i.MX51: handle IRQ for gpio 16..31

The i.MX51 generates 2 IRQ for each GPIO bank : one for gpio 0 to 15
and one for gpio 16 to 31.
Actually only the lower IRQ is registered so register the second one.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index aafa61c..1920ff4 100644 (file)
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -250,24 +250,28 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
                .chip.label = "gpio-0",
                .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
                .irq = MX51_MXC_INT_GPIO1_LOW,
+               .irq_high = MX51_MXC_INT_GPIO1_HIGH,
                .virtual_irq_start = MXC_GPIO_IRQ_START
        },
        {
                .chip.label = "gpio-1",
                .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
                .irq = MX51_MXC_INT_GPIO2_LOW,
+               .irq_high = MX51_MXC_INT_GPIO2_HIGH,
                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
        },
        {
                .chip.label = "gpio-2",
                .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
                .irq = MX51_MXC_INT_GPIO3_LOW,
+               .irq_high = MX51_MXC_INT_GPIO3_HIGH,
                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
        },
        {
                .chip.label = "gpio-3",
                .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
                .irq = MX51_MXC_INT_GPIO4_LOW,
+               .irq_high = MX51_MXC_INT_GPIO4_HIGH,
                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
        },
 };

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 71437c6..11dc061 100644 (file)
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -292,6 +292,12 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
                        /* setup one handler for each entry */
                        set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
                        set_irq_data(port[i].irq, &port[i]);
+                       if (port[i].irq_high) {
+                               /* setup handler for GPIO 16 to 31 */
+                               set_irq_chained_handler(port[i].irq_high,
+                                               mx3_gpio_irq_handler);
+                               set_irq_data(port[i].irq_high, &port[i]);
+                       }
                }
        }
 

diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 894d2f8..9541ecb 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -33,6 +33,7 @@
 struct mxc_gpio_port {
        void __iomem *base;
        int irq;
+       int irq_high;
        int virtual_irq_start;
        struct gpio_chip chip;
        u32 both_edges;