usb: pch_udc: Fixed issue which does not work with g_serial
authorToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Wed, 29 Dec 2010 01:07:33 +0000 (10:07 +0900)
committerGreg Kroah-Hartman <gregkh@suse.de>
Sun, 23 Jan 2011 02:36:42 +0000 (18:36 -0800)
This PCH_UDC driver does not work normally when "Serial gadget" is used.
The receiving data of control transmission (EP0 Control OUT Transaction)
has not received correctly.

This patch fixed this issue.
The following was modified.
 - The buffer size.
 - The change processing of a receiving buffer
   (The temporary buffer and the buffer prepared by gadget).
 - The setup processing of a DMA descriptor.

Currently the PCH_UDC driver can work normally with "Serial gadget"
or "File-backed Storage Gadget".

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/gadget/pch_udc.c

index 0c8dd81..dfe927b 100644 (file)
 #define PCH_UDC_BRLEN          0x0F    /* Burst length */
 #define PCH_UDC_THLEN          0x1F    /* Threshold length */
 /* Value of EP Buffer Size */
-#define UDC_EP0IN_BUFF_SIZE    64
-#define UDC_EPIN_BUFF_SIZE     512
-#define UDC_EP0OUT_BUFF_SIZE   64
-#define UDC_EPOUT_BUFF_SIZE    512
+#define UDC_EP0IN_BUFF_SIZE    16
+#define UDC_EPIN_BUFF_SIZE     256
+#define UDC_EP0OUT_BUFF_SIZE   16
+#define UDC_EPOUT_BUFF_SIZE    256
 /* Value of EP maximum packet size */
 #define UDC_EP0IN_MAX_PKT_SIZE 64
 #define UDC_EP0OUT_MAX_PKT_SIZE        64
@@ -351,7 +351,7 @@ struct pch_udc_dev {
        struct pci_pool         *data_requests;
        struct pci_pool         *stp_requests;
        dma_addr_t                      dma_addr;
-       unsigned long                   ep0out_buf[64];
+       void                            *ep0out_buf;
        struct usb_ctrlrequest          setup_data;
        unsigned long                   phys_addr;
        void __iomem                    *base_addr;
@@ -1219,11 +1219,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
        dev = ep->dev;
        if (req->dma_mapped) {
                if (ep->in)
-                       pci_unmap_single(dev->pdev, req->req.dma,
-                                        req->req.length, PCI_DMA_TODEVICE);
+                       dma_unmap_single(&dev->pdev->dev, req->req.dma,
+                                        req->req.length, DMA_TO_DEVICE);
                else
-                       pci_unmap_single(dev->pdev, req->req.dma,
-                                        req->req.length, PCI_DMA_FROMDEVICE);
+                       dma_unmap_single(&dev->pdev->dev, req->req.dma,
+                                        req->req.length, DMA_FROM_DEVICE);
                req->dma_mapped = 0;
                req->req.dma = DMA_ADDR_INVALID;
        }
@@ -1414,7 +1414,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
 
        pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
        td_data = req->td_data;
-       ep->td_data = req->td_data;
        /* Set the status bits for all descriptors */
        while (1) {
                td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
@@ -1613,15 +1612,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
        if (usbreq->length &&
            ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
                if (ep->in)
-                       usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
-                                       usbreq->length, PCI_DMA_TODEVICE);
+                       usbreq->dma = dma_map_single(&dev->pdev->dev,
+                                                    usbreq->buf,
+                                                    usbreq->length,
+                                                    DMA_TO_DEVICE);
                else
-                       usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
-                                       usbreq->length, PCI_DMA_FROMDEVICE);
+                       usbreq->dma = dma_map_single(&dev->pdev->dev,
+                                                    usbreq->buf,
+                                                    usbreq->length,
+                                                    DMA_FROM_DEVICE);
                req->dma_mapped = 1;
        }
        if (usbreq->length > 0) {
-               retval = prepare_dma(ep, req, gfp);
+               retval = prepare_dma(ep, req, GFP_ATOMIC);
                if (retval)
                        goto probe_end;
        }
@@ -1646,7 +1649,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
                        pch_udc_wait_ep_stall(ep);
                        pch_udc_ep_clear_nak(ep);
                        pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
-                       pch_udc_set_dma(dev, DMA_DIR_TX);
                }
        }
        /* Now add this request to the ep's pending requests */
@@ -1926,6 +1928,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
            PCH_UDC_BS_DMA_DONE)
                return;
        pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+       pch_udc_ep_set_ddptr(ep, 0);
        if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
            PCH_UDC_RTS_SUCC) {
                dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
@@ -1963,7 +1966,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
        u32     epsts;
        struct pch_udc_ep       *ep;
 
-       ep = &dev->ep[2*ep_num];
+       ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
        epsts = ep->epsts;
        ep->epsts = 0;
 
@@ -2008,7 +2011,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
        struct pch_udc_ep               *ep;
        struct pch_udc_request          *req = NULL;
 
-       ep = &dev->ep[2*ep_num + 1];
+       ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
        epsts = ep->epsts;
        ep->epsts = 0;
 
@@ -2025,10 +2028,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
        }
        if (epsts & UDC_EPSTS_HE)
                return;
-       if (epsts & UDC_EPSTS_RSS)
+       if (epsts & UDC_EPSTS_RSS) {
                pch_udc_ep_set_stall(ep);
                pch_udc_enable_ep_interrupts(ep->dev,
                                             PCH_UDC_EPINT(ep->in, ep->num));
+       }
        if (epsts & UDC_EPSTS_RCS) {
                if (!dev->prot_stall) {
                        pch_udc_ep_clear_stall(ep);
@@ -2060,8 +2064,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
 {
        u32     epsts;
        struct pch_udc_ep       *ep;
+       struct pch_udc_ep       *ep_out;
 
        ep = &dev->ep[UDC_EP0IN_IDX];
+       ep_out = &dev->ep[UDC_EP0OUT_IDX];
        epsts = ep->epsts;
        ep->epsts = 0;
 
@@ -2073,8 +2079,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
                return;
        if (epsts & UDC_EPSTS_HE)
                return;
-       if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+       if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
                pch_udc_complete_transfer(ep);
+               pch_udc_clear_dma(dev, DMA_DIR_RX);
+               ep_out->td_data->status = (ep_out->td_data->status &
+                                       ~PCH_UDC_BUFF_STS) |
+                                       PCH_UDC_BS_HST_RDY;
+               pch_udc_ep_clear_nak(ep_out);
+               pch_udc_set_dma(dev, DMA_DIR_RX);
+               pch_udc_ep_set_rrdy(ep_out);
+       }
        /* On IN interrupt, provide data if we have any */
        if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
             !(epsts & UDC_EPSTS_TXEMPTY))
@@ -2102,11 +2116,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
                dev->stall = 0;
                dev->ep[UDC_EP0IN_IDX].halted = 0;
                dev->ep[UDC_EP0OUT_IDX].halted = 0;
-               /* In data not ready */
-               pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
                dev->setup_data = ep->td_stp->request;
                pch_udc_init_setup_buff(ep->td_stp);
-               pch_udc_clear_dma(dev, DMA_DIR_TX);
+               pch_udc_clear_dma(dev, DMA_DIR_RX);
                pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
                                      dev->ep[UDC_EP0IN_IDX].in);
                if ((dev->setup_data.bRequestType & USB_DIR_IN))
@@ -2122,14 +2134,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
                setup_supported = dev->driver->setup(&dev->gadget,
                                                     &dev->setup_data);
                spin_lock(&dev->lock);
+
+               if (dev->setup_data.bRequestType & USB_DIR_IN) {
+                       ep->td_data->status = (ep->td_data->status &
+                                               ~PCH_UDC_BUFF_STS) |
+                                               PCH_UDC_BS_HST_RDY;
+                       pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+               }
                /* ep0 in returns data on IN phase */
                if (setup_supported >= 0 && setup_supported <
                                            UDC_EP0IN_MAX_PKT_SIZE) {
                        pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
                        /* Gadget would have queued a request when
                         * we called the setup */
-                       pch_udc_set_dma(dev, DMA_DIR_RX);
-                       pch_udc_ep_clear_nak(ep);
+                       if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
+                               pch_udc_set_dma(dev, DMA_DIR_RX);
+                               pch_udc_ep_clear_nak(ep);
+                       }
                } else if (setup_supported < 0) {
                        /* if unsupported request, then stall */
                        pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
@@ -2142,22 +2163,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
                }
        } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
                     UDC_EPSTS_OUT_DATA) && !dev->stall) {
-               if (list_empty(&ep->queue)) {
-                       dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
-                       ep->td_data->status = (ep->td_data->status &
-                                              ~PCH_UDC_BUFF_STS) |
-                                              PCH_UDC_BS_HST_RDY;
-                       pch_udc_set_dma(dev, DMA_DIR_RX);
-               } else {
-                       /* control write */
-                       /* next function will pickuo an clear the status */
+               pch_udc_clear_dma(dev, DMA_DIR_RX);
+               pch_udc_ep_set_ddptr(ep, 0);
+               if (!list_empty(&ep->queue)) {
                        ep->epsts = stat;
-
-                       pch_udc_svc_data_out(dev, 0);
-                       /* re-program desc. pointer for possible ZLPs */
-                       pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
-                       pch_udc_set_dma(dev, DMA_DIR_RX);
+                       pch_udc_svc_data_out(dev, PCH_UDC_EP0);
                }
+               pch_udc_set_dma(dev, DMA_DIR_RX);
        }
        pch_udc_ep_set_rrdy(ep);
 }
@@ -2174,7 +2186,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
        struct pch_udc_ep       *ep;
        struct pch_udc_request *req;
 
