mv $@.tmp $@
sinclude $(obj)include/autoconf.mk.dep
+sinclude $(obj)include/autoconf.mk
#########################################################################
else # !config.mk
pcm030_config \
pcm030_LOWBOOT_config: unconfig
- @ >include/config.h
+ @ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
+ CONFIG_SPLASH_SCREEN_ALIGN
+
+ If this option is set the splash image can be freely positioned
+ on the screen. Environment variable "splashpos" specifies the
+ position as "x,y". If a positive number is given it is used as
+ number of pixel from left/top. If a negative number is given it
+ is used as number of pixel from right/bottom. You can also
+ specify 'm' for centering the image.
+
+ Example:
+ setenv splashpos m,m
+ => image at center of screen
+
+ setenv splashpos 30,20
+ => image at x = 30 and y = 20
+
+ setenv splashpos -10,m
+ => vertically centered image
+ at x = dspWidth - bmpWidth - 9
+
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
*/
#include <common.h>
#include <asm/processor.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include "ps2kbd.h"
int drv_isa_kbd_init (void)
{
int error;
- device_t kbddev ;
+ struct stdio_dev kbddev ;
char *stdinname = getenv ("stdin");
if(isa_kbd_init() == -1)
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = stdio_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include "memio.h"
#include <part.h>
int drv_video_init(void)
{
int error, devices = 1 ;
- device_t vgadev ;
+ struct stdio_dev vgadev ;
if (video_inited) return 1;
video_inited = 1;
video_init();
vgadev.tstc = NULL;
vgadev.start = video_start;
- error = device_register (&vgadev);
+ error = stdio_register (&vgadev);
if (error == 0)
{
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-$MKCONFIG -a integrator$1 arm $cpu integrator armltd;
-echo "Variant:: $variant with core $cpu"
+$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
+echo "Variant: $variant with core $cpu"
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
int gunzip(void *, int, unsigned char *, unsigned long *);
int drv_video_init(void)
{
int error, devices = 1;
- device_t videodev;
+ struct stdio_dev videodev;
u8 *dst;
u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
videodev.putc = video_putc; /* 'putc' function */
videodev.puts = video_puts; /* 'puts' function */
- error = device_register(&videodev);
+ error = stdio_register(&videodev);
return (error == 0) ? devices : error;
}
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
int gunzip(void *, int, unsigned char *, unsigned long *);
int drv_video_init(void)
{
- device_t videodev;
+ struct stdio_dev videodev;
video_init((void *)NTSC_FRAME_ADDR);
videodev.ext = DEV_EXT_VIDEO;
videodev.flags = DEV_FLAGS_SYSTEM;
- return device_register(&videodev);
+ return stdio_register(&videodev);
}
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
int gunzip(void *, int, unsigned char *, unsigned long *);
int drv_video_init(void)
{
int error, devices = 1;
- device_t videodev;
+ struct stdio_dev videodev;
u8 *dst;
u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
videodev.putc = video_putc; /* 'putc' function */
videodev.puts = video_puts; /* 'puts' function */
- error = device_register(&videodev);
+ error = stdio_register(&videodev);
return (error == 0) ? devices : error;
}
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <net.h>
#include <timestamp.h>
#include <dtt.h>
#include <common.h>
#include <net.h>
#include "mv_regs.h"
-#include "../../Marvell/common/ppc_error_no.h"
+#include <asm/errno.h>
/*************************************************************************
#include "../common/fsl_diu_fb.h"
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-#include <devices.h>
+#include <stdio_dev.h>
#include <video_fb.h>
#endif
*/
#include <common.h>
#include <ns16550.h>
-#include <console.h>
+#include <stdio_dev.h>
/* Button codes from the AVR */
#define PWRR 0x20 /* Power button release */
#include <asm/processor.h>
