arm64: dts: freescale: align SPI NOR node name with dtschema

The node names should be generic and SPI NOR dtschema expects "flash".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe0..6fab73d 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -104,21 +104,21 @@
 
 &dspi {
        status = "okay";
-       dflash0: n25q128a@0 {
+       dflash0: flash@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";
                spi-max-frequency = <3000000>;
                reg = <0>;
        };
-       dflash1: sst25wf040b@1 {
+       dflash1: flash@1 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";
                spi-max-frequency = <3000000>;
                reg = <1>;
        };
-       dflash2: en25s64@2 {
+       dflash2: flash@2 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";
@@ -129,7 +129,7 @@
 
 &qspi {
        status = "okay";
-       flash0: s25fl256s1@0 {
+       flash0: flash@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";
@@ -138,7 +138,7 @@
                spi-tx-bus-width = <4>;
                reg = <0>;
        };
-       flash2: s25fl256s1@2 {
+       flash2: flash@2 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4f..f8135c5 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -100,7 +100,7 @@
 
 &dspi {
        status = "okay";
-       dflash0: n25q512a@0 {
+       dflash0: flash@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "st,m25p80";

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 7c4af71..0dbdc9e 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -98,7 +98,7 @@
        pinctrl-1 = <&pinctrl_flexspi1>;
        status = "okay";
 
-       flash0: spi-flash@0 {
+       flash0: flash@0 {
                reg = <0>;
                #address-cells = <1>;
                #size-cells = <1>;

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 22a5ef7..8f90eb0 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -66,7 +66,7 @@
        cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
        status = "okay";
 
-       spi-flash@0 {
+       flash@0 {
                compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
                spi-max-frequency = <80000000>;
                reg = <0>;