+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
+Mon Mar 17 15:04:47 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Make-common.in (CSEARCH): Do not include the gdb directory in
+ the search path.
+
+Mon Mar 17 13:16:26 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
+ SIM_WARNING): Drop, requiring the simulator specific Makefile.in
+ to explicitly incorporate these.
+
+ * aclocal.m4 (--enable-sim-alignment); New option. Strongly
+ specify the alignment restrictions of the target architecture -
+ without this option all alignment restrictions are accomodated.
+ (--enable-sim-assert): New option. Conditionally compile in
+ assertion statements.
+ (--enable-sim-float): New option. Strongly specify the target's
+ floating point support.
+ (--enable-sim-hardware): New option. Specify the hardware devices
+ included in the simulation.
+ (--enable-sim-packages): New option. Specify the hardware
+ packages included in the simulation.
+ (--enable-sim-regparm): New option. Specify that parameters be
+ passed in registers instead of on the stack.
+ (--enable-sim-reserved-bits): New option. Specify that reserved
+ bits within an instruction are are correctly set.
+ (--enable-sim-smp): New option. Specify the level of SMP support
+ to be included in the simulator.
+ (--enable-sim-stdcall): New option. Specify an alternative
+ function call convention.
+ (--enable-sim-xor-endian): New option. Configure xor-endian
+ support used by some targets to implement bi-endian support.
+
Fri Mar 14 19:51:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* aclocal.m4 (--enable-sim-hostendian): New option. Allow the
SIM_BSWAP = @sim_bswap@
SIM_CFLAGS = @sim_cflags@
SIM_DEBUG = @sim_debug@
-SIM_ENDIAN = @sim_endian@
-SIM_HOSTENDIAN = @sim_hostendian@
-SIM_INLINE = @sim_inline@
SIM_TRACE = @sim_trace@
-SIM_WARNINGS = @sim_warnings@
+
HDEFINES = @HDEFINES@
TDEFINES =
## COMMON_POST_CONFIG_FRAG
CONFIG_CFLAGS = @DEFS@ $(SIM_CFLAGS) $(SIM_DEBUG) $(SIM_TRACE) $(SIM_BSWAP) \
- $(SIM_HOSTENDIAN) $(SIM_ENDIAN) $(SIM_INLINE) $(SIM_WARNINGS) \
$(SIM_EXTRA_CFLAGS) $(HDEFINES) $(TDEFINES)
CSEARCH = -I. -I$(srcdir) -I../common -I$(srcdir)/../common \
-I../../include -I$(srcroot)/include \
- -I../../bfd -I$(srcroot)/bfd -I$(srcroot)/gdb \
+ -I../../bfd -I$(srcroot)/bfd \
-I../../opcodes -I$(srcroot)/opcodes
ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS)
BUILD_CFLAGS = -g -O $(CSEARCH)
. ${srcdir}/../../bfd/configure.host
-dnl Standard simulator options.
+dnl Standard (and optional) simulator options.
dnl Eventually all simulators will support these.
dnl Do not add any here that cannot be supported by all simulators.
dnl Do not add similar but different options to a particular simulator,
dnl all shall eventually behave the same way.
+dnl
+dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
+dnl Simulators that wish to use the relevant option specify the macro
+dnl in the simulator specific configure.in file between the SIM_AC_COMMON
+dnl and SIM_AC_OUTPUT lines.
+
+
+dnl Specify the alignment restrictions of the target architecture.
+dnl Without this option all possible alignment restrictions are accomidated.
+AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
+[
+AC_ARG_ENABLE(sim-alignment,
+[ --enable-sim-alignment=align Specify strict or nonstrict alignment.],
+[case "${enableval}" in
+ yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+ no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+ 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+ echo "Setting alignment flags = $sim_alignment" 6>&1
+fi],[sim_alignment=""])dnl
+AC_SUBST(sim_alignment)
+])dnl
+
+
+dnl Conditionally compile in assertion statements.
+AC_DEFUN(SIM_AC_OPTION_ASSERT,
+[
+AC_ARG_ENABLE(sim-assert,
+[ --enable-sim-assert Specify whether to perform random assertions.],
+[case "${enableval}" in
+ yes) sim_assert="-DWITH_ASSERT=1";;
+ no) sim_assert="-DWITH_ASSERT=0";;
+ *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
+ echo "Setting assert flags = $sim_assert" 6>&1
+fi],[sim_assert=""])dnl
+AC_SUBST(sim_assert)
+])
dnl This is a generic option to enable special byte swapping
AC_ARG_ENABLE(sim-bswap,
[ --enable-sim-bswap Use Host specific BSWAP instruction.],
[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
esac
AC_SUBST(sim_debug)
-dnl --enable-sim-trace is for users of the simulator
-dnl the allowable values are work-in-progress
-AC_ARG_ENABLE(sim-trace,
-[ --enable-sim-trace=opts Enable tracing flags],
-[case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
- echo "Setting sim trace = $sim_trace" 6>&1
-fi],[sim_trace=""])dnl
-AC_SUBST(sim_trace)
-
-
-dnl These are available to append to as desired.
-sim_link_files=
-sim_link_links=
-
-dnl Create tconfig.h either from simulator's tconfig.in or default one
-dnl in common.
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
- sim_link_files=tconfig.in
-else
- sim_link_files=../common/tconfig.in
-fi
-
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-]) dnl End of SIM_AC_COMMON
-
-
-dnl Almost standard simulator options.
-dnl Eventually all simulators will support these.
-
-
dnl --enable-sim-endian={yes,no,big,little} is for simulators
dnl that support both big and little endian targets.
AC_DEFUN(SIM_AC_OPTION_ENDIAN,
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
fi],[sim_endian="${default_sim_endian}"])dnl
+AC_SUBST(sim_endian)
])
else
sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
fi])dnl
+AC_SUBST(sim_hostendian)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_FLOAT,
+[
+AC_ARG_ENABLE(sim-float,
+[ --enable-sim-float Specify whether to use host floating point or simulate.],
+[case "${enableval}" in
+ yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
+ no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
+ echo "Setting float flags = $sim_float" 6>&1
+fi],[sim_float=""])dnl
+AC_SUBST(sim_float)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_HARDWARE,
+[
+AC_ARG_ENABLE(sim-hardware,
+[ --enable-sim-hardware=list Specify the hardware to be included in the build.],
+[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+case "${enableval}" in
+ yes) ;;
+ no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
+ ,*) hardware="${hardware}${enableval}";;
+ *,) hardware="${enableval}${hardware}";;
+ *) hardware="${enableval}"'';;
+esac
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$hardware" != x""; then
+ echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi])dnl
+AC_SUBST(sim_hardware)
])
else
sim_inline=""
fi])dnl
+AC_SUBST(sim_inline)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_PACKAGES,
+[
+AC_ARG_ENABLE(sim-packages,
+[ --enable-sim-packages=list Specify the packages to be included in the build.],
+[packages=disklabel
+case "${enableval}" in
+ yes) ;;
+ no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
+ ,*) packages="${packages}${enableval}";;
+ *,) packages="${enableval}${packages}";;
+ *) packages="${enableval}"'';;
+esac
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$packages" != x""; then
+ echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi],[packages=disklabel
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+ echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi])dnl
+AC_SUBST(sim_packages)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_REGPARM,
+[
+AC_ARG_ENABLE(sim-regparm,
+[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.],
+[case "${enableval}" in
+ 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
+ no) sim_regparm="" ;;
+ yes) sim_regparm="-DWITH_REGPARM=3";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
+ echo "Setting regparm flags = $sim_regparm" 6>&1
+fi],[sim_regparm=""])dnl
+AC_SUBST(sim_regparm)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
+[
+AC_ARG_ENABLE(sim-reserved-bits,
+[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.],
+[case "${enableval}" in
+ yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
+ no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
+ *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
+ echo "Setting reserved flags = $sim_reserved_bits" 6>&1
+fi],[sim_reserved_bits=""])dnl
+AC_SUBST(sim_reserved_bits)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_SMP,
+[
+AC_ARG_ENABLE(sim-smp,
+[ --enable-sim-smp=n Specify number of processors to configure for.],
+[case "${enableval}" in
+ yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
+ no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
+ *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
+ echo "Setting smp flags = $sim_smp" 6>&1
+fi],[sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5"
+if test x"$silent" != x"yes"; then
+ echo "Setting smp flags = $sim_smp" 6>&1
+fi])dnl
+AC_SUBST(sim_smp)
])
+AC_DEFUN(SIM_AC_OPTION_STDCALL,
+[
+AC_ARG_ENABLE(sim-stdcall,
+[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.],
+[case "${enableval}" in
+ no) sim_stdcall="" ;;
+ std*) sim_stdcall="-DWITH_STDCALL=1";;
+ yes) sim_stdcall="-DWITH_STDCALL=1";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
+ echo "Setting function call flags = $sim_stdcall" 6>&1
+fi],[sim_stdcall=""])dnl
+AC_SUBST(sim_stdcall)
+])
+
+
+dnl --enable-sim-trace is for users of the simulator
+dnl the allowable values are work-in-progress
+AC_ARG_ENABLE(sim-trace,
+[ --enable-sim-trace=opts Enable tracing flags],
+[case "${enableval}" in
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+ echo "Setting sim trace = $sim_trace" 6>&1
+fi],[sim_trace=""])dnl
+AC_SUBST(sim_trace)
+
+
dnl --enable-sim-warnings is for developers of the simulator.
dnl it enables extra GCC specific warnings.
