Adding support for the Hauppauge HVR1250 PCIe ATSC board.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
.gpio0 = 0xff02,
}},
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
+ .name = "Hauppauge WinTV-HVR1250",
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x7801,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7911,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1250,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
}
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH09 ], 128, 0);
switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* GPIO-0 cx24227 demodulator reset */
+ dprintk( 1, "%s() Configuring HVR1250 GPIO's\n", __FUNCTION__);
+ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
dprintk(1, "%s()\n", __FUNCTION__);
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
dprintk(1, "%s() FIXME - Implement IR support\n", __FUNCTION__);
break;
cx_write(GPIO2, 0x00);
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
cx_write(port->reg_vld_misc, 0x00);
.status_mode = S5H1409_DEMODLOCKING
};
+static struct s5h1409_config hauppauge_hvr1250_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .if_freq = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
+
static struct mt2131_config hauppauge_hvr1800lp_rev2_tunerconfig = {
0x61
0x61
};
+static struct mt2131_config hauppauge_hvr1250_tunerconfig = {
+ 0x61
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
/* init frontend */
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &hauppauge_hvr1250_config,
+ &dev->i2c_bus[0].i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, port->dvb.frontend,
+ &dev->i2c_bus[0].i2c_adap,
+ &hauppauge_hvr1250_tunerconfig, 0);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
#define CX23885_BOARD_UNKNOWN 0
#define CX23885_BOARD_HAUPPAUGE_HVR1800lp 1
#define CX23885_BOARD_HAUPPAUGE_HVR1800 2
+#define CX23885_BOARD_HAUPPAUGE_HVR1250 3
enum cx23885_itype {
CX23885_VMUX_COMPOSITE1 = 1,