ARM: dts: at91: kizboxmini: Style cleanup

- use tags from included dtsi instead of duplicating the hierarchy

There are no differences in the generated .dtb

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20190812212757.23432-5-uwe@kleine-koenig.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 0620dcd..cb22f5f 100644 (file)
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -32,96 +32,6 @@
        };
 
        ahb {
-               apb {
-                       tcb0: timer@f8008000 {
-                               timer@0 {
-                                       compatible = "atmel,tcb-timer";
-                                       reg = <0>;
-                               };
-
-                               timer@1 {
-                                       compatible = "atmel,tcb-timer";
-                                       reg = <1>;
-                               };
-                       };
-
-                       usart0: serial@f801c000 {
-                               status = "okay";
-                       };
-
-                       macb0: ethernet@f802c000 {
-                               phy-mode = "rmii";
-                               status = "okay";
-                       };
-
-                       pwm0: pwm@f8034000 {
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-                                            &pinctrl_pwm0_pwm1_1>;
-                               status = "okay";
-                       };
-
-                       dbgu: serial@fffff200 {
-                               status = "okay";
-                       };
-
-                       watchdog@fffffe40 {
-                               status = "okay";
-                       };
-               };
-
-               usb0: ohci@600000 {
-                       num-ports = <1>;
-                       status = "okay";
-               };
-
-               usb1: ehci@700000 {
-                       status = "okay";
-               };
-
-               ebi: ebi@10000000 {
-                       pinctrl-0 = <&pinctrl_ebi_addr_nand
-                                    &pinctrl_ebi_data_0_7>;
-                       pinctrl-names = "default";
-                       status = "okay";
-
-                       nand_controller: nand-controller {
-                               status = "okay";
-                               pinctrl-0 = <&pinctrl_nand_oe_we
-                                            &pinctrl_nand_cs
-                                            &pinctrl_nand_rb>;
-                               pinctrl-names = "default";
-
-                               nand@3 {
-                                       reg = <0x3 0x0 0x800000>;
-                                       rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-                                       cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-                                       nand-bus-width = <8>;
-                                       nand-ecc-mode = "hw";
-                                       nand-ecc-strength = <4>;
-                                       nand-ecc-step-size = <512>;
-                                       nand-on-flash-bbt;
-                                       label = "atmel_nand";
-
-                                       partitions {
-                                               compatible = "fixed-partitions";
-                                               #address-cells = <1>;
-                                               #size-cells = <1>;
-
-                                               bootstrap@0 {
-                                                       label = "bootstrap";
-                                                       reg = <0x0 0x20000>;
-                                               };
-
-                                               ubi@20000 {
-                                                       label = "ubi";
-                                                       reg = <0x20000 0x7fe0000>;
-                                               };
-                                       };
-                               };
-                       };
-               };
-
                nand0: nand@40000000 {
                        nand-bus-width = <8>;
                        nand-ecc-mode = "hw";
@@ -130,7 +40,6 @@
                        atmel,pmecc-sector-size = <512>;
                        nand-on-flash-bbt;
                        status = "okay";
-
                };
        };
 
@@ -172,3 +81,91 @@
                };
        };
 };
+
+&dbgu {
+       status = "okay";
+};
+
+&ebi {
+       pinctrl-0 = <&pinctrl_ebi_addr_nand
+                    &pinctrl_ebi_data_0_7>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       nand-controller {
+               pinctrl-0 = <&pinctrl_nand_oe_we
+                            &pinctrl_nand_cs
+                            &pinctrl_nand_rb>;
+               pinctrl-names = "default";
+               status = "okay";
+
+               nand@3 {
+                       reg = <0x3 0x0 0x800000>;
+                       rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+                       cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "hw";
+                       nand-ecc-strength = <4>;
+                       nand-ecc-step-size = <512>;
+                       nand-on-flash-bbt;
+                       label = "atmel_nand";
+
+                       partitions {
+                               compatible = "fixed-partitions";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               bootstrap@0 {
+                                       label = "bootstrap";
+                                       reg = <0x0 0x20000>;
+                               };
+
+                               ubi@20000 {
+                                       label = "ubi";
+                                       reg = <0x20000 0x7fe0000>;
+                               };
+                       };
+               };
+       };
+};
+
+&macb0 {
+       phy-mode = "rmii";
+       status = "okay";
+};
+
+&pwm0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+                    &pinctrl_pwm0_pwm1_1>;
+       status = "okay";
+};
+
+&tcb0 {
+       timer@0 {
+               compatible = "atmel,tcb-timer";
+               reg = <0>;
+       };
+
+       timer@1 {
+               compatible = "atmel,tcb-timer";
+               reg = <1>;
+       };
+};
+
+&usart0 {
+       status = "okay";
+};
+
+&usb0 {
+       num-ports = <1>;
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};