,"Failed read reg (%08x)...\n",
+                       WILC_PIN_MUX_0);
                return 0;
        }
        reg |= BIT(8);
        ret = wilc_spi_write_reg(wilc, WILC_PIN_MUX_0, reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
+               dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+                       WILC_PIN_MUX_0);
                return 0;
        }
 
@@ -703,13 +719,15 @@ static int wilc_spi_sync(struct wilc *wilc)
         **/
        ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, &reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
+               dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+                       WILC_INTR_ENABLE);
                return 0;
        }
        reg |= BIT(16);
        ret = wilc_spi_write_reg(wilc, WILC_INTR_ENABLE, reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
+               dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+                       WILC_INTR_ENABLE);
                return 0;
        }
 
@@ -718,6 +736,7 @@ static int wilc_spi_sync(struct wilc *wilc)
 
 static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u32 reg;
        u32 chipid;
 
@@ -726,7 +745,7 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
        if (isinit) {
 
                if (!wilc_spi_read_reg(wilc, 0x1000, &chipid)) {
-                       PRINT_ER("[wilc spi]: Fail cmd read chip id...\n");
+                       dev_err(&spi->dev, "Fail cmd read chip id...\n");
                        return 0;
                }
                return 1;
@@ -734,9 +753,8 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
 
        memset(&g_spi, 0, sizeof(wilc_spi_t));
 
-       g_spi.dPrint = func;
        if (!wilc_spi_init()) {
-               PRINT_ER("[wilc spi]: Failed io init bus...\n");
+               dev_err(&spi->dev, "Failed io init bus...\n");
                return 0;
        } else {
                return 0;
@@ -753,10 +771,11 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
                /* Read failed. Try with CRC off. This might happen when module
                 * is removed but chip isn't reset*/
                g_spi.crc_off = 1;
-               PRINT_ER("[wilc spi]: Failed internal read protocol with CRC on, retyring with CRC off...\n");
+               dev_err(&spi->dev, "Failed internal read protocol with CRC on, retyring with CRC off...\n");
                if (!spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, &reg)) {
                        /* Reaad failed with both CRC on and off, something went bad */
-                       PRINT_ER("[wilc spi]: Failed internal read protocol...\n");
+                       dev_err(&spi->dev,
+                               "Failed internal read protocol...\n");
                        return 0;
                }
        }
@@ -765,7 +784,7 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
                reg &= ~0x70;
                reg |= (0x5 << 4);
                if (!spi_internal_write(wilc, WILC_SPI_PROTOCOL_OFFSET, reg)) {
-                       PRINT_ER("[wilc spi %d]: Failed internal write protocol reg...\n", __LINE__);
+                       dev_err(&spi->dev, "[wilc spi %d]: Failed internal write protocol reg...\n", __LINE__);
                        return 0;
                }
                g_spi.crc_off = 1;
@@ -776,10 +795,10 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
         *      make sure can read back chip id correctly
         **/
        if (!wilc_spi_read_reg(wilc, 0x1000, &chipid)) {
-               PRINT_ER("[wilc spi]: Fail cmd read chip id...\n");
+               dev_err(&spi->dev, "Fail cmd read chip id...\n");
                return 0;
        }
-       /* PRINT_ER("[wilc spi]: chipid (%08x)\n", chipid); */
+       /* dev_err(&spi->dev, "chipid (%08x)\n", chipid); */
 
        g_spi.has_thrpt_enh = 1;
 
@@ -790,6 +809,7 @@ static int _wilc_spi_init(struct wilc *wilc, wilc_debug_func func)
 
 static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int ret;
 
        if (g_spi.has_thrpt_enh) {
@@ -803,7 +823,8 @@ static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
                ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE,
                                        &byte_cnt);
                if (!ret) {
-                       PRINT_ER("[wilc spi]: Failed read WILC_VMM_TO_HOST_SIZE ...\n");
+                       dev_err(&spi->dev,
+                               "Failed read WILC_VMM_TO_HOST_SIZE ...\n");
                        goto _fail_;
                }
                tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
@@ -820,6 +841,7 @@ _fail_:
 
 static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int ret;
 
        if (g_spi.has_thrpt_enh) {
@@ -832,7 +854,8 @@ static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
                ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE,
                                        &byte_cnt);
                if (!ret) {
-                       PRINT_ER("[wilc spi]: Failed read WILC_VMM_TO_HOST_SIZE ...\n");
+                       dev_err(&spi->dev,
+                               "Failed read WILC_VMM_TO_HOST_SIZE ...\n");
                        goto _fail_;
                }
                tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
@@ -861,7 +884,7 @@ static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
                                        unkmown_mask = ~((1ul << g_spi.nint) - 1);
 
