arm: dts: qcom: apq8064: Add fixed rate on-board oscillators

Currently the rates of the xo and sleep clocks are hard-coded in the
GCC driver, but this is a board layout description that actually should
be in the DT. Moving them into DT also allows us to insert the RPM
controlled clocks between the DT and GCC clocks.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index e6c7476..edfc6ee 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -91,6 +91,26 @@
                interrupts = <1 10 0x304>;
        };
 
+       clocks {
+               cxo_board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <19200000>;
+               };
+
+               pxo_board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <27000000>;
+               };
+
+               sleep_clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <32768>;
+               };
+       };
+
        sfpb_mutex: hwmutex {
                compatible = "qcom,sfpb-mutex";
                syscon = <&sfpb_wrapper_mutex 0x604 0x4>;