USB ehci core support
authorMichael Trimarchi <trimarchi@gandalf.sssup.it>
Fri, 28 Nov 2008 12:20:46 +0000 (13:20 +0100)
committerRemy Bohmer <linux@bohmer.net>
Wed, 28 Jan 2009 18:57:27 +0000 (19:57 +0100)
Add USB ehci core support

Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
drivers/usb/Makefile
drivers/usb/usb_ehci.h [new file with mode: 0644]
drivers/usb/usb_ehci_core.c [new file with mode: 0644]
drivers/usb/usb_ehci_core.h [new file with mode: 0644]

index 856f51a..fbc6521 100644 (file)
@@ -28,6 +28,7 @@ LIB   := $(obj)libusb.a
 # core
 COBJS-y += usbdcore.o
 COBJS-$(CONFIG_USB_OHCI_NEW) += usb_ohci.o
+COBJS-$(CONFIG_USB_EHCI) += usb_ehci_core.o
 
 # host
 COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/usb_ehci.h b/drivers/usb/usb_ehci.h
new file mode 100644 (file)
index 0000000..ebffb44
--- /dev/null
@@ -0,0 +1,121 @@
+/*-
+ * Copyright (c) 2007-2008, Juniper Networks, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef USB_EHCI_H
+#define USB_EHCI_H
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+       ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+#define DeviceOutRequest \
+       ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+
+#define InterfaceRequest \
+       ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+#define EndpointRequest \
+       ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+#define EndpointOutRequest \
+       ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+/*
+ * Register Space.
+ */
+struct ehci_hccr {
+       uint8_t cr_caplength;
+       uint16_t cr_hciversion;
+       uint32_t cr_hcsparams;
+       uint32_t cr_hccparams;
+       uint8_t cr_hcsp_portrt[8];
+};
+
+struct ehci_hcor {
+       uint32_t or_usbcmd;
+       uint32_t or_usbsts;
+       uint32_t or_usbintr;
+       uint32_t or_frindex;
+       uint32_t or_ctrldssegment;
+       uint32_t or_periodiclistbase;
+       uint32_t or_asynclistaddr;
+       uint32_t _reserved_[9];
+       uint32_t or_configflag;
+       uint32_t or_portsc[2];
+       uint32_t or_systune;
+};
+
+#define EHCI_PS_WKOC_E         0x00400000      /* RW wake on over current */
+#define EHCI_PS_WKDSCNNT_E     0x00200000      /* RW wake on disconnect */
+#define EHCI_PS_WKCNNT_E       0x00100000      /* RW wake on connect */
+#define EHCI_PS_PTC            0x000f0000      /* RW port test control */
+#define EHCI_PS_PIC            0x0000c000      /* RW port indicator control */
+#define EHCI_PS_PO             0x00002000      /* RW port owner */
+#define EHCI_PS_PP             0x00001000      /* RW,RO port power */
+#define EHCI_PS_LS             0x00000c00      /* RO line status */
+#define EHCI_PS_PR             0x00000100      /* RW port reset */
+#define EHCI_PS_SUSP           0x00000080      /* RW suspend */
+#define EHCI_PS_FPR            0x00000040      /* RW force port resume */
+#define EHCI_PS_OCC            0x00000020      /* RWC over current change */
+#define EHCI_PS_OCA            0x00000010      /* RO over current active */
+#define EHCI_PS_PEC            0x00000008      /* RWC port enable change */
+#define EHCI_PS_PE             0x00000004      /* RW port enable */
+#define EHCI_PS_CSC            0x00000002      /* RWC connect status change */
+#define EHCI_PS_CS             0x00000001      /* RO connect status */
+#define EHCI_PS_CLEAR          (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
+
+#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400)
+
+/*
+ * Schedule Interface Space.
+ *
+ * IMPORTANT: Software must ensure that no interface data structure
+ * reachable by the EHCI host controller spans a 4K page boundary!
+ *
+ * Periodic transfers (i.e. isochronous and interrupt transfers) are
+ * not supported.
