ARM: dts: omap3-beagle-xm: Add USB Host support
authorRoger Quadros <rogerq@ti.com>
Tue, 24 Sep 2013 08:53:55 +0000 (11:53 +0300)
committerBenoit Cousson <bcousson@baylibre.com>
Fri, 11 Oct 2013 19:06:35 +0000 (21:06 +0200)
Provide RESET GPIO and Power regulator for the USB PHY,
the USB Host port mode and the PHY device for the controller.
Also provide pin multiplexer information for USB host pins.

We also relocate omap3_pmx_core pin definations so that they
are close to omap3_pmx_wkup pin definations.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
arch/arm/boot/dts/omap3-beagle-xm.dts

index 0c514dc..0f7cfc5 100644 (file)
                };
 
        };
+
+       /* HS USB Port 2 Power */
+       hsusb2_power: hsusb2_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb2_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&twl_gpio 18 0>;        /* GPIO LEDA */
+               startup-delay-us = <70000>;
+       };
+
+       /* HS USB Host PHY on PORT 2 */
+       hsusb2_phy: hsusb2_phy {
+               compatible = "usb-nop-xceiv";
+               reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+               vcc-supply = <&hsusb2_power>;
+       };
 };
 
 &omap3_pmx_wkup {
        };
 };
 
+&omap3_pmx_core {
+       pinctrl-names = "default";
+       pinctrl-0 = <
+                       &hsusbb2_pins
+       >;
+
+       uart3_pins: pinmux_uart3_pins {
+               pinctrl-single,pins = <
+                       0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                       0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+               >;
+       };
+
+       hsusbb2_pins: pinmux_hsusbb2_pins {
+               pinctrl-single,pins = <
+                       0x5c0 (PIN_OUTPUT | MUX_MODE3)          /* etk_d10.hsusb2_clk */
+                       0x5c2 (PIN_OUTPUT | MUX_MODE3)          /* etk_d11.hsusb2_stp */
+                       0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* etk_d12.hsusb2_dir */
+                       0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* etk_d13.hsusb2_nxt */
+                       0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* etk_d14.hsusb2_data0 */
+                       0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* etk_d15.hsusb2_data1 */
+                       0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi1_cs3.hsusb2_data2 */
+                       0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi2_clk.hsusb2_data7 */
+                       0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi2_simo.hsusb2_data4 */
+                       0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi2_somi.hsusb2_data5 */
+                       0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi2_cs0.hsusb2_data6 */
+                       0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcspi2_cs1.hsusb2_data3 */
+               >;
+       };
+};
+
 &i2c1 {
        clock-frequency = <2600000>;
 
        power = <50>;
 };
 
-&omap3_pmx_core {
-       uart3_pins: pinmux_uart3_pins {
-               pinctrl-single,pins = <
-                       0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                       0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-               >;
-       };
-};
-
 &uart3 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart3_pins>;
        pinctrl-names = "default";
        pinctrl-0 = <&gpio1_pins>;
 };
+
+&usbhshost {
+       port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+       phys = <0 &hsusb2_phy>;
+};