-       ep = &dev->ep[2*ep_num];
+       ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
        if (!list_empty(&ep->queue)) {
                req = list_entry(ep->queue.next, struct pch_udc_request, queue);
                pch_udc_enable_ep_interrupts(ep->dev,
@@ -2196,13 +2208,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
        for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
                /* IN */
                if (ep_intr & (0x1 << i)) {
-                       ep = &dev->ep[2*i];
+                       ep = &dev->ep[UDC_EPIN_IDX(i)];
                        ep->epsts = pch_udc_read_ep_status(ep);
                        pch_udc_clear_ep_status(ep, ep->epsts);
                }
                /* OUT */
                if (ep_intr & (0x10000 << i)) {
-                       ep = &dev->ep[2*i+1];
+                       ep = &dev->ep[UDC_EPOUT_IDX(i)];
                        ep->epsts = pch_udc_read_ep_status(ep);
                        pch_udc_clear_ep_status(ep, ep->epsts);
                }
@@ -2563,9 +2575,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
        dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
        dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
 
-       dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
-                                 PCI_DMA_FROMDEVICE);
-
        /* remove ep0 in and out from the list.  They have own pointer */
        list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
        list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
@@ -2637,6 +2646,13 @@ static int init_dma_pools(struct pch_udc_dev *dev)
        dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
        dev->ep[UDC_EP0IN_IDX].td_data = NULL;
        dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+
+       dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL);
+       if (!dev->ep0out_buf)
+               return -ENOMEM;
+       dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf,
+                                      UDC_EP0OUT_BUFF_SIZE * 4,
+                                      DMA_FROM_DEVICE);
        return 0;
 }
 
@@ -2750,6 +2766,11 @@ static void pch_udc_remove(struct pci_dev *pdev)
                pci_pool_destroy(dev->stp_requests);
        }
 
+       if (dev->dma_addr)
+               dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
+                                UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
+       kfree(dev->ep0out_buf);
+
        pch_udc_exit(dev);
 
        if (dev->irq_registered)
@@ -2792,11 +2813,7 @@ static int pch_udc_resume(struct pci_dev *pdev)
        int ret;
 
        pci_set_power_state(pdev, PCI_D0);
-       ret = pci_restore_state(pdev);
-       if (ret) {
-               dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
-               return ret;
-       }
+       pci_restore_state(pdev);
        ret = pci_enable_device(pdev);
        if (ret) {
                dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);