+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8377E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
- model = "fsl,mpc8377emds";
- compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8377@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; // 512MB at 0
- };
-
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
- interrupt-parent = <&ipic>;
-
- // booting from NOR flash
- ranges = <0 0x0 0xfe000000 0x02000000
- 1 0x0 0xf8000000 0x00008000
- 3 0x0 0xe0600000 0x00008000>;
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- fs@100000 {
- reg = <0x100000 0x800000>;
- };
-
- kernel@1d00000 {
- reg = <0x1d00000 0x200000>;
- };
-
- dtb@1f00000 {
- reg = <0x1f00000 0x100000>;
- };
- };
-
- bcsr@1,0 {
- reg = <1 0x0 0x8000>;
- compatible = "fsl,mpc837xmds-bcsr";
- };
-
- nand@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8377-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <3 0x0 0x8000>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- kernel@100000 {
- reg = <0x100000 0x300000>;
- };
-
- fs@400000 {
- reg = <0x400000 0x1c00000>;
- };
- };
- };
-
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00000200>;
- bus-frequency = <0>;
-
- wdt@200 {
- compatible = "mpc83xx_wdt";
- reg = <0x200 0x100>;
- };
-
- sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x0c000000>;
- ranges;
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- sdhci,wp-inverted;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <15 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
- };
-
- spi@7000 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x7000 0x1000>;
- interrupts = <16 0x8>;
- interrupt-parent = <&ipic>;
- mode = "cpu";
- };
-
- usb@23000 {
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
- dr_mode = "host";
- phy_type = "ulpi";
- sleep = <&pmc 0x00c00000>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 0x8 33 0x8 34 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy2>;
- sleep = <&pmc 0xc0000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- };
-
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 0x8 36 0x8 37 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy3>;
- sleep = <&pmc 0x30000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <9 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <10 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- dma@82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <0x47 8>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <0x47 8>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <0x47 8>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <0x47 8>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <0x47 8>;
- };
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x03000000>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- interrupts = <44 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x000000c0>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- interrupts = <45 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x00000030>;
- };
-
- /* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
- */
- ipic: pic@700 {
- compatible = "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x700 0x100>;
- };
-
- pmc: power@b00 {
- compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
- reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 0x8800 0x0 0x0 0x1 &ipic 20 0x8
- 0x8800 0x0 0x0 0x2 &ipic 21 0x8
- 0x8800 0x0 0x0 0x3 &ipic 22 0x8
- 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x12 */
- 0x9000 0x0 0x0 0x1 &ipic 22 0x8
- 0x9000 0x0 0x0 0x2 &ipic 23 0x8
- 0x9000 0x0 0x0 0x3 &ipic 20 0x8
- 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x13 */
- 0x9800 0x0 0x0 0x1 &ipic 23 0x8
- 0x9800 0x0 0x0 0x2 &ipic 20 0x8
- 0x9800 0x0 0x0 0x3 &ipic 21 0x8
- 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &ipic 20 0x8
- 0xa800 0x0 0x0 0x2 &ipic 21 0x8
- 0xa800 0x0 0x0 0x3 &ipic 22 0x8
- 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x16 */
- 0xb000 0x0 0x0 0x1 &ipic 23 0x8
- 0xb000 0x0 0x0 0x2 &ipic 20 0x8
- 0xb000 0x0 0x0 0x3 &ipic 21 0x8
- 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x17 */
- 0xb800 0x0 0x0 0x1 &ipic 22 0x8
- 0xb800 0x0 0x0 0x2 &ipic 23 0x8
- 0xb800 0x0 0x0 0x3 &ipic 20 0x8
- 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x18 */
- 0xc000 0x0 0x0 0x1 &ipic 21 0x8
- 0xc000 0x0 0x0 0x2 &ipic 22 0x8
- 0xc000 0x0 0x0 0x3 &ipic 23 0x8
- 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
- sleep = <&pmc 0x00010000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
- pci1: pcie@e0009000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
- reg = <0xe0009000 0x00001000>;
- ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
- 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 1 8
- 0 0 0 2 &ipic 1 8
- 0 0 0 3 &ipic 1 8
- 0 0 0 4 &ipic 1 8>;
- sleep = <&pmc 0x00300000>;
- clock-frequency = <0>;
-
- pcie@0 {
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- reg = <0 0 0 0 0>;
- ranges = <0x02000000 0 0xa8000000
- 0x02000000 0 0xa8000000
- 0 0x10000000
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00800000>;
- };
- };
-
- pci2: pcie@e000a000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
- reg = <0xe000a000 0x00001000>;
- ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
- 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 2 8
- 0 0 0 2 &ipic 2 8
- 0 0 0 3 &ipic 2 8
- 0 0 0 4 &ipic 2 8>;
- sleep = <&pmc 0x000c0000>;
- clock-frequency = <0>;
-
- pcie@0 {
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- reg = <0 0 0 0 0>;
- ranges = <0x02000000 0 0xc8000000
- 0x02000000 0 0xc8000000
- 0 0x10000000
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00800000>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8378E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
- model = "fsl,mpc8378emds";
- compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8378@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; // 512MB at 0
- };
-
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
- interrupt-parent = <&ipic>;
-
- // booting from NOR flash
- ranges = <0 0x0 0xfe000000 0x02000000
- 1 0x0 0xf8000000 0x00008000
- 3 0x0 0xe0600000 0x00008000>;
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- fs@100000 {
- reg = <0x100000 0x800000>;
- };
-
- kernel@1d00000 {
- reg = <0x1d00000 0x200000>;
- };
-
- dtb@1f00000 {
- reg = <0x1f00000 0x100000>;
- };
- };
-
- bcsr@1,0 {
- reg = <1 0x0 0x8000>;
- compatible = "fsl,mpc837xmds-bcsr";
- };
-
- nand@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8378-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <3 0x0 0x8000>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- kernel@100000 {
- reg = <0x100000 0x300000>;
- };
-
- fs@400000 {
- reg = <0x400000 0x1c00000>;
- };
- };
- };
-
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00000200>;
- bus-frequency = <0>;
-
- wdt@200 {
- compatible = "mpc83xx_wdt";
- reg = <0x200 0x100>;
- };
-
- sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x0c000000>;
- ranges;
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- sdhci,wp-inverted;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <15 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
- };
-
- spi@7000 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x7000 0x1000>;
- interrupts = <16 0x8>;
- interrupt-parent = <&ipic>;
- mode = "cpu";
- };
-
- dma@82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
- usb@23000 {
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
- dr_mode = "host";
- phy_type = "ulpi";
- sleep = <&pmc 0x00c00000>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 0x8 33 0x8 34 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy2>;
- sleep = <&pmc 0xc0000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- };
-
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 0x8 36 0x8 37 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy3>;
- sleep = <&pmc 0x30000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <9 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <10 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x03000000>;
- };
-
- /* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
- */
- ipic: pic@700 {
- compatible = "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x700 0x100>;
- };
-
- pmc: power@b00 {
- compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
- reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 0x8800 0x0 0x0 0x1 &ipic 20 0x8
- 0x8800 0x0 0x0 0x2 &ipic 21 0x8
- 0x8800 0x0 0x0 0x3 &ipic 22 0x8
- 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x12 */
- 0x9000 0x0 0x0 0x1 &ipic 22 0x8
- 0x9000 0x0 0x0 0x2 &ipic 23 0x8
- 0x9000 0x0 0x0 0x3 &ipic 20 0x8
- 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x13 */
- 0x9800 0x0 0x0 0x1 &ipic 23 0x8
- 0x9800 0x0 0x0 0x2 &ipic 20 0x8
- 0x9800 0x0 0x0 0x3 &ipic 21 0x8
- 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &ipic 20 0x8
- 0xa800 0x0 0x0 0x2 &ipic 21 0x8
- 0xa800 0x0 0x0 0x3 &ipic 22 0x8
- 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x16 */
- 0xb000 0x0 0x0 0x1 &ipic 23 0x8
- 0xb000 0x0 0x0 0x2 &ipic 20 0x8
- 0xb000 0x0 0x0 0x3 &ipic 21 0x8
- 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x17 */
- 0xb800 0x0 0x0 0x1 &ipic 22 0x8
- 0xb800 0x0 0x0 0x2 &ipic 23 0x8
- 0xb800 0x0 0x0 0x3 &ipic 20 0x8
