am33xx: Correct and clean up ddr_regs struct
authorTom Rini <trini@ti.com>
Mon, 30 Jul 2012 18:49:47 +0000 (11:49 -0700)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sat, 1 Sep 2012 12:58:13 +0000 (14:58 +0200)
The ddr_regs struct was incorrectly offset after the dt0wiratio0 entry.
Correct this by documenting a missing register that will be used at some
point in the future (when write leveling is supported).  Further, the
cmdNcs{force,delay} fields are undocumented and we have been setting
them to zero, remove.  Next, setting of the
'DATAn_REG_PHY_USE_RANK0_DELAYS field belongs with the rest of the
ddr_data entries, so program it there.  Finally, comment on how we are
configuring the DATA1 registers that correspond to the DATA0 (dt0)
registers defined in the struct.

Signed-off-by: Tom Rini <trini@ti.com>
arch/arm/cpu/armv7/am33xx/ddr.c
arch/arm/cpu/armv7/am33xx/emif4.c
arch/arm/include/asm/arch-am33xx/ddr_defs.h

index 59ca51f..bceed81 100644 (file)
@@ -77,20 +77,14 @@ void config_ddr_phy(const struct emif_regs *regs)
 void config_cmd_ctrl(const struct cmd_control *cmd)
 {
        writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio);
-       writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce);
-       writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay);
        writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff);
        writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout);
 
        writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio);
-       writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce);
-       writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay);
        writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff);
        writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout);
 
        writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio);
-       writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce);
-       writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay);
        writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff);
        writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout);
 }
@@ -106,6 +100,7 @@ void config_ddr_data(int macrono, const struct ddr_data *data)
        writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0);
        writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0);
        writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0);
+       writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0);
        writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0);
 }
 
index ace3d26..3bb91d3 100644 (file)
@@ -61,25 +61,20 @@ static const struct ddr_data ddr2_data = {
                                |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
        .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
                                |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
+       .datauserank0delay = DDR2_PHY_RANK0_DELAY,
        .datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr2_cmd_ctrl_data = {
        .cmd0csratio = DDR2_RATIO,
-       .cmd0csforce = CMD_FORCE,
-       .cmd0csdelay = CMD_DELAY,
        .cmd0dldiff = DDR2_DLL_LOCK_DIFF,
        .cmd0iclkout = DDR2_INVERT_CLKOUT,
 
        .cmd1csratio = DDR2_RATIO,
-       .cmd1csforce = CMD_FORCE,
-       .cmd1csdelay = CMD_DELAY,
        .cmd1dldiff = DDR2_DLL_LOCK_DIFF,
        .cmd1iclkout = DDR2_INVERT_CLKOUT,
 
        .cmd2csratio = DDR2_RATIO,
-       .cmd2csforce = CMD_FORCE,
-       .cmd2csdelay = CMD_DELAY,
        .cmd2dldiff = DDR2_DLL_LOCK_DIFF,
        .cmd2iclkout = DDR2_INVERT_CLKOUT,
 };
@@ -121,9 +116,6 @@ void config_ddr(short ddr_type)
                config_ddr_data(0, &ddr2_data);
                config_ddr_data(1, &ddr2_data);
 
-               writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
-               writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
-
                config_io_ctrl(DDR2_IOCTRL_VALUE);
 
                /* Set CKE to be controlled by EMIF/DDR PHY */
index b37b161..0526863 100644 (file)
@@ -26,8 +26,6 @@
 #define VTP_CTRL_READY         (0x1 << 5)
 #define VTP_CTRL_ENABLE                (0x1 << 6)
 #define VTP_CTRL_START_EN      (0x1)
-#define CMD_FORCE              0x00
-#define CMD_DELAY              0x00
 #define PHY_DLL_LOCK_DIFF      0x0
 #define DDR_CKE_CTRL_NORMAL    0x1
 
@@ -66,43 +64,43 @@ void config_ddr_phy(const struct emif_regs *regs);
 
 /**
  * This structure represents the DDR registers on AM33XX devices.
+ * We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that
+ * correspond to DATA1 registers defined here.
  */
 struct ddr_regs {
        unsigned int resv0[7];
        unsigned int cm0csratio;        /* offset 0x01C */
-       unsigned int cm0csforce;        /* offset 0x020 */
-       unsigned int cm0csdelay;        /* offset 0x024 */
+       unsigned int resv1[2];
        unsigned int cm0dldiff;         /* offset 0x028 */
        unsigned int cm0iclkout;        /* offset 0x02C */
-       unsigned int resv1[8];
+       unsigned int resv2[8];
        unsigned int cm1csratio;        /* offset 0x050 */
-       unsigned int cm1csforce;        /* offset 0x054 */
-       unsigned int cm1csdelay;        /* offset 0x058 */
+       unsigned int resv3[2];
        unsigned int cm1dldiff;         /* offset 0x05C */
        unsigned int cm1iclkout;        /* offset 0x060 */
-       unsigned int resv2[8];
+       unsigned int resv4[8];
        unsigned int cm2csratio;        /* offset 0x084 */
-       unsigned int cm2csforce;        /* offset 0x088 */
-       unsigned int cm2csdelay;        /* offset 0x08C */
+       unsigned int resv5[2];
        unsigned int cm2dldiff;         /* offset 0x090 */
        unsigned int cm2iclkout;        /* offset 0x094 */
-       unsigned int resv3[12];
+       unsigned int resv6[12];
        unsigned int dt0rdsratio0;      /* offset 0x0C8 */
-       unsigned int resv4[4];
+       unsigned int resv7[4];
        unsigned int dt0wdsratio0;      /* offset 0x0DC */
-       unsigned int resv5[4];
+       unsigned int resv8[4];
        unsigned int dt0wiratio0;       /* offset 0x0F0 */
-       unsigned int resv6;
+       unsigned int resv9;
+       unsigned int dt0wimode0;        /* offset 0x0F8 */
        unsigned int dt0giratio0;       /* offset 0x0FC */
-       unsigned int resv7[2];
+       unsigned int resv10;
+       unsigned int dt0gimode0;        /* offset 0x104 */
        unsigned int dt0fwsratio0;      /* offset 0x108 */
-       unsigned int resv8[5];
+       unsigned int resv11[4];
+       unsigned int dt0dqoffset;       /* offset 0x11C */
        unsigned int dt0wrsratio0;      /* offset 0x120 */
-       unsigned int resv9[4];
+       unsigned int resv12[4];
        unsigned int dt0rdelays0;       /* offset 0x134 */
        unsigned int dt0dldiff0;        /* offset 0x138 */
-       unsigned int resv10[39];
-       unsigned int dt1rdelays0;       /* offset 0x1D8 */
 };
 
 /**
@@ -136,6 +134,7 @@ struct ddr_data {
        unsigned long datagiratio0;
        unsigned long datafwsratio0;
        unsigned long datawrsratio0;
+       unsigned long datauserank0delay;
        unsigned long datadldiff0;
 };