#include <asm/byteorder.h>
#include <i2c.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <pci.h>
#include <malloc.h>
#include <bzlib.h>
}
-extern device_t *stdio_devices[];
+extern struct stdio_dev *stdio_devices[];
extern char *stdio_names[];
void show_stdio_dev(void)
#include <common.h>
#include <asm/processor.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include "isa.h"
#include "piix4_pci.h"
#include "kbd.h"
*/
#include <common.h>
#include <asm/processor.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include "isa.h"
#include "kbd.h"
int drv_isa_kbd_init (void)
{
int error;
- device_t kbddev ;
+ struct stdio_dev kbddev ;
char *stdinname = getenv ("stdin");
if(isa_kbd_init()==-1)
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = stdio_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
#include <common.h>
#include <mpc5xx.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <pci_ids.h>
#define PLX9056_LOC
#include "plx9056.h"
int recbuf[REC_BUFFER_SIZE];
static int r_ptr = 0;
int w_ptr;
-device_t pci_con_dev;
+struct stdio_dev pci_con_dev;
int conn=0;
int buff_full=0;
pci_con_dev.puts = pci_con_puts;
pci_con_dev.getc = pci_con_getc;
pci_con_dev.tstc = pci_con_tstc;
- device_register (&pci_con_dev);
+ stdio_register (&pci_con_dev);
printf("PATI ready for PCI connection, type ctrl-c for exit\n");
do {
udelay(10);
#include <version.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <sed156x.h>
int drv_phone_init(void)
{
- device_t console_dev;
+ struct stdio_dev console_dev;
console_init();
console_dev.tstc = phone_tstc; /* 'tstc' function */
console_dev.getc = phone_getc; /* 'getc' function */
- if (device_register(&console_dev) == 0)
+ if (stdio_register(&console_dev) == 0)
return 1;
return 0;
#include <common.h>
#include <watchdog.h>
#include <commproc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <lcd.h>
DECLARE_GLOBAL_DATA_PTR;
int drv_keyboard_init(void)
{
int error = 0;
- device_t kbd_dev;
+ struct stdio_dev kbd_dev;
if (0) {
/* register the keyboard */
- memset (&kbd_dev, 0, sizeof(device_t));
+ memset (&kbd_dev, 0, sizeof(struct stdio_dev));
strcpy(kbd_dev.name, "kbd");
kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
kbd_dev.putc = NULL;
kbd_dev.puts = NULL;
kbd_dev.getc = smc1_getc;
kbd_dev.tstc = smc1_tstc;
- error = device_register (&kbd_dev);
+ error = stdio_register (&kbd_dev);
} else {
lcd_is_enabled = 0;
lcd_disable();
#include <version.h>
#include <stdarg.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <s3c2400.h>
DECLARE_GLOBAL_DATA_PTR;
COBJS-y += circbuf.o
COBJS-y += console.o
COBJS-y += command.o
-COBJS-y += devices.o
COBJS-y += dlmalloc.o
COBJS-y += exports.o
COBJS-$(CONFIG_SYS_HUSH_PARSER) += hush.o
COBJS-y += memsize.o
COBJS-y += s_record.o
COBJS-$(CONFIG_SERIAL_MULTI) += serial.o
+COBJS-y += stdio.o
COBJS-y += xyzModem.o
# core command
*/
#include <common.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
extern void _do_coninfo (void);
int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[])
{
int l;
- struct list_head *list = device_get_list();
+ struct list_head *list = stdio_get_list();
struct list_head *pos;
- device_t *dev;
+ struct stdio_dev *dev;
/* Scan for valid output and input devices */
puts ("List of available devices:\n");
list_for_each(pos, list) {
- dev = list_entry(pos, device_t, list);
+ dev = list_entry(pos, struct stdio_dev, list);
printf ("%-8s %08x %c%c%c ",
dev->name,
flash_info_t *info;
ulong bank;
int i, n, sect_first, sect_last;
-#endif /* CONFIG_SYS_NO_FLASH */
ulong addr_first, addr_last;
- int p;
+#endif /* CONFIG_SYS_NO_FLASH */
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
#endif
- int rcode = 0;
#ifdef CONFIG_HAS_DATAFLASH
int status;
#endif
+ int p;
+ int rcode = 0;
if (argc < 3) {
cmd_usage(cmdtp);
return do_i2c_crc(cmdtp, flag, argc, argv);
if (!strncmp(argv[0], "pr", 2))
return do_i2c_probe(cmdtp, flag, argc, argv);
- if (!strncmp(argv[0], "re", 2))