                                        if ((tmp >> IRG_FLAGS_OFFSET) & unkmown_mask) {
-                                               PRINT_ER("[wilc spi]: Unexpected interrupt (2): j=%d, tmp=%x, mask=%x\n", j, tmp, unkmown_mask);
+                                               dev_err(&spi->dev, "Unexpected interrupt (2): j=%d, tmp=%x, mask=%x\n", j, tmp, unkmown_mask);
                                                happended = 1;
                                        }
                                }
@@ -879,6 +902,7 @@ _fail_:
 
 static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        int ret;
 
        if (g_spi.has_thrpt_enh) {
@@ -901,12 +925,16 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
                                flags >>= 1;
                        }
                        if (!ret) {
-                               PRINT_ER("[wilc spi]: Failed wilc_spi_write_reg, set reg %x ...\n", 0x10c8 + i * 4);
+                               dev_err(&spi->dev,
+                                       "Failed wilc_spi_write_reg, set reg %x ...\n",
+                                       0x10c8 + i * 4);
                                goto _fail_;
                        }
                        for (i = g_spi.nint; i < MAX_NUM_INT; i++) {
                                if (flags & 1)
-                                       PRINT_ER("[wilc spi]: Unexpected interrupt cleared %d...\n", i);
+                                       dev_err(&spi->dev,
+                                               "Unexpected interrupt cleared %d...\n",
+                                               i);
                                flags >>= 1;
                        }
                }
@@ -925,7 +953,8 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
                        ret = wilc_spi_write_reg(wilc, WILC_VMM_TBL_CTL,
                                                 tbl_ctl);
                        if (!ret) {
-                               PRINT_ER("[wilc spi]: fail write reg vmm_tbl_ctl...\n");
+                               dev_err(&spi->dev,
+                                       "fail write reg vmm_tbl_ctl...\n");
                                goto _fail_;
                        }
 
@@ -936,7 +965,7 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
                                ret = wilc_spi_write_reg(wilc,
                                                         WILC_VMM_CORE_CTL, 1);
                                if (!ret) {
-                                       PRINT_ER("[wilc spi]: fail write reg vmm_core_ctl...\n");
+                                       dev_err(&spi->dev,"fail write reg vmm_core_ctl...\n");
                                        goto _fail_;
                                }
                        }
@@ -948,11 +977,12 @@ _fail_:
 
 static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
 {
+       struct spi_device *spi = to_spi_device(wilc->dev);
        u32 reg;
        int ret, i;
 
        if (nint > MAX_NUM_INT) {
-               PRINT_ER("[wilc spi]: Too many interupts (%d)...\n", nint);
+               dev_err(&spi->dev, "Too many interupts (%d)...\n", nint);
                return 0;
        }
 
@@ -963,13 +993,15 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
         **/
        ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, &reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
+               dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+                       WILC_PIN_MUX_0);
                return 0;
        }
        reg |= BIT(8);
        ret = wilc_spi_write_reg(wilc, WILC_PIN_MUX_0, reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
+               dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+                       WILC_PIN_MUX_0);
                return 0;
        }
 
@@ -978,7 +1010,8 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
         **/
        ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, &reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
+               dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+                       WILC_INTR_ENABLE);
                return 0;
        }
 
@@ -987,13 +1020,15 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
        }
        ret = wilc_spi_write_reg(wilc, WILC_INTR_ENABLE, reg);
        if (!ret) {
-               PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
+               dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+                       WILC_INTR_ENABLE);
                return 0;
        }
        if (nint) {
                ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
                if (!ret) {
-                       PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR2_ENABLE);
+                       dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+                               WILC_INTR2_ENABLE);
                        return 0;
                }
 
@@ -1003,7 +1038,8 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
 
                ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
                if (!ret) {
-                       PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR2_ENABLE);
+                       dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+                               WILC_INTR2_ENABLE);
                        return 0;
                }
        }