+ */
+
+/* Queue Element Transfer Descriptor (qTD). */
+struct qTD {
+       uint32_t qt_next;
+#define        QT_NEXT_TERMINATE       1
+       uint32_t qt_altnext;
+       uint32_t qt_token;
+       uint32_t qt_buffer[5];
+};
+
+/* Queue Head (QH). */
+struct QH {
+       uint32_t qh_link;
+#define        QH_LINK_TERMINATE       1
+#define        QH_LINK_TYPE_ITD        0
+#define        QH_LINK_TYPE_QH         2
+#define        QH_LINK_TYPE_SITD       4
+#define        QH_LINK_TYPE_FSTN       6
+       uint32_t qh_endpt1;
+       uint32_t qh_endpt2;
+       uint32_t qh_curtd;
+       struct qTD qh_overlay;
+};
+
+/* Low level intit functions */
+
+int ehci_hcd_init(void);
+int ehci_hcd_stop(void);
+#endif /* USB_EHCI_H */
diff --git a/drivers/usb/usb_ehci_core.c b/drivers/usb/usb_ehci_core.c
new file mode 100644 (file)
index 0000000..765b5dd
--- /dev/null
@@ -0,0 +1,634 @@
+/*-
+ * Copyright (c) 2007-2008, Juniper Networks, Inc.
+ * Copyright (c) 2008, Excito Elektronik i Skåne AB
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include "usb_ehci.h"
+
+int rootdev;
+struct ehci_hccr *hccr;                /* R/O registers, not need for volatile */
+volatile struct ehci_hcor *hcor;
+
+static uint16_t portreset;
+static struct QH qh_list __attribute__((aligned(32)));
+
+struct usb_device_descriptor device = {
+       sizeof(struct usb_device_descriptor),   /* bLength */
+       1,              /* bDescriptorType: UDESC_DEVICE */
+       0x0002,         /* bcdUSB: v2.0 */
+       9,              /* bDeviceClass: UDCLASS_HUB */
+       0,              /* bDeviceSubClass: UDSUBCLASS_HUB */
+       1,              /* bDeviceProtocol: UDPROTO_HSHUBSTT */
+       64,             /* bMaxPacketSize: 64 bytes */
+       0x0000,         /* idVendor */
+       0x0000,         /* idProduct */
+       0x0001,         /* bcdDevice */
+       1,              /* iManufacturer */
+       2,              /* iProduct */
+       0,              /* iSerialNumber */
+       1               /* bNumConfigurations: 1 */
+};
+
+struct usb_config_descriptor config = {
+       sizeof(struct usb_config_descriptor),
+       2,              /* bDescriptorType: UDESC_CONFIG */
+       sizeof(struct usb_config_descriptor) +
+       sizeof(struct usb_interface_descriptor) +
+       sizeof(struct usb_endpoint_descriptor),
+       0,
+       1,              /* bNumInterface */
+       1,              /* bConfigurationValue */
+       0,              /* iConfiguration */
+       0x40,           /* bmAttributes: UC_SELF_POWER */
+       0               /* bMaxPower */
+};
+
+struct usb_interface_descriptor interface = {
+       sizeof(struct usb_interface_descriptor),        /* bLength */
+       4,              /* bDescriptorType: UDESC_INTERFACE */
+       0,              /* bInterfaceNumber */
+       0,              /* bAlternateSetting */
+       1,              /* bNumEndpoints */
+       9,              /* bInterfaceClass: UICLASS_HUB */
+       0,              /* bInterfaceSubClass: UISUBCLASS_HUB */
+       0,              /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
+       0               /* iInterface */
+};
+
+struct usb_endpoint_descriptor endpoint = {
+sizeof(struct usb_endpoint_descriptor),        /* bLength */
+       5,              /* bDescriptorType: UDESC_ENDPOINT */
+       0x81,           /* bEndpointAddress: UE_DIR_IN | EHCI_INTR_ENDPT */
+       3,              /* bmAttributes: UE_INTERRUPT */
+       8, 0,           /* wMaxPacketSize */
+       255             /* bInterval */
+};
+
+struct usb_hub_descriptor hub = {
+       sizeof(struct usb_hub_descriptor),      /* bDescLength */
+       0x29,           /* bDescriptorType: hub descriptor */
+       2,              /* bNrPorts -- runtime modified */
+       0, 0,           /* wHubCharacteristics */
+       0xff,           /* bPwrOn2PwrGood */
+       {},             /* bHubCntrCurrent */
+       {}              /* at most 7 ports! XXX */
+};
+
+static void *ehci_alloc(size_t sz, size_t align)
+{
+       static struct QH qh __attribute__((aligned(32)));