+ if (!strncmp(argv[0], "re", 2)) {
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 0;
+ }
if (!strncmp(argv[0], "lo", 2))
return do_i2c_loop(cmdtp, flag, argc, argv);
#if defined(CONFIG_CMD_SDRAM)
if (!strncmp(argv[0], "sd", 2))
return do_sdram(cmdtp, flag, argc, argv);
#endif
- else
- cmd_usage(cmdtp);
+ cmd_usage(cmdtp);
return 0;
}
#include <common.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <post.h>
#include <logbuff.h>
int drv_logbuff_init (void)
{
- device_t logdev;
+ struct stdio_dev logdev;
int rc;
/* Device initialization */
logdev.putc = logbuff_putc; /* 'putc' function */
logdev.puts = logbuff_puts; /* 'puts' function */
- rc = device_register (&logdev);
+ rc = stdio_register (&logdev);
return (rc == 0) ? 1 : rc;
}
#include <mmc.h>
#ifndef CONFIG_GENERIC_MMC
-int curr_device = -1;
+static int curr_device = -1;
int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#include <part.h>
#include <sata.h>
-int curr_device = -1;
+int sata_curr_device = -1;
block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
int __sata_initialize(void)
if ((sata_dev_desc[i].lba > 0) && (sata_dev_desc[i].blksz > 0))
init_part(&sata_dev_desc[i]);
}
- curr_device = 0;
+ sata_curr_device = 0;
return rc;
}
int sata_initialize(void) __attribute__((weak,alias("__sata_initialize")));
return sata_initialize();
/* If the user has not yet run `sata init`, do it now */
- if (curr_device == -1)
+ if (sata_curr_device == -1)
if (sata_initialize())
return 1;
}
return 0;
} else if (strncmp(argv[1],"dev", 3) == 0) {
- if ((curr_device < 0) || (curr_device >= CONFIG_SYS_SATA_MAX_DEVICE)) {
+ if ((sata_curr_device < 0) || (sata_curr_device >= CONFIG_SYS_SATA_MAX_DEVICE)) {
puts("\nno SATA devices available\n");
return 1;
}
- printf("\nSATA device %d: ", curr_device);
- dev_print(&sata_dev_desc[curr_device]);
+ printf("\nSATA device %d: ", sata_curr_device);
+ dev_print(&sata_dev_desc[sata_curr_device]);
return 0;
} else if (strncmp(argv[1],"part",4) == 0) {
int dev, ok;
if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN)
return 1;
- curr_device = dev;
+ sata_curr_device = dev;
puts("... is now current device\n");
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nSATA read: device %d block # %ld, count %ld ... ",
- curr_device, blk, cnt);
+ sata_curr_device, blk, cnt);
- n = sata_read(curr_device, blk, cnt, (u32 *)addr);
+ n = sata_read(sata_curr_device, blk, cnt, (u32 *)addr);
/* flush cache after read */
- flush_cache(addr, cnt * sata_dev_desc[curr_device].blksz);
+ flush_cache(addr, cnt * sata_dev_desc[sata_curr_device].blksz);
printf("%ld blocks read: %s\n",
n, (n==cnt) ? "OK" : "ERROR");
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nSATA write: device %d block # %ld, count %ld ... ",
- curr_device, blk, cnt);
+ sata_curr_device, blk, cnt);
- n = sata_write(curr_device, blk, cnt, (u32 *)addr);
+ n = sata_write(sata_curr_device, blk, cnt, (u32 *)addr);
printf("%ld blocks written: %s\n",
n, (n == cnt) ? "OK" : "ERROR");
*/
#include <common.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <serial.h>
int do_terminal(cmd_tbl_t * cmd, int flag, int argc, char *argv[])
{
int last_tilde = 0;
- device_t *dev = NULL;
+ struct stdio_dev *dev = NULL;
if (argc < 1)
return -1;
/* Scan for selected output/input device */
- dev = device_get_by_name(argv[1]);
+ dev = stdio_get_by_name(argv[1]);
if (!dev)
return -1;
#include <common.h>
#include <stdarg.h>
#include <malloc.h>
-#include <console.h>
+#include <stdio_dev.h>
#include <exports.h>
DECLARE_GLOBAL_DATA_PTR;
#endif /* CONFIG_SYS_CONSOLE_IS_IN_ENV */
-static int console_setfile(int file, device_t * dev)
+static int console_setfile(int file, struct stdio_dev * dev)
{
int error = 0;
#if defined(CONFIG_CONSOLE_MUX)
/** Console I/O multiplexing *******************************************/
-static device_t *tstcdev;
-device_t **console_devices[MAX_FILES];
+static struct stdio_dev *tstcdev;
+struct stdio_dev **console_devices[MAX_FILES];
int cd_count[MAX_FILES];
/*
static int console_tstc(int file)
{
int i, ret;
- device_t *dev;
+ struct stdio_dev *dev;
disable_ctrlc(1);
for (i = 0; i < cd_count[file]; i++) {
static void console_putc(int file, const char c)
{
int i;
- device_t *dev;
+ struct stdio_dev *dev;
for (i = 0; i < cd_count[file]; i++) {
dev = console_devices[file][i];
static void console_puts(int file, const char *s)
{
int i;
- device_t *dev;
+ struct stdio_dev *dev;
for (i = 0; i < cd_count[file]; i++) {
dev = console_devices[file][i];
iomux_printdevs(file);
}
-static inline void console_doenv(int file, device_t *dev)
+static inline void console_doenv(int file, struct stdio_dev *dev)
{
iomux_doenv(file, dev->name);
}
printf("%s\n", stdio_devices[file]->name);
}
-static inline void console_doenv(int file, device_t *dev)
+static inline void console_doenv(int file, struct stdio_dev *dev)
{
console_setfile(file, dev);
}
/** U-Boot INIT FUNCTIONS *************************************************/
-device_t *search_device(int flags, char *name)
+struct stdio_dev *search_device(int flags, char *name)
{
- device_t *dev;
+ struct stdio_dev *dev;
- dev = device_get_by_name(name);
+ dev = stdio_get_by_name(name);
if (dev && (dev->flags & flags))
return dev;
int console_assign(int file, char *devname)
{
int flag;
- device_t *dev;
+ struct stdio_dev *dev;
/* Check for valid file */
switch (file) {
int console_init_r(void)
{
char *stdinname, *stdoutname, *stderrname;
- device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
+ struct stdio_dev *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
#ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
int i;
#endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */
/* Called after the relocation - use desired console functions */
int console_init_r(void)
{
- device_t *inputdev = NULL, *outputdev = NULL;
+ struct stdio_dev *inputdev = NULL, *outputdev = NULL;
int i;
- struct list_head *list = device_get_list();
+ struct list_head *list = stdio_get_list();
struct list_head *pos;
- device_t *dev;
+ struct stdio_dev *dev;
#ifdef CONFIG_SPLASH_SCREEN
/*
/* Scan devices looking for input and output devices */
list_for_each(pos, list) {
- dev = list_entry(pos, device_t, list);
+ dev = list_entry(pos, struct stdio_dev, list);
if ((dev->flags & DEV_FLAGS_INPUT) && (inputdev == NULL)) {
inputdev = dev;
void iomux_printdevs(const int console)
{
int i;
- device_t *dev;
+ struct stdio_dev *dev;
for (i = 0; i < cd_count[console]; i++) {
dev = console_devices[console][i];
{
char *console_args, *temp, **start;
int i, j, k, io_flag, cs_idx, repeat;
- device_t *dev;
- device_t **cons_set;
+ struct stdio_dev *dev;
+ struct stdio_dev **cons_set;
console_args = strdup(arg);
if (console_args == NULL)
*temp = '\0';
start[i] = temp + 1;
}
- cons_set = (device_t **)calloc(i, sizeof(device_t *));
+ cons_set = (struct stdio_dev **)calloc(i, sizeof(struct stdio_dev *));
if (cons_set == NULL) {
free(start);
free(console_args);
} else {
/* Works even if console_devices[console] is NULL. */
console_devices[console] =
- (device_t **)realloc(console_devices[console],
- cs_idx * sizeof(device_t *));
+ (struct stdio_dev **)realloc(console_devices[console],
+ cs_idx * sizeof(struct stdio_dev *));
if (console_devices[console] == NULL) {
free(cons_set);
return 1;
}
memcpy(console_devices[console], cons_set, cs_idx *
- sizeof(device_t *));
+ sizeof(struct stdio_dev *));
cd_count[console] = cs_idx;
}
#include <command.h>
#include <stdarg.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#if defined(CONFIG_POST)
#include <post.h>
#endif
int drv_lcd_init (void)
{
- device_t lcddev;
+ struct stdio_dev lcddev;
int rc;
lcd_base = (void *)(gd->fb_base);
lcddev.putc = lcd_putc; /* 'putc' function */
lcddev.puts = lcd_puts; /* 'puts' function */
- rc = device_register (&lcddev);
+ rc = stdio_register (&lcddev);
return (rc == 0) ? 1 : rc;
}
* Display the BMP file located at address bmp_image.
* Only uncompressed.
*/
+
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+#define BMP_ALIGN_CENTER 0x7FFF
+#endif
+
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
#if !defined(CONFIG_MCC200)
#endif
padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
+
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ if (x == BMP_ALIGN_CENTER)
+ x = max(0, (pwidth - width) / 2);
+ else if (x < 0)
+ x = max(0, pwidth - width + x + 1);
+
+ if (y == BMP_ALIGN_CENTER)
+ y = max(0, (panel_info.vl_row - height) / 2);
+ else if (y < 0)
+ y = max(0, panel_info.vl_row - height + y + 1);
+#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
+
if ((x + width)>pwidth)
width = pwidth - x;
if ((y + height)>panel_info.vl_row)
static int do_splash = 1;
if (do_splash && (s = getenv("splashimage")) != NULL) {
- addr = simple_strtoul(s, NULL, 16);
+ int x = 0, y = 0;
do_splash = 0;
+ addr = simple_strtoul (s, NULL, 16);
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ if ((s = getenv ("splashpos")) != NULL) {
+ if (s[0] == 'm')
+ x = BMP_ALIGN_CENTER;
+ else
+ x = simple_strtol (s, NULL, 0);
+
+ if ((s = strchr (s + 1, ',')) != NULL) {
+ if (s[1] == 'm')
+ y = BMP_ALIGN_CENTER;
+ else
+ y = simple_strtol (s + 1, NULL, 0);
+ }
+ }
+#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
+
#ifdef CONFIG_VIDEO_BMP_GZIP
bmp_image_t *bmp = (bmp_image_t *)addr;
unsigned long len;
}
#endif
- if (lcd_display_bitmap (addr, 0, 0) == 0) {
+ if (lcd_display_bitmap (addr, x, y) == 0) {
return ((void *)lcd_base);
}
}
#include <common.h>
#include <serial.h>
-#include <devices.h>
+#include <stdio_dev.h>
DECLARE_GLOBAL_DATA_PTR;
serial_assign (default_serial_console ()->name);
}
-void serial_devices_init (void)
+void serial_stdio_init (void)
{
- device_t dev;
+ struct stdio_dev dev;
struct serial_device *s = serial_devices;
while (s) {
dev.getc = s->getc;
dev.tstc = s->tstc;
- device_register (&dev);
+ stdio_register (&dev);
s = s->next;
}
#include <common.h>
#include <stdarg.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <serial.h>
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
DECLARE_GLOBAL_DATA_PTR;
-static device_t devs;
-device_t *stdio_devices[] = { NULL, NULL, NULL };
+static struct stdio_dev devs;
+struct stdio_dev *stdio_devices[] = { NULL, NULL, NULL };
char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
#if defined(CONFIG_SPLASH_SCREEN) && !defined(CONFIG_SYS_DEVICE_NULLDEV)
static void drv_system_init (void)
{
- device_t dev;
+ struct stdio_dev dev;
memset (&dev, 0, sizeof (dev));
dev.tstc = serial_tstc;
#endif
- device_register (&dev);
+ stdio_register (&dev);
#ifdef CONFIG_SYS_DEVICE_NULLDEV
memset (&dev, 0, sizeof (dev));
dev.getc = nulldev_input;
dev.tstc = nulldev_input;
- device_register (&dev);
+ stdio_register (&dev);
#endif
}
* DEVICES
**************************************************************************
*/
-struct list_head* device_get_list(void)
+struct list_head* stdio_get_list(void)
{
return &(devs.list);
}
-device_t* device_get_by_name(char* name)
+struct stdio_dev* stdio_get_by_name(char* name)
{
struct list_head *pos;
- device_t *dev;
+ struct stdio_dev *dev;
if(!name)
return NULL;
list_for_each(pos, &(devs.list)) {
- dev = list_entry(pos, device_t, list);
+ dev = list_entry(pos, struct stdio_dev, list);
if(strcmp(dev->name, name) == 0)
return dev;
}
return NULL;
}
-device_t* device_clone(device_t *dev)
+struct stdio_dev* stdio_clone(struct stdio_dev *dev)
{
- device_t *_dev;
+ struct stdio_dev *_dev;
if(!dev)
return NULL;
- _dev = calloc(1, sizeof(device_t));
+ _dev = calloc(1, sizeof(struct stdio_dev));
if(!_dev)
return NULL;
- memcpy(_dev, dev, sizeof(device_t));
+ memcpy(_dev, dev, sizeof(struct stdio_dev));
strncpy(_dev->name, dev->name, 16);
return _dev;
}
-int device_register (device_t * dev)
+int stdio_register (struct stdio_dev * dev)
{
- device_t *_dev;
+ struct stdio_dev *_dev;
- _dev = device_clone(dev);
+ _dev = stdio_clone(dev);
if(!_dev)
return -1;
list_add_tail(&(_dev->list), &(devs.list));
/* deregister the device "devname".
* returns 0 if success, -1 if device is assigned and 1 if devname not found
*/
-#ifdef CONFIG_SYS_DEVICE_DEREGISTER
-int device_deregister(char *devname)
+#ifdef CONFIG_SYS_STDIO_DEREGISTER
+int stdio_deregister(char *devname)
{
int l;
struct list_head *pos;
- device_t *dev;
+ struct stdio_dev *dev;
char temp_names[3][8];
- dev = device_get_by_name(devname);
+ dev = stdio_get_by_name(devname);
if(!dev) /* device not found */
return -1;
/* reassign Device list */
list_for_each(pos, &(devs.list)) {
- dev = list_entry(pos, device_t, list);
+ dev = list_entry(pos, struct stdio_dev, list);
for (l=0 ; l< MAX_FILES; l++) {
if(strcmp(dev->name, temp_names[l]) == 0)
stdio_devices[l] = dev;
}
return 0;
}
-#endif /* CONFIG_SYS_DEVICE_DEREGISTER */
+#endif /* CONFIG_SYS_STDIO_DEREGISTER */
-int devices_init (void)
+int stdio_init (void)
{
#ifndef CONFIG_ARM /* already relocated for current ARM implementation */
ulong relocation_offset = gd->reloc_off;
#endif
drv_system_init ();
#ifdef CONFIG_SERIAL_MULTI
- serial_devices_init ();
+ serial_stdio_init ();
#endif
#ifdef CONFIG_USB_TTY
drv_usbtty_init ();
*
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <asm/byteorder.h>
#include <usb.h>
int drv_usb_kbd_init(void)
{
int error,i;
- device_t usb_kbd_dev,*old_dev;
+ struct stdio_dev usb_kbd_dev,*old_dev;
struct usb_device *dev;
char *stdinname = getenv ("stdin");
if(usb_kbd_probe(dev,0)==1) { /* Ok, we found a keyboard */
/* check, if it is already registered */
USB_KBD_PRINTF("USB KBD found set up device.\n");
- old_dev = device_get_by_name(DEVNAME);
+ old_dev = stdio_get_by_name(DEVNAME);
if(old_dev) {
/* ok, already registered, just return ok */
USB_KBD_PRINTF("USB KBD is already registered.\n");
}
/* register the keyboard */
USB_KBD_PRINTF("USB KBD register.\n");
- memset (&usb_kbd_dev, 0, sizeof(device_t));
+ memset (&usb_kbd_dev, 0, sizeof(struct stdio_dev));
strcpy(usb_kbd_dev.name, DEVNAME);
usb_kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
usb_kbd_dev.putc = NULL;
usb_kbd_dev.getc = usb_kbd_getc;
usb_kbd_dev.tstc = usb_kbd_testc;
usb_kbd_dev.priv = (void *)dev;
- error = device_register (&usb_kbd_dev);
+ error = stdio_register (&usb_kbd_dev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
/* deregistering the keyboard */
int usb_kbd_deregister(void)
{
-#ifdef CONFIG_SYS_DEVICE_DEREGISTER
- return device_deregister(DEVNAME);
+#ifdef CONFIG_SYS_STDIO_DEREGISTER
+ return stdio_deregister(DEVNAME);
#else
return 1;
#endif
endif
endif
-ifeq ($(PCI_CLOCK),PCI_66M)
-CFLAGS := $(CFLAGS) -DPCI_66M
-endif
-
#########################################################################
export HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
