irqchip/gic: Take lock when updating irq type

Most MMIO GIC register accesses use a 1-hot bit scheme that
avoids requiring any form of locking. This isn't true for the
GICD_ICFGRn registers, which require a RMW sequence.

Unfortunately, we seem to be missing a lock for these particular
accesses, which could result in a race condition if changing the
trigger type on any two interrupts within the same set of 16
interrupts (and thus controlled by the same CFGR register).

Introduce a private lock in the GIC common comde for this
particular case, making it cover both GIC implementations
in one go.

Cc: stable@vger.kernel.org
Signed-off-by: Aniruddha Banerjee <aniruddhab@nvidia.com>
[maz: updated changelog]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 30017df..01e673c 100644 (file)
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,8 @@
 
 #include "irq-gic-common.h"
 
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+
 static const struct gic_kvm_info *gic_kvm_info;
 
 const struct gic_kvm_info *gic_get_kvm_info(void)
@@ -53,11 +55,13 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
        u32 confoff = (irq / 16) * 4;
        u32 val, oldval;
        int ret = 0;
+       unsigned long flags;
 
        /*
         * Read current configuration register, and insert the config
         * for "irq", depending on "type".
         */
+       raw_spin_lock_irqsave(&irq_controller_lock, flags);
        val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
        if (type & IRQ_TYPE_LEVEL_MASK)
                val &= ~confmask;
@@ -65,8 +69,10 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
                val |= confmask;
 
        /* If the current configuration is the same, then we are done */
-       if (val == oldval)
+       if (val == oldval) {
+               raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
                return 0;
+       }
 
        /*
         * Write back the new configuration, and possibly re-enable
@@ -84,6 +90,7 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
                        pr_warn("GIC: PPI%d is secure or misconfigured\n",
                                irq - 16);
        }
+       raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
 
        if (sync_access)
                sync_access();