drm/i915: Pull the cmnlane tricks into its own power well ops

Remove the clutter in __vlv_set_power_well() by moving the cmnlane
handling into custom enable/disable hooks for the cmnlane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 719db71..16a94e1 100644 (file)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6013,31 +6013,9 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
 void __vlv_set_power_well(struct drm_i915_private *dev_priv,
                          enum punit_power_well power_well_id, bool enable)
 {
-       struct drm_device *dev = dev_priv->dev;
        u32 mask;
        u32 state;
        u32 ctrl;
-       enum pipe pipe;
-
-       if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
-               if (enable) {
-                       /*
-                        * Enable the CRI clock source so we can get at the
-                        * display and the reference clock for VGA
-                        * hotplug / manual detection.
-                        */
-                       I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-                                  DPLL_REFA_CLK_ENABLE_VLV |
-                                  DPLL_INTEGRATED_CRI_CLK_VLV);
-                       udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
-               } else {
-                       for_each_pipe(pipe)
-                               assert_pll_disabled(dev_priv, pipe);
-                       /* Assert common reset */
-                       I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) &
-                                  ~DPIO_CMNRST);
-               }
-       }
 
        mask = PUNIT_PWRGT_MASK(power_well_id);
        state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
@@ -6065,20 +6043,6 @@ void __vlv_set_power_well(struct drm_i915_private *dev_priv,
 
 out:
        mutex_unlock(&dev_priv->rps.hw_lock);
-
-       /*
-        * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
-        *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
-        *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
-        *   b. The other bits such as sfr settings / modesel may all
-        *      be set to 0.
-        *
-        * This should only be done on init and resume from S3 with
-        * both PLLs disabled, or we risk losing DPIO and PLL
-        * synchronization.
-        */
-       if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable)
-               I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
 }
 
 static void vlv_set_power_well(struct drm_i915_private *dev_priv,
@@ -6178,6 +6142,53 @@ static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
        vlv_set_power_well(dev_priv, power_well, false);
 }
 
+static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+                                          struct i915_power_well *power_well)
+{
+       WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+       /*
+        * Enable the CRI clock source so we can get at the
+        * display and the reference clock for VGA
+        * hotplug / manual detection.
+        */
+       I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+                  DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+       udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+
+       vlv_set_power_well(dev_priv, power_well, true);
+
+       /*
+        * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+        *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
+        *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
+        *   b. The other bits such as sfr settings / modesel may all
+        *      be set to 0.
+        *
+        * This should only be done on init and resume from S3 with
+        * both PLLs disabled, or we risk losing DPIO and PLL
+        * synchronization.
+        */
+       I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+                                           struct i915_power_well *power_well)
+{
+       struct drm_device *dev = dev_priv->dev;
+       enum pipe pipe;
+
+       WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+       for_each_pipe(pipe)
+               assert_pll_disabled(dev_priv, pipe);
+
+       /* Assert common reset */
+       I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
+
+       vlv_set_power_well(dev_priv, power_well, false);
+}
+
 static void check_power_well_state(struct drm_i915_private *dev_priv,
                                   struct i915_power_well *power_well)
 {
@@ -6426,6 +6437,13 @@ static const struct i915_power_well_ops vlv_display_power_well_ops = {
        .is_enabled = vlv_power_well_enabled,
 };
 
+static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
+       .sync_hw = vlv_power_well_sync_hw,
+       .enable = vlv_dpio_cmn_power_well_enable,
+       .disable = vlv_dpio_cmn_power_well_disable,
+       .is_enabled = vlv_power_well_enabled,
+};
+
 static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
        .sync_hw = vlv_power_well_sync_hw,
        .enable = vlv_power_well_enable,
@@ -6486,7 +6504,7 @@ static struct i915_power_well vlv_power_wells[] = {
                .name = "dpio-common",
                .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
                .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
-               .ops = &vlv_dpio_power_well_ops,
+               .ops = &vlv_dpio_cmn_power_well_ops,
        },
 };