V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed

Currently, the logic to load ir i2c ancillary module is broken. It is
associated to Hauppauge devices with IR flag on their eeprom, no matter
if the device uses i2c or em28xx direct IR support. That's wrong.

Instead, add a flag to the boards that use i2c IR chips and load the
module only for those devices and if ir is not disabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c55634a..a3d6d4a 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -299,6 +299,7 @@ struct em28xx_board em28xx_boards[] = {
        [EM2820_BOARD_TERRATEC_CINERGY_250] = {
                .name         = "Terratec Cinergy 250 USB",
                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+               .has_ir_i2c   = 1,
                .tda9887_conf = TDA9887_PRESENT,
                .decoder      = EM28XX_SAA711X,
                .input        = { {
@@ -318,6 +319,7 @@ struct em28xx_board em28xx_boards[] = {
        [EM2820_BOARD_PINNACLE_USB_2] = {
                .name         = "Pinnacle PCTV USB 2",
                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+               .has_ir_i2c   = 1,
                .tda9887_conf = TDA9887_PRESENT,
                .decoder      = EM28XX_SAA711X,
                .input        = { {
@@ -342,6 +344,7 @@ struct em28xx_board em28xx_boards[] = {
                                TDA9887_PORT2_ACTIVE,
                .decoder      = EM28XX_TVP5150,
                .has_msp34xx  = 1,
+               .has_ir_i2c   = 1,
                .input        = { {
                        .type     = EM28XX_VMUX_TELEVISION,
                        .vmux     = TVP5150_COMPOSITE0,
@@ -960,6 +963,7 @@ struct em28xx_board em28xx_boards[] = {
        [EM2800_BOARD_TERRATEC_CINERGY_200] = {
                .name         = "Terratec Cinergy 200 USB",
                .is_em2800    = 1,
+               .has_ir_i2c   = 1,
                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
                .tda9887_conf = TDA9887_PRESENT,
                .decoder      = EM28XX_SAA711X,
@@ -2277,7 +2281,7 @@ void em28xx_card_setup(struct em28xx *dev)
        case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
        {
                struct tveeprom tv;
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) && defined(MODULE)
                request_module("tveeprom");
 #endif
                /* Call first TVeeprom */
@@ -2291,10 +2295,6 @@ void em28xx_card_setup(struct em28xx *dev)
                        dev->i2s_speed = 2048000;
                        dev->board.has_msp34xx = 1;
                }
-#ifdef CONFIG_MODULES
-               if (tv.has_ir)
-                       request_module("ir-kbd-i2c");
-#endif
                break;
        }
        case EM2882_BOARD_KWORLD_ATSC_315U:
@@ -2335,6 +2335,10 @@ void em28xx_card_setup(struct em28xx *dev)
                break;
        }
 
+#if defined(CONFIG_MODULES) && defined(MODULE)
+       if (dev->board.has_ir_i2c && !disable_ir)
+               request_module("ir-kbd-i2c");
+#endif
        if (dev->board.has_snapshot_button)
                em28xx_register_snapshot_button(dev);
 

diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index bc825bd..0f2ba9a 100644 (file)
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -399,6 +399,7 @@ struct em28xx_board {
        unsigned int has_snapshot_button:1;
        unsigned int is_webcam:1;
        unsigned int valid:1;
+       unsigned int has_ir_i2c:1;
 
        unsigned char xclk, i2c_speed;
        unsigned char radio_addr;