ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent

On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index e8325fd..e6a4e27 100644 (file)
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -22,6 +22,7 @@
                compatible = "fixed-clock";
                #clock-cells = <0>;
                clock-frequency = <50000000>;
+               clock-output-names = "enet_ref_pad";
        };
 
        i2c2-mux {
@@ -191,6 +192,13 @@
        status = "okay";
 };
 
+&clks {
+       clocks = <&clock_ksz8081>;
+       clock-names = "enet_ref_pad";
+       assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+       assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &ecspi1 {
        cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
        pinctrl-names = "default";
@@ -208,10 +216,6 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rmii";
-       clocks = <&clks IMX6QDL_CLK_ENET>,
-                <&clks IMX6QDL_CLK_ENET>,
-                <&clock_ksz8081>;
-       clock-names = "ipg", "ahb", "ptp";
        status = "okay";
 
        mdio {