+ Freescale i.MX Platforms Device Tree Bindings
+ -----------------------------------------------
+
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
++
+ i.MX6 Quad SABRE Automotive Board
+ Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || SOC_IMX6Q
++ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_HIGHBANK_UART
+ bool "Kernel low-level debugging messages via Highbank UART"
+ depends on ARCH_HIGHBANK
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UART on Highbank based devices.
+
+ config DEBUG_IMX1_UART
+ bool "i.MX1 Debug UART"
+ depends on SOC_IMX1
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX1.
+
+ config DEBUG_IMX23_UART
+ bool "i.MX23 Debug UART"
+ depends on SOC_IMX23
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX23.
+
+ config DEBUG_IMX25_UART
+ bool "i.MX25 Debug UART"
+ depends on SOC_IMX25
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX25.
+
+ config DEBUG_IMX21_IMX27_UART
+ bool "i.MX21 and i.MX27 Debug UART"
+ depends on SOC_IMX21 || SOC_IMX27
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX21 or i.MX27.
+
+ config DEBUG_IMX28_UART
+ bool "i.MX28 Debug UART"
+ depends on SOC_IMX28
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX28.
+
+ config DEBUG_IMX31_IMX35_UART
+ bool "i.MX31 and i.MX35 Debug UART"
+ depends on SOC_IMX31 || SOC_IMX35
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX31 or i.MX35.
+
+ config DEBUG_IMX51_UART
+ bool "i.MX51 Debug UART"
+ depends on SOC_IMX51
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX51.
+
+ config DEBUG_IMX50_IMX53_UART
+ bool "i.MX50 and i.MX53 Debug UART"
+ depends on SOC_IMX50 || SOC_IMX53
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50 or i.MX53.
+
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
endchoice
config EARLY_PRINTK
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+ REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
+ extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
#define imx50_handle_irq tzic_handle_irq
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
+ #define imx6q_handle_irq gic_handle_irq
+ extern void imx_enable_cpu(int cpu, bool enable);
+ extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+ #ifdef CONFIG_DEBUG_LL
+ extern void imx_lluart_map_io(void);
+ #else
+ static inline void imx_lluart_map_io(void) {}
+ #endif
+ extern void v7_cpu_resume(void);
+ extern u32 *pl310_get_save_ptr(void);
+ #ifdef CONFIG_SMP
+ extern void v7_secondary_startup(void);
+ extern void imx_scu_map_io(void);
+ extern void imx_smp_prepare(void);
+ #else
+ static inline void imx_scu_map_io(void) {}
+ static inline void imx_smp_prepare(void) {}
+ #endif
+ extern void imx_enable_cpu(int cpu, bool enable);
+ extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+ extern void imx_src_init(void);
+ extern void imx_gpc_init(void);
+ extern void imx_gpc_pre_suspend(void);
+ extern void imx_gpc_post_resume(void);
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
+ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+ extern void imx6q_pm_init(void);
#endif
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff