# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = xiberty libgloss newlib libio librx libstdc++ libg++ winsup
+TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
# This is set by the configure script to the arguments passed to configure.
CONFIG_ARGUMENTS =
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
+# RENAME these all-xinberty should be all-target-libiberty
ALL_TARGET_MODULES = \
- all-libio \
- all-libstdc++ \
- all-librx \
- all-libg++ \
- all-newlib \
- all-winsup \
- all-libgloss \
- all-xiberty
+ all-target-libio \
+ all-target-libstdc++ \
+ all-target-librx \
+ all-target-libg++ \
+ all-target-newlib \
+ all-target-winsup \
+ all-target-libgloss \
+ all-target-libiberty
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
- configure-libio \
- configure-libstdc++ \
- configure-librx \
- configure-libg++ \
- configure-newlib \
- configure-winsup \
- configure-libgloss \
- configure-xiberty
+ configure-target-libio \
+ configure-target-libstdc++ \
+ configure-target-librx \
+ configure-target-libg++ \
+ configure-target-newlib \
+ configure-target-winsup \
+ configure-target-libgloss \
+ configure-target-libiberty
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- check-libio \
- check-libstdc++ \
- check-libg++ \
- check-newlib \
- check-winsup \
- check-xiberty
+ check-target-libio \
+ check-target-libstdc++ \
+ check-target-libg++ \
+ check-target-newlib \
+ check-target-winsup \
+ check-target-libiberty
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
+CROSS=native # or CROSS=cross
+# Target libraries are put under this directory:
+TARGET_SUBDIR = . # Changed by configure to $(target_alias) if cross.
+
INSTALL_TARGET_MODULES = \
- install-libio \
- install-libstdc++ \
- install-libg++ \
- install-newlib \
- install-winsup \
- install-libgloss \
- install-xiberty
-
-# This is a shell case of all modules which are compiled using
-# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty | winsup
+ install-target-libio \
+ install-target-libstdc++ \
+ install-target-libg++ \
+ install-target-newlib \
+ install-target-winsup \
+ install-target-libgloss \
+ install-target-libiberty
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- for i in $(SUBDIRS) $(TARGET_CONFIGDIRS); do \
+ for i in $(SUBDIRS) -dummy-; do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
- $(TARGET_LIBS) ) \
- for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
- done; \
- ;; \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
+ done;\
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ export AR AS CC CXX NM RANLIB; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
done
# Here are the targets which correspond to the do-X targets.
# target tools.
.PHONY: $(CONFIGURE_TARGET_MODULES)
$(CONFIGURE_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/configure-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
true; \
elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
if [ -d $(srcdir)/$${dir} ]; then \
- if [ -d ./$${dir} ]; then true; else mkdir $${dir}; fi; \
+ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
AR="$(AR_FOR_TARGET)"; export AR; \
LD="$(LD_FOR_TARGET)"; export LD; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
- cd $${dir}; \
+ cd $(TARGET_SUBDIR)/$${dir}; \
$${srcroot}/configure $(CONFIG_ARGUMENTS) --srcdir=$${srcroot}/$${dir}; \
else \
true; \
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/all-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/check-target//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
+ (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): install-dirs
- @dir=`echo $@ | sed -e 's/install-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/install-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
-all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
+ALL_GCC = all_gcc
+all_gcc: all-libiberty all-byacc all-binutils all-gas all-ld
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements)
all-gprof: all-libiberty all-bfd
all-grep: all-libiberty
-all-gui: all-gdb all-libproc all-librx
+all-gui: all-gdb all-libproc all-target-librx
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-ispell: all-emacs19
all-ld: all-libiberty all-bfd all-byacc all-flex
-configure-libg++: all-gcc
-all-libg++: configure-libg++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc++
-configure-libgloss: all-gcc
-all-libgloss: configure-libgloss
-configure-libio: all-gcc
-all-libio: configure-libio all-gas all-ld all-gcc all-xiberty all-newlib
+configure-target-libg++: $(ALL_GCC)
+all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss
+configure-target-libio: $(ALL_GCC)
+all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
all-libiberty:
-configure-librx: all-gcc all-newlib
-all-librx: configure-librx
-configure-libstdc++: all-gcc
-all-libstdc++: configure-libstdc++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio
+configure-target-librx: $(ALL_GCC) configure-target-newlib
+all-target-librx: configure-target-librx
+configure-target-libstdc++: $(ALL_GCC)
+all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
-configure-newlib: all-gcc
-all-newlib: configure-newlib all-binutils all-gas all-gcc
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
all-opcodes: all-bfd
all-patch:
all-prms: all-libiberty
all-tgas: all-libiberty all-bfd
all-time:
all-wdiff:
-all-winsup: all-newlib
