ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
authorAdam Ford <aford173@gmail.com>
Sat, 20 Feb 2016 07:27:52 +0000 (01:27 -0600)
committerTony Lindgren <tony@atomide.com>
Mon, 22 Feb 2016 18:56:38 +0000 (10:56 -0800)
The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM.
While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not
obtain an FCC ID, so anyone who uses it will have to go through certification.

I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic
power management, however the overall current seems high.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts [new file with mode: 0644]
arch/arm/boot/dts/logicpd-som-lv.dtsi [new file with mode: 0644]

diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
new file mode 100644 (file)
index 0000000..da85984
--- /dev/null
@@ -0,0 +1,268 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+       model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+       compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpio_key_pins>;
+
+               sysboot2 {
+                       label = "gpio3";
+                       gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;    /* gpio_111 / uP_GPIO_3 */
+                       linux,code = <BTN_0>;
+                       wakeup-source;
+               };
+       };
+
+       sound {
+               compatible = "ti,omap-twl4030";
+               ti,model = "omap3logic";
+               ti,mcbsp = <&mcbsp2>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+               led1 {
+                       label = "led1";
+                       gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;     /* gpio133 */
+                       linux,default-trigger = "cpu0";
+               };
+
+               led2 {
+                       label = "led2";
+                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;    /* gpio11 */
+                       linux,default-trigger = "none";
+               };
+       };
+};
+
+&vaux1 {
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+       status = "okay";
+};
+
+&charger {
+       ti,bb-uvolt = <3200000>;
+       ti,bb-uamp = <150>;
+};
+
+&gpmc {
+       ranges = <1 0 0x08000000 0x1000000>;    /* CS1: 16MB for LAN9221 */
+
+       ethernet@gpmc {
+               pinctrl-names = "default";
+               pinctrl-0 = <&lan9221_pins>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;           /* gpio_152 */
+               reg = <1 0 0xff>;
+       };
+};
+
+&vpll2 {
+       regulator-always-on;
+};
+
+&dss {
+       status = "ok";
+       vdds_dsi-supply = <&vpll2>;
+       vdda_video-supply = <&video_reg>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&dss_dpi_pins1>;
+       port {
+               dpi_out: endpoint {
+                       remote-endpoint = <&lcd_in>;
+                       data-lines = <16>;
+               };
+       };
+};
+
+/ {
+       aliases {
+               display0 = &lcd0;
+       };
+
+       video_reg: video_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-supply";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       lcd0: display@0 {
+               compatible = "panel-dpi";
+               label = "28";
+               status = "okay";
+               /* default-on; */
+               pinctrl-names = "default";
+               pinctrl-0 = <&lcd_enable_pin>;
+               enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;    /* gpio155, lcd INI */
+               port {
+                       lcd_in: endpoint {
+                               remote-endpoint = <&dpi_out>;
+                       };
+               };
+
+               panel-timing {
+                       clock-frequency = <9000000>;
+                       hactive = <480>;
+                       vactive = <272>;
+                       hfront-porch = <3>;
+                       hback-porch = <2>;
+                       hsync-len = <42>;
+                       vback-porch = <3>;
+                       vfront-porch = <2>;
+                       vsync-len = <11>;
+                       hsync-active = <1>;
+                       vsync-active = <1>;
+                       de-active = <1>;
+                       pixelclk-active = <0>;
+               };
+       };
+
+       bl: backlight {
+               compatible = "pwm-backlight";
+               pinctrl-names = "default";
+               pinctrl-0 = <&backlight_pins>;
+               pwms = <&twl_pwm 0 5000000>;
+               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+               default-brightness-level = <7>;
+               enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+       };
+};
+
+&mmc1 {
+       interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+       wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;                /* gpio_126 */
+       cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;              /* gpio_110 */
+       vmmc-supply = <&vmmc1>;
+       bus-width = <4>;
+       cap-power-off-card;
+};
+
+&omap3_pmx_core {
+       gpio_key_pins: pinmux_gpio_key_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/
+               >;
+       };
+
+       led_pins: pinmux_led_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)        /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+               >;
+       };
+
+       lan9221_pins: pinmux_lan9221_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+               >;
+       };
+
+       mmc1_pins: pinmux_mmc1_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)       /* sdmmc1_clk.sdmmc1_clk */
+                       OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
+                       OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat0.sdmmc1_dat0 */
+                       OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
+                       OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
+                       OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/
+               >;
+       };
+
+       lcd_enable_pin: pinmux_lcd_enable_pin {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+               >;
+       };
+
+       dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+                       OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+                       OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+                       OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+                       OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
+                       OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
+                       OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
+                       OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
+                       OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
+                       OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
+                       OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+                       OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+                       OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+                       OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+                       OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+                       OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+                       OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+                       OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+                       OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+                       OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+               >;
+       };
+};
+
+&omap3_pmx_wkup {
+       led_pins_wkup: pinmux_led_pins_wkup {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */
+               >;
+       };
+
+       backlight_pins: pinmux_backlight_pins {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
+               >;
+       };
+
+       mmc1_cd: pinmux_mmc1_cd {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)  /* cam_d11.gpio_110 */
+               >;
+       };
+};
+
+
+&uart1 {
+       interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+       pinctrl-names = "default";
+       pinctrl-0 = <&hsusb_otg_pins>;
+       interface-type = <0>;
+       usb-phy = <&usb2_phy>;
+       phys = <&usb2_phy>;
+       phy-names = "usb2-phy";
+       mode = <3>;
+       power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
new file mode 100644 (file)
index 0000000..aa9572b
--- /dev/null
@@ -0,0 +1,208 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       cpus {
+               cpu@0 {
+                       cpu0-supply = <&vcc>;
+               };
+       };
+
+       wl12xx_vmmc: wl12xx_vmmc {
+               compatible = "regulator-fixed";
+               regulator-name = "vwl1271";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               gpio = <&gpio1 3 0>;   /* gpio_3 */
+               startup-delay-us = <70000>;
+               enable-active-high;
+               vin-supply = <&vmmc2>;
+       };
+};
+
+&gpmc {
+       ranges = <0 0 0x00000000 0x1000000>;    /* CS0: 16MB for NAND */
+
+       nand@0,0 {
+               linux,mtd-name = "micron,mt29f4g16abbda3w";
+               reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+               nand-bus-width = <16>;
+               ti,nand-ecc-opt = "bch8";
+               gpmc,sync-clk-ps = <0>;
+               gpmc,cs-on-ns = <0>;
+               gpmc,cs-rd-off-ns = <44>;
+               gpmc,cs-wr-off-ns = <44>;
+               gpmc,adv-on-ns = <6>;
+               gpmc,adv-rd-off-ns = <34>;
+               gpmc,adv-wr-off-ns = <44>;
+               gpmc,we-off-ns = <40>;
+               gpmc,oe-off-ns = <54>;
+               gpmc,access-ns = <64>;
+               gpmc,rd-cycle-ns = <82>;
+               gpmc,wr-cycle-ns = <82>;
+               gpmc,wr-access-ns = <40>;
+               gpmc,wr-data-mux-bus-ns = <0>;
+               gpmc,device-width = <2>;
+
+               gpmc,page-burst-access-ns = <5>;
+               gpmc,cycle2cycle-delay-ns = <50>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+               x-loader@0 {
+                       label = "x-loader";
+                       reg = <0 0x80000>;
+               };
+
+               bootloaders@80000 {
+                       label = "u-boot";
+                       reg = <0x80000 0x1e0000>;
+               };
+
+               bootloaders_env@260000 {
+                       label = "u-boot-env";
+                       reg = <0x260000 0x20000>;
+               };
+
+               kernel@280000 {
+                       label = "kernel";
+                       reg = <0x280000 0x400000>;
+               };
+
+               filesystem@680000 {
+                       label = "fs";
+                       reg = <0x680000 0>;     /* 0 = MTDPART_SIZ_FULL */
+               };
+       };
+};
+
+&i2c1 {
+       clock-frequency = <2600000>;
+
+       twl: twl@48 {
+               reg = <0x48>;
+               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+               interrupt-parent = <&intc>;
+               twl_audio: audio {
+                       compatible = "ti,twl4030-audio";
+                       codec {
+                       };
+               };
+       };
+};
+
+&i2c2 {
+       clock-frequency = <400000>;
+};
+
+&i2c3 {
+       clock-frequency = <400000>;
+};
+
+&mmc3 {
+       interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+       pinctrl-0 = <&mmc3_pins>;
+       pinctrl-names = "default";
+       vmmc-supply = <&wl12xx_vmmc>;
+       non-removable;
+       bus-width = <4>;
+       cap-power-off-card;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       wlcore: wlcore@2 {
+               compatible = "ti,wl1273";
+               reg = <2>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+               ref-clock-frequency = <26000000>;
+       };
+};
+
+&omap3_pmx_core {
+       mmc3_pins: pinmux_mm3_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+                       OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+                       OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+                       OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+                       OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)       /* sys_boot1.gpio_3 */
+                       OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+                       OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
+               >;
+       };
+       mcbsp2_pins: pinmux_mcbsp2_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+                       OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+                       OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+                       OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+               >;
+       };
+       uart2_pins: pinmux_uart2_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)        /* uart2_cts.uart2_cts */
+                       OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)       /* uart2_rts .uart2_rts*/
+                       OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)       /* uart2_tx.uart2_tx */
+                       OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)        /* uart2_rx.uart2_rx */
+                       OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)       /* GPIO_162,BT_EN */
+               >;
+       };
+       mcspi1_pins: pinmux_mcspi1_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+                       OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+                       OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+                       OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+               >;
+       };
+       hsusb_otg_pins: pinmux_hsusb_otg_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)        /* hsusb0_clk.hsusb0_clk */
+                       OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)       /* hsusb0_stp.hsusb0_stp */
+                       OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)        /* hsusb0_dir.hsusb0_dir */
+                       OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)        /* hsusb0_nxt.hsusb0_nxt */
+                       OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)        /* hsusb0_data0.hsusb0_data0 */
+                       OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)        /* hsusb0_data1.hsusb0_data1 */
+                       OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)        /* hsusb0_data2.hsusb0_data2 */
+                       OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)        /* hsusb0_data3.hsusb0_data3 */
+                       OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)        /* hsusb0_data4.hsusb0_data4 */
+                       OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)        /* hsusb0_data5.hsusb0_data5 */
+                       OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)        /* hsusb0_data6.hsusb0_data6 */
+                       OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)        /* hsusb0_data7.hsusb0_data7 */
+               >;
+       };
+};
+
+&uart2 {
+       interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+       twl_power: power {
+               compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+               ti,use_poweroff;
+       };
+};
+
+&twl_gpio {
+       ti,use-leds;
+};