+       static struct qTD td[3] __attribute__((aligned (32)));
+       static int ntds;
+       void *p;
+
+       switch (sz) {
+       case sizeof(struct QH):
+               p = &qh;
+               ntds = 0;
+               break;
+       case sizeof(struct qTD):
+               if (ntds == 3) {
+                       debug("out of TDs");
+                       return NULL;
+               }
+               p = &td[ntds];
+               ntds++;
+               break;
+       default:
+               debug("unknown allocation size");
+               return NULL;
+       }
+
+       memset(p, sz, 0);
+       return p;
+}
+
+static void ehci_free(void *p, size_t sz)
+{
+}
+
+static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
+{
+       uint32_t addr, delta, next;
+       int idx;
+
+       addr = (uint32_t) buf;
+       idx = 0;
+       while (idx < 5) {
+               td->qt_buffer[idx] = cpu_to_le32(addr);
+               next = (addr + 4096) & ~4095;
+               delta = next - addr;
+               if (delta >= sz)
+                       break;
+               sz -= delta;
+               addr = next;
+               idx++;
+       }
+
+       if (idx == 5) {
+               debug("out of buffer pointers (%u bytes left)", sz);
+               return -1;
+       }
+
+       return 0;
+}
+
+static int
+ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
+                  int length, struct devrequest *req)
+{
+       struct QH *qh;
+       struct qTD *td;
+       volatile struct qTD *vtd;
+       unsigned long ts;
+       uint32_t *tdp;
+       uint32_t endpt, token, usbsts;
+       uint32_t c, toggle;
+
+       debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p", dev, pipe,
+             buffer, length, req);
+       if (req != NULL)
+               debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u",
+                     req->request, req->request,
+                     req->requesttype, req->requesttype,
+                     le16_to_cpu(req->value), le16_to_cpu(req->value),
+                     le16_to_cpu(req->index), le16_to_cpu(req->index));
+
+       qh = ehci_alloc(sizeof(struct QH), 32);
+       if (qh == NULL) {
+               debug("unable to allocate QH");
+               return -1;
+       }
+       qh->qh_link = cpu_to_le32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
+       c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
+            usb_pipeendpoint(pipe) == 0) ? 1 : 0;
+       endpt = (8 << 28) |
+           (c << 27) |
+           (usb_maxpacket(dev, pipe) << 16) |
+           (0 << 15) |
+           (1 << 14) |
+           (usb_pipespeed(pipe) << 12) |
+           (usb_pipeendpoint(pipe) << 8) |
+           (0 << 7) | (usb_pipedevice(pipe) << 0);
+       qh->qh_endpt1 = cpu_to_le32(endpt);
+       endpt = (1 << 30) |
+           (dev->portnr << 23) |
+           (dev->parent->devnum << 16) | (0 << 8) | (0 << 0);
+       qh->qh_endpt2 = cpu_to_le32(endpt);
+       qh->qh_overlay.qt_next = cpu_to_le32(QT_NEXT_TERMINATE);
+       qh->qh_overlay.qt_altnext = cpu_to_le32(QT_NEXT_TERMINATE);
+
+       td = NULL;
+       tdp = &qh->qh_overlay.qt_next;
+
+       toggle =
+           usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+       if (req != NULL) {
+               td = ehci_alloc(sizeof(struct qTD), 32);
+               if (td == NULL) {
+                       debug("unable to allocate SETUP td");
+                       goto fail;
+               }
+               td->qt_next = cpu_to_le32(QT_NEXT_TERMINATE);
+               td->qt_altnext = cpu_to_le32(QT_NEXT_TERMINATE);
+               token = (0 << 31) |
+                   (sizeof(*req) << 16) |
+                   (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0);
+               td->qt_token = cpu_to_le32(token);
+               if (ehci_td_buffer(td, req, sizeof(*req)) != 0) {
+                       debug("unable construct SETUP td");
+                       ehci_free(td, sizeof(*td));
+                       goto fail;
+               }
+               *tdp = cpu_to_le32((uint32_t) td);
