[ Upstream commit
5e344807735023cd3a67c37a1852b849caa42620 ]
When repeatedly changing the interface link speed using the command below:
ethtool -s eth0 speed 100 duplex full
ethtool -s eth0 speed 1000 duplex full
The following errors may sometimes be reported by the ARM SMMU driver:
[ 5395.035364] fec
5b040000.ethernet eth0: Link is Down
[ 5395.039255] arm-smmu
51400000.iommu: Unhandled context fault:
fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2
[ 5398.108460] fec
5b040000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control off
It is identified that the FEC driver does not properly stop the TX queue
during the link speed transitions, and this results in the invalid virtual
I/O address translations from the SMMU and causes the context faults.
Fixes: dbc64a8ea231 ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
/* if any of the above changed restart the FEC */
if (status_change) {
+ netif_stop_queue(ndev);
napi_disable(&fep->napi);
netif_tx_lock_bh(ndev);
fec_restart(ndev);
}
} else {
if (fep->link) {
+ netif_stop_queue(ndev);
napi_disable(&fep->napi);
netif_tx_lock_bh(ndev);
fec_stop(ndev);