Documentation: dt: bindings: Update Broadcom 7445 switch document

Document the updated binding which conforms to the new DSA binding in
net/dsa/dsa.txt.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index 30d4875..fb40891 100644 (file)
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -6,9 +6,13 @@ Required properties:
 - reg: addresses and length of the register sets for the device, must be 6
   pairs of register addresses and lengths
 - interrupts: interrupts for the devices, must be two interrupts
+- #address-cells: must be 1, see dsa/dsa.txt
+- #size-cells: must be 0, see dsa/dsa.txt
+
+Deprecated binding required properties:
+
 - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
 - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
-- #size-cells: must be 0
 - #address-cells: must be 2, see dsa/dsa.txt
 
 Subnodes:
@@ -48,6 +52,45 @@ switch_top@f0b00000 {
        ethernet_switch@0 {
                compatible = "brcm,bcm7445-switch-v4.0";
                #size-cells = <0>;
+               #address-cells = <1>;
+               reg = <0x0 0x40000
+                       0x40000 0x110
+                       0x40340 0x30
+                       0x40380 0x30
+                       0x40400 0x34
+                       0x40600 0x208>;
+               reg-names = "core", "reg", intrl2_0", "intrl2_1",
+                           "fcb, "acb";
+               interrupts = <0 0x18 0
+                               0 0x19 0>;
+               brcm,num-gphy = <1>;
+               brcm,num-rgmii-ports = <2>;
+               brcm,fcb-pause-override;
+               brcm,acb-packets-inflight;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               label = "gphy";
+                               reg = <0>;
+                       };
+               };
+       };
+};
+
+Example using the old DSA DeviceTree binding:
+
+switch_top@f0b00000 {
+       compatible = "simple-bus";
+       #size-cells = <1>;
+       #address-cells = <1>;
+       ranges = <0 0xf0b00000 0x40804>;
+
+       ethernet_switch@0 {
+               compatible = "brcm,bcm7445-switch-v4.0";
+               #size-cells = <0>;
                #address-cells = <2>;
                reg = <0x0 0x40000
                        0x40000 0x110