board: imx: address dd usage in README

When using cygwin64 "dd (coreutils) 8.26 Packaged by Cygwin (8.26-2)",
the last not 512bytes aligned data wat cut off and not burned into SD
card.

Saying the flash.bin size is 1085608 bytes, not 512bytes aligned. It only
burned 1085440 bytes, the leaving 168 bytes were not burnned and cause
boot issue.

So update README dd command to add "conv=notrunc"

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/freescale/imx8mm_evk/README b/board/freescale/imx8mm_evk/README
index fa3f079..3307711 100644 (file)
--- a/board/freescale/imx8mm_evk/README
+++ b/board/freescale/imx8mm_evk/README
@@ -30,7 +30,7 @@ $ export ATF_LOAD_ADDR=0x920000
 $ make flash.bin
 
 Burn the flash.bin to MicroSD card offset 33KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
 
 Boot
 ====

diff --git a/board/freescale/imx8mn_evk/README b/board/freescale/imx8mn_evk/README
index ff3d15c..ec007af 100644 (file)
--- a/board/freescale/imx8mn_evk/README
+++ b/board/freescale/imx8mn_evk/README
@@ -30,7 +30,7 @@ $ export ATF_LOAD_ADDR=0x960000
 $ make flash.bin
 
 Burn the flash.bin to MicroSD card offset 32KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
 
 Boot
 ====

diff --git a/board/freescale/imx8mp_evk/README b/board/freescale/imx8mp_evk/README
index 7dd3a93..3c64979 100644 (file)
--- a/board/freescale/imx8mp_evk/README
+++ b/board/freescale/imx8mp_evk/README
@@ -33,7 +33,7 @@ $ export ATF_LOAD_ADDR=0x960000
 $ make flash.bin
 
 Burn the flash.bin to the MicroSD card at offset 32KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32; sync
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
 
 Boot
 ====

diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index 859f852..2689459 100644 (file)
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -30,7 +30,7 @@ $ make imx8mq_evk_defconfig
 $ make flash.bin
 
 Burn the flash.bin to MicroSD card offset 33KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
 
 Boot
 ====

diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
index 6e4eb59..6f99d0e 100644 (file)
--- a/board/freescale/imx8qxp_mek/README
+++ b/board/freescale/imx8qxp_mek/README
@@ -43,7 +43,7 @@ Flash the binary into the SD card
 
 Burn the flash.bin binary to SD card offset 32KB:
 
-$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
+$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
 
 Boot
 ====

diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README
index abee7ca..9bc5bc0 100644 (file)
--- a/board/freescale/imxrt1020-evk/README
+++ b/board/freescale/imxrt1020-evk/README
@@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img.
 
 - Flash the SPL image into the micro SD card:
 
-sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
+sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
 
 - Flash the u-boot.img image into the micro SD card:
 
-sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
+sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
 
 - Jumper settings:
 

diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README
index a7e68fa..f321300 100644 (file)
--- a/board/freescale/imxrt1050-evk/README
+++ b/board/freescale/imxrt1050-evk/README
@@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img.
 
 - Flash the SPL image into the micro SD card:
 
-sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
+sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
 
 - Flash the u-boot.img image into the micro SD card:
 
-sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
+sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
 
 - Jumper settings:
 

diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README
index 4c0fda1..710026a 100644 (file)
--- a/board/freescale/mx6sabreauto/README
+++ b/board/freescale/mx6sabreauto/README
@@ -13,11 +13,11 @@ This will generate the SPL and u-boot-dtb.img binaries.
 
 - Flash the SPL binary into the SD card:
 
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
+$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
 
 - Flash the u-boot-dtb.img binary into the SD card:
 
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
 
 Booting via Falcon mode
 -----------------------
@@ -36,11 +36,11 @@ This will generate the SPL image called SPL and the u-boot-dtb.img.
 
 - Flash the SPL image into the SD card:
 
-$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
+$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
 
 - Flash the u-boot-dtb.img image into the SD card:
 
-$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 conv=notrunc && sync
 
 Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
 

diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README
index 4ea4454..974b0be 100644 (file)
--- a/board/freescale/mx6sabresd/README
+++ b/board/freescale/mx6sabresd/README
@@ -25,11 +25,11 @@ This will generate the SPL and u-boot-dtb.img binaries.
 
 - Flash the SPL binary into the SD card:
 
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
+$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
 
 - Flash the u-boot-dtb.img binary into the SD card:
 
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
 
 
 2. Booting from eMMC
@@ -53,8 +53,8 @@ Mount the eMMC in the host PC:
 
 - Flash SPL and u-boot-dtb.img binaries into the eMMC:
 
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
 
 Set SW6 to eMMC 8-bit boot: 11010110
 
@@ -69,11 +69,11 @@ This will generate the SPL image called SPL and the u-boot-dtb.img.
 
 - Flash the SPL image into the SD card:
 
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
+$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none conv=notrunc && sync
 
 - Flash the u-boot-dtb.img image into the SD card:
 
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none conv=notrunc && sync
 
 Create a partition for root file system and extract it there:
 

diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README
index e101abe..70eb86e 100644 (file)
--- a/board/freescale/mx6ul_14x14_evk/README
+++ b/board/freescale/mx6ul_14x14_evk/README
@@ -14,11 +14,11 @@ This will generate the SPL image called SPL and the u-boot.img.
 
 - Flash the SPL image into the micro SD card:
 
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1 conv=notrunc; sync
 
 - Flash the u-boot.img image into the micro SD card:
 
-sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69 conv=notrunc; sync
 
 - Jumper settings:
 

diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README
index d5c8770..47a35f6 100644 (file)
--- a/board/freescale/mx6ullevk/README
+++ b/board/freescale/mx6ullevk/README
@@ -15,7 +15,7 @@ This generates the u-boot-dtb.imx image in the current directory.
 
 - Flash the u-boot-dtb.imx image into the micro SD card:
 
-$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync
+$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
 
 - Jumper settings: