ARM: dts: stm32: add timers support on stm32mp135f-dk

Configure timers support on stm32mp135f-dk.
The timers TIM3, TIM4, TIM8 & TIM14 which can be used on
expansion GPIO connector are disabled by default.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 9ff5a3e..338b4f6 100644 (file)
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -208,6 +208,64 @@
        status = "disabled";
 };
 
+&timers3 {
+       /delete-property/dmas;
+       /delete-property/dma-names;
+       status = "disabled";
+       pwm {
+               pinctrl-0 = <&pwm3_pins_a>;
+               pinctrl-1 = <&pwm3_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
+               status = "okay";
+       };
+       timer@2 {
+               status = "okay";
+       };
+};
+
+&timers4 {
+       /delete-property/dmas;
+       /delete-property/dma-names;
+       status = "disabled";
+       pwm {
+               pinctrl-0 = <&pwm4_pins_a>;
+               pinctrl-1 = <&pwm4_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
+               status = "okay";
+       };
+       timer@3 {
+               status = "okay";
+       };
+};
+
+&timers8 {
+       /delete-property/dmas;
+       /delete-property/dma-names;
+       status = "disabled";
+       pwm {
+               pinctrl-0 = <&pwm8_pins_a>;
+               pinctrl-1 = <&pwm8_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
+               status = "okay";
+       };
+       timer@7 {
+               status = "okay";
+       };
+};
+
+&timers14 {
+       status = "disabled";
+       pwm {
+               pinctrl-0 = <&pwm14_pins_a>;
+               pinctrl-1 = <&pwm14_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
+               status = "okay";
+       };
+       timer@13 {
+               status = "okay";
+       };
+};
+
 &uart4 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart4_pins_a>;