- 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x18 */
- 0xc000 0x0 0x0 0x1 &ipic 21 0x8
- 0xc000 0x0 0x0 0x2 &ipic 22 0x8
- 0xc000 0x0 0x0 0x3 &ipic 23 0x8
- 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
- clock-frequency = <0>;
- sleep = <&pmc 0x00010000>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
- pci1: pcie@e0009000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
- reg = <0xe0009000 0x00001000>;
- ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
- 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 1 8
- 0 0 0 2 &ipic 1 8
- 0 0 0 3 &ipic 1 8
- 0 0 0 4 &ipic 1 8>;
- sleep = <&pmc 0x00300000>;
- clock-frequency = <0>;
-
- pcie@0 {
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- reg = <0 0 0 0 0>;
- ranges = <0x02000000 0 0xa8000000
- 0x02000000 0 0xa8000000
- 0 0x10000000
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00800000>;
- };
- };
-
- pci2: pcie@e000a000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
- reg = <0xe000a000 0x00001000>;
- ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
- 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 2 8
- 0 0 0 2 &ipic 2 8
- 0 0 0 3 &ipic 2 8
- 0 0 0 4 &ipic 2 8>;
- sleep = <&pmc 0x000c0000>;
- clock-frequency = <0>;
-
- pcie@0 {
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- reg = <0 0 0 0 0>;
- ranges = <0x02000000 0 0xc8000000
- 0x02000000 0 0xc8000000
- 0 0x10000000
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00800000>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8379E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
- model = "fsl,mpc8379emds";
- compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8379@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; // 512MB at 0
- };
-
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
- interrupt-parent = <&ipic>;
-
- // booting from NOR flash
- ranges = <0 0x0 0xfe000000 0x02000000
- 1 0x0 0xf8000000 0x00008000
- 3 0x0 0xe0600000 0x00008000>;
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- fs@100000 {
- reg = <0x100000 0x800000>;
- };
-
- kernel@1d00000 {
- reg = <0x1d00000 0x200000>;
- };
-
- dtb@1f00000 {
- reg = <0x1f00000 0x100000>;
- };
- };
-
- bcsr@1,0 {
- reg = <1 0x0 0x8000>;
- compatible = "fsl,mpc837xmds-bcsr";
- };
-
- nand@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8379-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <3 0x0 0x8000>;
-
- u-boot@0 {
- reg = <0x0 0x100000>;
- read-only;
- };
-
- kernel@100000 {
- reg = <0x100000 0x300000>;
- };
-
- fs@400000 {
- reg = <0x400000 0x1c00000>;
- };
- };
- };
-
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00000200>;
- bus-frequency = <0>;
-
- wdt@200 {
- compatible = "mpc83xx_wdt";
- reg = <0x200 0x100>;
- };
-
- sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x0c000000>;
- ranges;
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- sdhci,wp-inverted;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <15 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
- };
-
- spi@7000 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x7000 0x1000>;
- interrupts = <16 0x8>;
- interrupt-parent = <&ipic>;
- mode = "cpu";
- };
-
- dma@82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
- usb@23000 {
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
- dr_mode = "host";
- phy_type = "ulpi";
- sleep = <&pmc 0x00c00000>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 0x8 33 0x8 34 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy2>;
- sleep = <&pmc 0xc0000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- };
-
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 0x8 36 0x8 37 0x8>;
- phy-connection-type = "mii";
- interrupt-parent = <&ipic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy3>;
- sleep = <&pmc 0x30000000>;
- fsl,magic-packet;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <9 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <10 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x03000000>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- interrupts = <44 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x000000c0>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- interrupts = <45 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x00000030>;
- };
-
- sata@1a000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x1a000 0x1000>;
- interrupts = <46 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x0000000c>;
- };
-
- sata@1b000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x1b000 0x1000>;
- interrupts = <47 0x8>;
- interrupt-parent = <&ipic>;
- sleep = <&pmc 0x00000003>;
- };
-
- /* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
