ARM: sun4i: olinuxino lime: Convert to DT label based syntax

In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8..03350df 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -56,136 +56,131 @@
        model = "Olimex A10-OLinuXino-LIME";
        compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
-       cpus {
-               cpu0: cpu@0 {
-                       /*
-                        * The A10-Lime is known to be unstable
-                        * when running at 1008 MHz
-                        */
-                       operating-points = <
-                               /* kHz    uV */
-                               912000  1350000
-                               864000  1300000
-                               624000  1250000
-                               >;
-                       cooling-max-level = <2>;
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxinolime>;
+
+               green {
+                       label = "a10-olinuxino-lime:green:usr";
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
                };
        };
+};
 
-       soc@01c00000 {
-               emac: ethernet@01c0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&emac_pins_a>;
-                       phy = <&phy1>;
-                       status = "okay";
-               };
+&ahci {
+       target-supply = <&reg_ahci_5v>;
+       status = "okay";
+};
 
-               mdio@01c0b080 {
-                       status = "okay";
+&cpu0 {
+       /*
+        * The A10-Lime is known to be unstable when running at 1008 MHz
+        */
+       operating-points = <
+               /* kHz    uV */
+               912000  1350000
+               864000  1300000
+               624000  1250000
+               >;
+       cooling-max-level = <2>;
+};
 
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-               };
+&ehci0 {
+       status = "okay";
+};
 
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-                       cd-inverted;
-                       status = "okay";
-               };
+&ehci1 {
+       status = "okay";
+};
 
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       usb2_vbus-supply = <&reg_usb2_vbus>;
-                       status = "okay";
-               };
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_pins_a>;
+       phy = <&phy1>;
+       status = "okay";
+};
 
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
 
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
+       axp209: pmic@34 {
+               compatible = "x-powers,axp209";
+               reg = <0x34>;
+               interrupts = <0>;
 
-               ahci: sata@01c18000 {
-                       target-supply = <&reg_ahci_5v>;
-                       status = "okay";
-               };
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+};
 
-               ehci1: usb@01c1c000 {
-                       status = "okay";
-               };
+&mdio {
+       status = "okay";
 
-               ohci1: usb@01c1c400 {
-                       status = "okay";
-               };
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
 
-               pinctrl@01c20800 {
-                       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-                               allwinner,pins = "PC3";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       led_pins_olinuxinolime: led_pins@0 {
-                               allwinner,pins = "PH2";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
 
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
+&ohci0 {
+       status = "okay";
+};
 
-               i2c0: i2c@01c2ac00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins_a>;
-                       status = "okay";
+&ohci1 {
+       status = "okay";
+};
 
-                       axp209: pmic@34 {
-                               compatible = "x-powers,axp209";
-                               reg = <0x34>;
-                               interrupts = <0>;
+&pio {
+       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+               allwinner,pins = "PC3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
+       led_pins_olinuxinolime: led_pins@0 {
+               allwinner,pins = "PH2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+};
 
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_olinuxinolime>;
+&reg_ahci_5v {
+       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+       gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
 
-               green {
-                       label = "a10-olinuxino-lime:green:usr";
-                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-       };
+&reg_usb1_vbus {
+       status = "okay";
+};
 
-       reg_ahci_5v: ahci-5v {
-               pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-               gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-               status = "okay";
-       };
+&reg_usb2_vbus {
+       status = "okay";
+};
 
-       reg_usb1_vbus: usb1-vbus {
-               status = "okay";
-       };
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
 
-       reg_usb2_vbus: usb2-vbus {
-               status = "okay";
-       };
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
 };