+               tdp = &td->qt_next;
+               toggle = 1;
+       }
+
+       if (length > 0 || req == NULL) {
+               td = ehci_alloc(sizeof(struct qTD), 32);
+               if (td == NULL) {
+                       debug("unable to allocate DATA td");
+                       goto fail;
+               }
+               td->qt_next = cpu_to_le32(QT_NEXT_TERMINATE);
+               td->qt_altnext = cpu_to_le32(QT_NEXT_TERMINATE);
+               token = (toggle << 31) |
+                   (length << 16) |
+                   ((req == NULL ? 1 : 0) << 15) |
+                   (0 << 12) |
+                   (3 << 10) |
+                   ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0);
+               td->qt_token = cpu_to_le32(token);
+               if (ehci_td_buffer(td, buffer, length) != 0) {
+                       debug("unable construct DATA td");
+                       ehci_free(td, sizeof(*td));
+                       goto fail;
+               }
+               *tdp = cpu_to_le32((uint32_t) td);
+               tdp = &td->qt_next;
+       }
+
+       if (req != NULL) {
+               td = ehci_alloc(sizeof(struct qTD), 32);
+               if (td == NULL) {
+                       debug("unable to allocate ACK td");
+                       goto fail;
+               }
+               td->qt_next = cpu_to_le32(QT_NEXT_TERMINATE);
+               td->qt_altnext = cpu_to_le32(QT_NEXT_TERMINATE);
+               token = (toggle << 31) |
+                   (0 << 16) |
+                   (1 << 15) |
+                   (0 << 12) |
+                   (3 << 10) |
+                   ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0);
+               td->qt_token = cpu_to_le32(token);
+               *tdp = cpu_to_le32((uint32_t) td);
+               tdp = &td->qt_next;
+       }
+
+       qh_list.qh_link = cpu_to_le32((uint32_t) qh | QH_LINK_TYPE_QH);
+
+       usbsts = le32_to_cpu(hcor->or_usbsts);
+       hcor->or_usbsts = cpu_to_le32(usbsts & 0x3f);
+
+       /* Enable async. schedule. */
+       hcor->or_usbcmd |= cpu_to_le32(0x20);
+       while ((hcor->or_usbsts & cpu_to_le32(0x8000)) == 0)
+               udelay(1);
+
+       /* Wait for TDs to be processed. */
+       ts = get_timer(0);
+       vtd = td;
+       do {
+               token = le32_to_cpu(vtd->qt_token);
+               if (!(token & 0x80))
+                       break;
+       } while (get_timer(ts) < CONFIG_SYS_HZ);
+
+       /* Disable async schedule. */
+       hcor->or_usbcmd &= ~cpu_to_le32(0x20);
+       while ((hcor->or_usbsts & cpu_to_le32(0x8000)) != 0)
+               udelay(1);
+
+       qh_list.qh_link = cpu_to_le32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
+
+       token = le32_to_cpu(qh->qh_overlay.qt_token);
+       if (!(token & 0x80)) {
+               debug("TOKEN=%#x", token);
+               switch (token & 0xfc) {
+               case 0:
+                       toggle = token >> 31;
+                       usb_settoggle(dev, usb_pipeendpoint(pipe),
+                                      usb_pipeout(pipe), toggle);
+                       dev->status = 0;
+                       break;
+               case 0x40:
+                       dev->status = USB_ST_STALLED;
+                       break;
+               case 0xa0:
+               case 0x20:
+                       dev->status = USB_ST_BUF_ERR;
+                       break;
+               case 0x50:
+               case 0x10:
+                       dev->status = USB_ST_BABBLE_DET;
+                       break;
+               default:
+                       dev->status = USB_ST_CRC_ERR;
+                       break;
+               }
+               dev->act_len = length - ((token >> 16) & 0x7fff);
+       } else {
+               dev->act_len = 0;
+               debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x",
+                     dev->devnum, le32_to_cpu(hcor->or_usbsts),
+                     le32_to_cpu(hcor->or_portsc[0]),
+                     le32_to_cpu(hcor->or_portsc[1]));
+       }
+