- */
- ipic: pic@700 {
- compatible = "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x700 0x100>;
- };
-
- pmc: power@b00 {
- compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
- reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 0x8>;
- interrupt-parent = <&ipic>;
- };
- };
-
- pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 0x8800 0x0 0x0 0x1 &ipic 20 0x8
- 0x8800 0x0 0x0 0x2 &ipic 21 0x8
- 0x8800 0x0 0x0 0x3 &ipic 22 0x8
- 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x12 */
- 0x9000 0x0 0x0 0x1 &ipic 22 0x8
- 0x9000 0x0 0x0 0x2 &ipic 23 0x8
- 0x9000 0x0 0x0 0x3 &ipic 20 0x8
- 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x13 */
- 0x9800 0x0 0x0 0x1 &ipic 23 0x8
- 0x9800 0x0 0x0 0x2 &ipic 20 0x8
- 0x9800 0x0 0x0 0x3 &ipic 21 0x8
- 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &ipic 20 0x8
- 0xa800 0x0 0x0 0x2 &ipic 21 0x8
- 0xa800 0x0 0x0 0x3 &ipic 22 0x8
- 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x16 */
- 0xb000 0x0 0x0 0x1 &ipic 23 0x8
- 0xb000 0x0 0x0 0x2 &ipic 20 0x8
- 0xb000 0x0 0x0 0x3 &ipic 21 0x8
- 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x17 */
- 0xb800 0x0 0x0 0x1 &ipic 22 0x8
- 0xb800 0x0 0x0 0x2 &ipic 23 0x8
- 0xb800 0x0 0x0 0x3 &ipic 20 0x8
- 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x18 */
- 0xc000 0x0 0x0 0x1 &ipic 21 0x8
- 0xc000 0x0 0x0 0x2 &ipic 22 0x8
- 0xc000 0x0 0x0 0x3 &ipic 23 0x8
- 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
- sleep = <&pmc 0x00010000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-};
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_MPC837x_MDS=y
-CONFIG_GEN_RTC=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
CONFIG_MPC832x_RDB=y
CONFIG_MPC834x_ITX=y
CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
CONFIG_MPC837x_RDB=y
CONFIG_ASP834x=y
CONFIG_QE_GPIO=y
CONFIG_MPC832x_RDB=y
CONFIG_MPC834x_ITX=y
CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
CONFIG_MPC837x_RDB=y
CONFIG_ASP834x=y
CONFIG_PPC_86xx=y
This option enables support for the MPC836x RDK Processor Board,
also known as ZOOM PowerQUICC Kit.
-config MPC837x_MDS
- bool "Freescale MPC837x MDS"
- select DEFAULT_UIMAGE
- select PPC_MPC837x
- help
- This option enables support for the MPC837x MDS Processor Board.
-
config MPC837x_RDB
bool "Freescale MPC837x RDB/WLAN"
select DEFAULT_UIMAGE
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
-obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
obj-$(CONFIG_ASP834x) += asp834x.o
obj-$(CONFIG_KMETER1) += km83xx.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/powerpc/platforms/83xx/mpc837x_mds.c
- *
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * MPC837x MDS board specific routines
- */
-
-#include <linux/pci.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/ipic.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc83xx.h"
-
-#define BCSR12_USB_SER_MASK 0x8a
-#define BCSR12_USB_SER_PIN 0x80
-#define BCSR12_USB_SER_DEVICE 0x02
-
-static int __init mpc837xmds_usb_cfg(void)
-{
- struct device_node *np;
- const void *phy_type, *mode;
- void __iomem *bcsr_regs = NULL;
- u8 bcsr12;
- int ret;
-
- ret = mpc837x_usb_cfg();
- if (ret)
- return ret;
- /* Map BCSR area */
- np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
- if (np) {
- bcsr_regs = of_iomap(np, 0);
- of_node_put(np);
- }
- if (!bcsr_regs)
- return -1;
-
- np = of_find_node_by_name(NULL, "usb");
- if (!np) {
- ret = -ENODEV;
- goto out;
- }
- phy_type = of_get_property(np, "phy_type", NULL);
- if (phy_type && !strcmp(phy_type, "ulpi")) {
- clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
- } else if (phy_type && !strcmp(phy_type, "serial")) {
- mode = of_get_property(np, "dr_mode", NULL);
- bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
- bcsr12 |= BCSR12_USB_SER_PIN;
- if (mode && !strcmp(mode, "peripheral"))
- bcsr12 |= BCSR12_USB_SER_DEVICE;
- out_8(bcsr_regs + 12, bcsr12);
- } else {
- printk(KERN_ERR "USB DR: unsupported PHY\n");
- }
-
- of_node_put(np);
-out:
- iounmap(bcsr_regs);
- return ret;
-}
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init mpc837x_mds_setup_arch(void)
-{
- mpc83xx_setup_arch();
- mpc837xmds_usb_cfg();
-}
-
-machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
-
-define_machine(mpc837x_mds) {
- .name = "MPC837x MDS",
- .compatible = "fsl,mpc837xmds",
- .setup_arch = mpc837x_mds_setup_arch,
- .discover_phbs = mpc83xx_setup_pci,
- .init_IRQ = mpc83xx_ipic_init_IRQ,
- .get_irq = ipic_get_irq,
- .restart = mpc83xx_restart,
- .time_init = mpc83xx_time_init,
- .progress = udbg_progress,
-};
projects / platform / kernel / linux-rpi.git / commitdiff