arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals

Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other
PMIC infra modules.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-11-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644 (file)
index 0000000..1fcbc7a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+       pm6150_lsid0: pmic@0 {
+               compatible = "qcom,pm6150", "qcom,spmi-pmic";
+               reg = <0x0 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pm6150_pon: pon@800 {
+                       compatible = "qcom,pm8998-pon";
+                       reg = <0x800>;
+                       mode-bootloader = <0x2>;
+                       mode-recovery = <0x1>;
+
+                       pwrkey {
+                               compatible = "qcom,pm8941-pwrkey";
+                               interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               linux,code = <KEY_POWER>;
+                       };
+               };
+
+               pm6150_temp: temp-alarm@2400 {
+                       compatible = "qcom,spmi-temp-alarm";
+                       reg = <0x2400>;
+                       interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+                       io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+                       io-channel-names = "thermal";
+                       #thermal-sensor-cells = <0>;
+               };
+
+               pm6150_adc: adc@3100 {
+                       compatible = "qcom,spmi-adc5";
+                       reg = <0x3100>;
+                       interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #io-channel-cells = <1>;
+
+                       adc-chan@ADC5_DIE_TEMP {
+                               reg = <ADC5_DIE_TEMP>;
+                               label = "die_temp";
+                       };
+               };
+
+               pm6150_gpio: gpios@c000 {
+                       compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+                       reg = <0xc000>;
+                       gpio-controller;
+                       gpio-ranges = <&pm6150_gpio 0 0 10>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       pm6150_lsid1: pmic@1 {
+               compatible = "qcom,pm6150", "qcom,spmi-pmic";
+               reg = <0x1 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};

diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644 (file)
index 0000000..f84027b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+       pm6150l_lsid4: pmic@4 {
+               compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+               reg = <0x4 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pm6150l_gpio: gpios@c000 {
+                       compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+                       reg = <0xc000>;
+                       gpio-controller;
+                       gpio-ranges = <&pm6150l_gpio 0 0 12>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       pm6150l_lsid5: pmic@5 {
+               compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+               reg = <0x5 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index c637a4a..eb4e7f3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 
 #include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
 
 / {
        model = "Qualcomm Technologies, Inc. SC7180 IDP";