-configure-winsup: configure-newlib
+all-target-winsup: all-target-newlib
+configure-target-winsup: configure-target-newlib
all-uudecode: all-libiberty
-configure-xiberty: all-gcc
-all-xiberty: configure-xiberty all-gcc all-ld all-newlib
+configure-target-libiberty: $(ALL_GCC)
+all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
### other supporting targets
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure \
- COPYING COPYING.LIB install.sh
+ COPYING COPYING.LIB install.sh cfg-ml-com.in cfg-ml-pos.in
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
- configure.texi standards.texi make-stds.texi
-ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
+ configure.texi standards.texi make-stds.texi \
+ configure.info* standards.info* cfg-paper.info*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
@if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
$(end-sanitize-Sanitize)
./configure sun4
+ [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
+ CC_FOR_TARGET="$(CC) CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
- if grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ if [ ! -f $$d/Makefile ] ; then true ; \
+ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ (cd $$d ; $(MAKE) info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
- done ; \
- for i in $(ETC_SUPPORT_PFX); do \
- ln -s ../../etc/$$i* . ; \
done)
#
# Take out texinfo from configurable dirs
SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty xiberty
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="xiberty libgloss newlib libio librx libstdc++ libg++"
+target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
# these tools are built using the target libs, and are intended to run only
## These two lists are of directories that are to be removed from the
## ${configdirs} list for either cross-compilations or for native-
## compilations. For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile xiberty in
+## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
## a native environment.
# directories to be built in the native environment only
# directories to be built in a cross environment only
#
-cross_only="xiberty libgloss newlib"
+cross_only="target-libiberty target-libgloss target-newlib"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
# that are in the 'cross only' list
skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
+ target_subdir=.
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
+ target_subdir=${target_alias}
+ if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+ fi
fi
copy_dirs=
# Recognize --with-newlib/--without-newlib.
if [ x${with_newlib} = xno ]; then
- skipdirs="${skipdirs} newlib"
+ skipdirs="${skipdirs} target-newlib"
elif [ x${with_newlib} = xyes ]; then
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
fi
# Handle ${copy_dirs}
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty"
;;
*-*-vxworks5.1)
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
# work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
- noconfigdirs="$noconfigdirs ld emacs fileutils grep newlib"
+ noconfigdirs="$noconfigdirs ld emacs fileutils grep target-newlib"
;;
alpha*-*-*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
# start-sanitize-arc
arc-*-*)
;;
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
;;
hppa*-*-*elf* | \
hppa*-*-lites*)
;;
i[345]86-*-go32)
# but don't build gdb
- noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
i[345]86-*-win32)
noconfigdirs="$noconfigdirs gdb"
fi
# always build newlib.
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# and winsup
configdirs="$configdirs winsup"
;;
i[345]86-*-pe)
- noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
;;
i[345]86-*-sco*)
noconfigdirs="$noconfigdirs gprof"
# a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs ld newlib gprof textutils cvs"
+ noconfigdirs="$noconfigdirs ld target-newlib gprof textutils cvs"
use_gnu_ld=no
use_gnu_as=no
;;
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
- noconfigdirs="$noconfigdirs gdb gdbtest newlib"
+ noconfigdirs="$noconfigdirs gdb gdbtest target-newlib"
else
use_gnu_ld=no
fi
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld libg++ libstdc++ opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libg++ target-libstdc++ opcodes"
;;
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
*-*-lynxos*)
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
esac
# Deconfigure all subdirectories, in case we are changing the
# configuration from one where a subdirectory is supported to one where it
# is not.
-if [ -z "${norecursion}" ]; then
- for i in ${configdirs} ${target_configdirs}; do
+if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
+ for i in ${configdirs} ; do
rm -f $i/Makefile
done
fi
+if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
+ for i in ${target_configdirs} ; do
+ rm -f ${target_subdir}/$i/Makefile
+ done
+fi
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# post-target:
# Record target_configdirs and the configure arguments in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--*norecursion//' \
-e 's/--*cache[a-z-]*=[^ ]*//' \
-e 's/--*cache[a-z-]*[ ][ ]*[^ ]*//'`
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
Makefile > Makefile.tem
rm -f Makefile
mv -f Makefile.tem Makefile
projects / platform / upstream / binutils.git / commitdiff