clocks {
div1_mclk: divclk1 {
compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk_pin>;
+ pinctrl-0 = <&div_clk1>;
pinctrl-names = "default";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
enable-active-high;
gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam0_vdig_default>;
+ pinctrl-0 = <&main_cam_pwr_en>;
};
cam1_vdig_vreg: cam1-vdig {
enable-active-high;
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam1_vdig_default>;
+ pinctrl-0 = <&chat_cam_pwr_en>;
vin-supply = <&vreg_s3a_1p35>;
};
enable-active-high;
gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam_vio_default>;
+ pinctrl-0 = <&main_cam_pwr_io_en>;
vin-supply = <&vreg_lvs1a_1p8>;
};
id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
+ pinctrl-0 = <&cc_dir_default &usb_detect_en>;
};
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
pinctrl-names = "default";
- pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
- <&cam_snapshot_pin_a>;
+ pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
button-vol-down {
label = "Volume Down";
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
compatible = "gpio-keys";
label = "Hall sensors";
pinctrl-names = "default";
- pinctrl-0 = <&hall_sensor0_default>;
+ pinctrl-0 = <&acc_cover_open>;
event-hall-sensor0 {
label = "Cover Hall Sensor";
compatible = "gpio-vibrator";
enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vib_default>;
+ pinctrl-0 = <&vib_ldo_en>;
};
};
vdd-supply = <&cam_vio_vreg>;
pinctrl-names = "default";
- pinctrl-0 = <&tof_int &tof_reset>;
+ pinctrl-0 = <&tof_int_n &tof_reset>;
};
};
"OPTION_2 (DISALLOWED)",
"PM_SLB (DISALLOWED)";
- vol_down_pin_a: vol-down-active-state {
+ vol_down_n: vol-down-n-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active-state {
+ focus_n: focus-n-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active-state {
+ snapshot_n: snapshot-n-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- audio_mclk_pin: audio-mclk-pin-active-state {
+ div_clk1: div-clk1-state {
pins = "gpio13";
function = "func2";
power-source = <0>;
"SPMI_I2C_SEL",
"NC";
- cam_vio_default: cam-vio-active-state {
+ main_cam_pwr_io_en: main-cam-pwr-io-en-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
power-source = <1>;
};
- vib_default: vib-en-state {
+ vib_ldo_en: vib-ldo-en-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
"RFFE1_DATA",
"RFFE1_CLK";
- mdp_vsync_n: mdp-vsync-n-state {
+ mdp_vsync_p: mdp-vsync-p-state {
pins = "gpio10";
function = "mdp_vsync_a";
drive-strength = <2>;
output-low;
};
- msm_mclk0_default: msm-mclk0-active-state {
+ cam_mclk0_active: cam-mclk0-active-state {
pins = "gpio13";
function = "cam_mclk";
drive-strength = <2>;
bias-disable;
};
- msm_mclk1_default: msm-mclk1-active-state {
+ cam_mclk1_active: cam-mclk1-active-state {
pins = "gpio14";
function = "cam_mclk";
drive-strength = <2>;
drive-strength = <2>;
};
- cam0_vdig_default: cam0-vdig-default-state {
+ main_cam_pwr_en: main-cam-pwr-en-default-state {
pins = "gpio21";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- tof_int: tof-int-state {
+ tof_int_n: tof-int-n-state {
pins = "gpio22";
function = "gpio";
bias-pull-up;
input-enable;
};
- cam1_vdig_default: cam1-vdig-default-state {
+ chat_cam_pwr_en: chat-cam-pwr-en-default-state {
pins = "gpio25";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- usb_extcon_active: usb-extcon-active-state {
- pins = "gpio38";
+ tof_reset: tof-reset-state {
+ pins = "gpio27";
function = "gpio";
bias-disable;
- drive-strength = <16>;
+ drive-strength = <2>;
};
- tof_reset: tof-reset-state {
- pins = "gpio27";
+ cc_dir_default: cc-dir-active-state {
+ pins = "gpio38";
function = "gpio";
bias-disable;
- drive-strength = <2>;
+ drive-strength = <16>;
};
- hall_sensor0_default: acc-cover-open-state {
+ acc_cover_open: acc-cover-open-state {
pins = "gpio124";
function = "gpio";
bias-disable;
bias-pull-up;
};
- usb_vbus_active: usb-vbus-active-state {
+ usb_detect_en: usb-detect-en-active-state {
pins = "gpio128";
function = "gpio";
bias-disable;