[ Upstream commit
59f96244af9403ddf4810ec5c0fbe8920857634e ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
On some places, this is ok, but on others the usage count
ended being unbalanced on failures.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit
dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, such function always return zero on success. So,
some code can be simplified.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
goto unlock;
set_bit(ST_CAPT_BUSY, &fimc->state);
- ret = pm_runtime_get_sync(&fimc->pdev->dev);
- if (ret < 0) {
- pm_runtime_put_sync(&fimc->pdev->dev);
+ ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+ if (ret < 0)
goto unlock;
- }
ret = v4l2_fh_open(file);
if (ret) {
goto err_irq;
}
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
- goto err_pm;
+ goto err_irq;
vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
if (ret < 0)
goto unlock;
- ret = pm_runtime_get_sync(&isp->pdev->dev);
+ ret = pm_runtime_resume_and_get(&isp->pdev->dev);
if (ret < 0)
goto rel_fh;
if (!ret)
goto unlock;
rel_fh:
- pm_runtime_put_noidle(&isp->pdev->dev);
v4l2_fh_release(file);
unlock:
mutex_unlock(&isp->video_lock);
pr_debug("on: %d\n", on);
if (on) {
- ret = pm_runtime_get_sync(&is->pdev->dev);
- if (ret < 0) {
- pm_runtime_put(&is->pdev->dev);
+ ret = pm_runtime_resume_and_get(&is->pdev->dev);
+ if (ret < 0)
return ret;
- }
+
set_bit(IS_ST_PWR_ON, &is->state);
ret = fimc_is_start_firmware(is);
}
set_bit(ST_FLITE_IN_USE, &fimc->state);
- ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
if (ret < 0)
- goto err_pm;
+ goto err_in_use;
ret = v4l2_fh_open(file);
if (ret < 0)
v4l2_fh_release(file);
err_pm:
pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
clear_bit(ST_FLITE_IN_USE, &fimc->state);
unlock:
mutex_unlock(&fimc->lock);
static int start_streaming(struct vb2_queue *q, unsigned int count)
{
struct fimc_ctx *ctx = q->drv_priv;
- int ret;
- ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
- return ret > 0 ? 0 : ret;
+ return pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
}
static void stop_streaming(struct vb2_queue *q)
{
struct fimc_ctx *ctx = q->drv_priv;
-
fimc_m2m_shutdown(ctx);
fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
pm_runtime_put(&ctx->fimc_dev->pdev->dev);
if (!fmd->pmf)
return -ENXIO;
- ret = pm_runtime_get_sync(fmd->pmf);
- if (ret < 0) {
- pm_runtime_put(fmd->pmf);
+ ret = pm_runtime_resume_and_get(fmd->pmf);
+ if (ret < 0)
return ret;
- }
fmd->num_sensors = 0;
if (camclk->fmd->pmf == NULL)
return -ENODEV;
- ret = pm_runtime_get_sync(camclk->fmd->pmf);
- return ret < 0 ? ret : 0;
+ return pm_runtime_resume_and_get(camclk->fmd->pmf);
}
static void cam_clk_unprepare(struct clk_hw *hw)
struct device *dev = &state->pdev->dev;
if (on)
- return pm_runtime_get_sync(dev);
+ return pm_runtime_resume_and_get(dev);
return pm_runtime_put_sync(dev);
}
if (enable) {
s5pcsis_clear_counters(state);
- ret = pm_runtime_get_sync(&state->pdev->dev);
- if (ret && ret != 1) {
- pm_runtime_put_noidle(&state->pdev->dev);
+ ret = pm_runtime_resume_and_get(&state->pdev->dev);
+ if (ret < 0)
return ret;
- }
}
mutex_lock(&state->lock);
if (!enable)
pm_runtime_put(&state->pdev->dev);
- return ret == 1 ? 0 : ret;
+ return ret;
}
static int s5pcsis_enum_mbus_code(struct v4l2_subdev *sd,