AC_DEFUN(SIM_AC_OPTION_WARNINGS,
if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
echo "Setting warning flags = $sim_warnings" 6>&1
fi],[sim_warnings=""])dnl
+AC_SUBST(sim_warnings)
])
+AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
+[
+AC_ARG_ENABLE(sim-xor-endian,
+[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).],
+[case "${enableval}" in
+ yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
+ no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
+ *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
+ echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
+fi],[sim_xor_endian=""])dnl
+AC_SUBST(sim_xor_endian)
+])
+
+dnl These are available to append to as desired.
+sim_link_files=
+sim_link_links=
+
+dnl Create tconfig.h either from simulator's tconfig.in or default one
+dnl in common.
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+ sim_link_files=tconfig.in
+else
+ sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+]) dnl End of SIM_AC_COMMON
dnl Generate the Makefile in a target specific directory.
AC_DEFUN(SIM_AC_OUTPUT,
[
-dnl Optional options
-AC_SUBST(sim_endian)
-AC_SUBST(sim_hostendian)
-AC_SUBST(sim_inline)
-AC_SUBST(sim_warnings)
-dnl
AC_LINK_FILES($sim_link_files, $sim_link_links)
AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in,
[case "x$CONFIG_FILES" in xMakefile*)
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1041 "configure"
+#line 1081 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1056 "configure"
+#line 1096 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1090 "configure"
+#line 1130 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in stdlib.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
done
-echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6
-echo "configure:1132: checking for main in -ltermcap" >&5
-ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for -ltermcap""... $ac_c" 1>&6
+ac_lib_var=`echo termcap'_'main | tr './+\055' '__p_'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1140 "configure"
+#line 1138 "configure"
#include "confdefs.h"
-int main() {
+int main() { return 0; }
+int t() {
main()
; return 0; }
EOF
-if { (eval echo configure:1147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
s%@TERMCAP@%$TERMCAP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in stdlib.h time.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+ * ld-insn.h: Change insn_type to be derived from the portable
+ SIM_INT64_T.
+
+
+Mon Mar 17 15:17:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * ld-decode.c (load_decode_table): Rename slash to reserved.
+ (dump_decode_rule): Ditto.
+
+ * ld-insn.c (parse_insn_format): Differentiate between a `/' -
+ reserved bit - and a `*' - wild card.
+ (parse_insn_format): Change is_slash to more informative reserved.
+ (dump_insn_field): Ditto.
+ (insn_field_is_constant): Ditto.
+ (insn_table_expand_opcode): Ditto.
+
+ * gen-idecode.c (print_idecode_validate): Make check_mask and
+ check_val the correct integer size.
+ (print_idecode_validate): Fix reserved bit check for 64 bit
+ targets.
+
Fri Mar 14 11:24:06 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* ld-insn.c (parse_insn_format): Accept '*' as an alternative of
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1042: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1057 "configure"
+#line 1063 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1063: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1074 "configure"
+#line 1078 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1080: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in string.h strings.h stdlib.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1106: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1111 "configure"
+#line 1112 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1117: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
fi
done
-echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:1143: checking for fabs in -lm" >&5
-ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for -lm""... $ac_c" 1>&6
+ac_lib_var=`echo m'_'fabs | tr './+\055' '__p_'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1151 "configure"
+#line 1149 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char fabs();
-int main() {
+int main() { return 0; }
+int t() {
fabs()
; return 0; }
EOF
-if { (eval echo configure:1162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ ac_tr_lib=HAVE_LIB`echo m | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
for ac_func in aint anint sqrt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1192: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1197 "configure"
+#line 1192 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() {
+int main() { return 0; }
+int t() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-fi
+fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_trace@%$sim_trace%g
s%@SIMCONF@%$SIMCONF%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+
+
+
+
+
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
+
+
+
+
+
sim_link_files=
sim_link_links=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1051 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
+#line 1066 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1100 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_debug@%$sim_debug%g
s%@sim_trace@%$sim_trace%g
s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
case "x$CONFIG_FILES" in xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
projects / external / binutils.git / commitdiff