+       return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
+
+fail:
+       td = (void *)le32_to_cpu(qh->qh_overlay.qt_next);
+       while (td != (void *)QT_NEXT_TERMINATE) {
+               qh->qh_overlay.qt_next = td->qt_next;
+               ehci_free(td, sizeof(*td));
+               td = (void *)le32_to_cpu(qh->qh_overlay.qt_next);
+       }
+       ehci_free(qh, sizeof(*qh));
+       return -1;
+}
+
+static inline int min3(int a, int b, int c)
+{
+
+       if (b < a)
+               a = b;
+       if (c < a)
+               a = c;
+       return a;
+}
+
+ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
+                int length, struct devrequest *req)
+{
+       uint8_t tmpbuf[4];
+       u16 typeReq;
+       void *srcptr;
+       int len, srclen;
+       uint32_t reg;
+
+       srclen = 0;
+       srcptr = NULL;
+
+       debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u",
+             req->request, req->request,
+             req->requesttype, req->requesttype,
+             le16_to_cpu(req->value), le16_to_cpu(req->index));
+
+       typeReq = req->request << 8 | req->requesttype;
+
+       switch (typeReq) {
+       case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+               switch (le16_to_cpu(req->value) >> 8) {
+               case USB_DT_DEVICE:
+                       srcptr = &device;
+                       srclen = sizeof(struct usb_device_descriptor);
+                       break;
+               case USB_DT_CONFIG:
+                       srcptr = &config;
+                       srclen = sizeof(config) +
+                               sizeof(struct usb_interface_descriptor) +
+                               sizeof(struct usb_hub_descriptor);
+                       break;
+               case USB_DT_STRING:
+                       switch (le16_to_cpu(req->value) & 0xff) {
+                       case 0: /* Language */
+                               srcptr = "\4\3\1\0";
+                               srclen = 4;
+                               break;
+                       case 1: /* Vendor */
+                               srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
+                               srclen = 14;
+                               break;
+                       case 2: /* Product */
+                               srcptr = "\52\3E\0H\0C\0I\0 "
+                                        "\0H\0o\0s\0t\0 "
+                                        "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
+                               srclen = 42;
+                               break;
+                       default:
+                               goto unknown;
+                       }
+                       break;
+               default:
+                       debug("unknown value %x", le16_to_cpu(req->value));
+                       goto unknown;
+               }
+               break;
+       case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
+               switch (le16_to_cpu(req->value) >> 8) {
+               case USB_DT_HUB:
+                       srcptr = &hub;
+                       srclen = sizeof(hub);
+                       break;
+               default:
+                       debug("unknown value %x", le16_to_cpu(req->value));
+                       goto unknown;
+               }
+               break;
+       case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
+               rootdev = le16_to_cpu(req->value);
+               break;
+       case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+               /* Nothing to do */
+               break;
+       case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
+               tmpbuf[0] = 1;  /* USB_STATUS_SELFPOWERED */
+               tmpbuf[1] = 0;
+               srcptr = tmpbuf;
+               srclen = 2;
+               break;
+       case DeviceRequest | USB_REQ_GET_STATUS:
+               memset(tmpbuf, 0, 4);
+               reg = le32_to_cpu(hcor->or_portsc[le16_to_cpu(req->index)
+                                  - 1]);
+               if (reg & EHCI_PS_CS)
+                       tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
+               if (reg & EHCI_PS_PE)
+                       tmpbuf[0] |= USB_PORT_STAT_ENABLE;
+               if (reg & EHCI_PS_SUSP)
+                       tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
+               if (reg & EHCI_PS_OCA)
+                       tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
+               if (reg & EHCI_PS_PR)
+                       tmpbuf[0] |= USB_PORT_STAT_RESET;
+               if (reg & EHCI_PS_PP)
+                       tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
+               tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
+
+               if (reg & EHCI_PS_CSC)
+                       tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
+               if (reg & EHCI_PS_PEC)
+                       tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
+               if (reg & EHCI_PS_OCC)
+                       tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
+               if (portreset & (1 << le16_to_cpu(req->index)))
+                       tmpbuf[2] |= USB_PORT_STAT_C_RESET;
+               srcptr = tmpbuf;
+               srclen = 4;
+               break;
+       case DeviceOutRequest | USB_REQ_SET_FEATURE:
+               reg = le32_to_cpu(hcor->or_portsc[le16_to_cpu(req->index) - 1]);
+               reg &= ~EHCI_PS_CLEAR;
+               switch (le16_to_cpu(req->value)) {
+               case USB_PORT_FEAT_POWER:
+                       reg |= EHCI_PS_PP;
+                       break;
+               case USB_PORT_FEAT_RESET:
+                       if (EHCI_PS_IS_LOWSPEED(reg)) {
+                               /* Low speed device, give up ownership. */
+                               reg |= EHCI_PS_PO;
+                               break;
+                       }
+                       /* Start reset sequence. */
+                       reg &= ~EHCI_PS_PE;
+                       reg |= EHCI_PS_PR;
+                       hcor->or_portsc[le16_to_cpu(req->index) - 1] =
+                           cpu_to_le32(reg);
+                       /* Wait for reset to complete. */
+                       udelay(500000);
+                       /* Terminate reset sequence. */
+                       reg &= ~EHCI_PS_PR;
+                       /* TODO: is it only fsl chip that requires this
+                        * manual setting of port enable?
+                        */
+                       reg |= EHCI_PS_PE;
+                       hcor->or_portsc[le16_to_cpu(req->index) - 1] =
+                           cpu_to_le32(reg);
+                       /* Wait for HC to complete reset. */
+                       udelay(2000);
+                       reg =
+                           le32_to_cpu(hcor->or_portsc[le16_to_cpu(req->index)
+                                                       - 1]);
+                       reg &= ~EHCI_PS_CLEAR;
+                       if ((reg & EHCI_PS_PE) == 0) {
+                               /* Not a high speed device, give up
+                                * ownership. */
+                               reg |= EHCI_PS_PO;
+                               break;
+                       }
+                       portreset |= 1 << le16_to_cpu(req->index);
+                       break;
+               default:
+                       debug("unknown feature %x", le16_to_cpu(req->value));
+                       goto unknown;
+               }
+               hcor->or_portsc[le16_to_cpu(req->index) - 1] =
+                                       cpu_to_le32(reg);
+               break;
+       case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+               reg = le32_to_cpu(hcor->or_portsc[le16_to_cpu(req->index) - 1]);
+               reg &= ~EHCI_PS_CLEAR;
+               switch (le16_to_cpu(req->value)) {
+               case USB_PORT_FEAT_ENABLE:
+                       reg &= ~EHCI_PS_PE;
+                       break;
+               case USB_PORT_FEAT_C_CONNECTION:
+                       reg |= EHCI_PS_CSC;
+                       break;
+               case USB_PORT_FEAT_C_RESET:
+                       portreset &= ~(1 << le16_to_cpu(req->index));
+                       break;
+               default:
+                       debug("unknown feature %x", le16_to_cpu(req->value));
+                       goto unknown;
+               }
+               hcor->or_portsc[le16_to_cpu(req->index) - 1] =
+                                       cpu_to_le32(reg);
+               break;
+       default:
+               debug("Unknown request");
+               goto unknown;
+       }
+
+       len = min3(srclen, le16_to_cpu(req->length), length);
+       if (srcptr != NULL && len > 0)
+               memcpy(buffer, srcptr, len);
+       dev->act_len = len;
+       dev->status = 0;
+       return 0;
+
+unknown:
+       debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x",
+             req->requesttype, req->request, le16_to_cpu(req->value),
+             le16_to_cpu(req->index), le16_to_cpu(req->length));
+
+       dev->act_len = 0;
+       dev->status = USB_ST_STALLED;
+       return -1;
+}
+
+int usb_lowlevel_stop(void)
+{
+       return ehci_hcd_stop();
+}
+
+int usb_lowlevel_init(void)
+{
+       uint32_t reg;
+
+       if (ehci_hcd_init() != 0)
+               return -1;
+
+       /* Set head of reclaim list */
+       memset(&qh_list, 0, sizeof(qh_list));
+       qh_list.qh_link = cpu_to_le32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
+       qh_list.qh_endpt1 = cpu_to_le32((1 << 15) | (USB_SPEED_HIGH << 12));
+       qh_list.qh_curtd = cpu_to_le32(QT_NEXT_TERMINATE);
+       qh_list.qh_overlay.qt_next = cpu_to_le32(QT_NEXT_TERMINATE);
+       qh_list.qh_overlay.qt_altnext = cpu_to_le32(QT_NEXT_TERMINATE);
+       qh_list.qh_overlay.qt_token = cpu_to_le32(0x40);
+
+       /* Set async. queue head pointer. */
+       hcor->or_asynclistaddr = cpu_to_le32((uint32_t)&qh_list);
+
+       reg = le32_to_cpu(hccr->cr_hcsparams);
+       hub.bNbrPorts = reg & 0xf;
+       if (reg & 0x10000)      /* Port Indicators */
+               hub.wHubCharacteristics |= 0x80;
+       if (reg & 0x10)         /* Port Power Control */
+               hub.wHubCharacteristics |= 0x01;
+
+       /* take control over the ports */
+       hcor->or_configflag |= cpu_to_le32(1);
+
+       /* Start the host controller. */
+       hcor->or_usbcmd |= cpu_to_le32(1);
+
+       rootdev = 0;
+
+       return 0;
+}
+
+int
+submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+               int length)
+{
+
+       if (usb_pipetype(pipe) != PIPE_BULK) {
+               debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
+               return -1;
+       }
+       return ehci_submit_async(dev, pipe, buffer, length, NULL);
+}
+
+int
+submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+                  int length, struct devrequest *setup)
+{
+
+       if (usb_pipetype(pipe) != PIPE_CONTROL) {
+               debug("non-control pipe (type=%lu)", usb_pipetype(pipe));
+               return -1;
+       }
+
+       if (usb_pipedevice(pipe) == rootdev) {
+               if (rootdev == 0)
+                       dev->speed = USB_SPEED_HIGH;
+               return ehci_submit_root(dev, pipe, buffer, length, setup);
+       }
+       return ehci_submit_async(dev, pipe, buffer, length, setup);
+}
+
+int
+submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+              int length, int interval)
+{
+
+       debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
+             dev, pipe, buffer, length, interval);
+       return -1;
+}
diff --git a/drivers/usb/usb_ehci_core.h b/drivers/usb/usb_ehci_core.h
new file mode 100644 (file)
index 0000000..88e91b9
--- /dev/null
@@ -0,0 +1,29 @@
+/*-
+ * Copyright (c) 2007-2008, Juniper Networks, Inc.
+ * Copyright (c) 2008, Excito Elektronik i Skåne AB
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef USB_EHCI_CORE_H
+#define USB_EHCI_CORE_H
+
+extern int rootdev;
+extern struct ehci_hccr *hccr;
+extern volatile struct ehci_hcor *hcor;
+
+#endif