#include <command.h>
#include <asm/system.h>
#include <asm/cache.h>
+#ifndef CONFIG_L2_OFF
+#include <asm/arch/sys_proto.h>
+#endif
static void cache_flush(void);
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <asm/blackfin.h>
#ifndef CONFIG_JTAG_CONSOLE_TIMEOUT
int drv_jtag_console_init(void)
{
- device_t dev;
+ struct stdio_dev dev;
int ret;
memset(&dev, 0x00, sizeof(dev));
dev.tstc = jtag_tstc;
dev.getc = jtag_getc;
- ret = device_register(&dev);
+ ret = stdio_register(&dev);
return (ret == 0 ? 1 : ret);
}
#include "../../board/freescale/common/fsl_diu_fb.h"
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-#include <devices.h>
+#include <stdio_dev.h>
#include <video_fb.h>
#endif
#include <stdarg.h>
#include <lcdvideo.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#if defined(CONFIG_POST)
#include <post.h>
#endif
#include <timestamp.h>
#include <i2c.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#ifdef CONFIG_VIDEO
{
int error, devices = 1;
- device_t videodev;
+ struct stdio_dev videodev;
video_init ((void *)(gd->fb_base)); /* Video initialization */
videodev.putc = video_putc; /* 'putc' function */
videodev.puts = video_puts; /* 'puts' function */
- error = device_register (&videodev);
+ error = stdio_register (&videodev);
return (error == 0) ? devices : error;
}
#include <version.h>
#include <stdarg.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <lcd.h>
#include <asm/arch/pxa-regs.h>
#include <ata.h>
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
-extern int curr_device;
+extern int sata_curr_device;
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
dev_print (&sata_dev_desc[devno]);
/* initialize partition type */
init_part (&sata_dev_desc[devno]);
- if (curr_device < 0)
- curr_device =
+ if (sata_curr_device < 0)
+ sata_curr_device =
i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
}
}
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <keyboard.h>
#undef KBG_DEBUG
int kbd_init (void)
{
int error;
- device_t kbddev ;
+ struct stdio_dev kbddev ;
char *stdinname = getenv ("stdin");
if(kbd_init_hw()==-1)
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = stdio_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
#include <common.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
int drv_nc_init (void)
{
- device_t dev;
+ struct stdio_dev dev;
int rc;
memset (&dev, 0, sizeof (dev));
dev.getc = nc_getc;
dev.tstc = nc_tstc;
- rc = device_register (&dev);
+ rc = stdio_register (&dev);
return (rc == 0) ? 1 : rc;
}
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#if defined(CONFIG_CPU_V6)
/*
}
#ifdef CONFIG_ARM_DCC_MULTI
-static device_t arm_dcc_dev;
+static struct stdio_dev arm_dcc_dev;
int drv_arm_dcc_init(void)
{
arm_dcc_dev.putc = arm_dcc_putc; /* 'putc' function */
arm_dcc_dev.puts = arm_dcc_puts; /* 'puts' function */
- return device_register(&arm_dcc_dev);
+ return stdio_register(&arm_dcc_dev);
}
#endif
#include <common.h>
#include <config.h>
#include <circbuf.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include "usbtty.h"
#include "usb_cdc_acm.h"
#include "usbdescriptors.h"
/*
* Instance variables
*/
-static device_t usbttydev;
+static struct stdio_dev usbttydev;
static struct usb_device_instance device_instance[1];
static struct usb_bus_instance bus_instance[1];
static struct usb_configuration_instance config_instance[NUM_CONFIGS];
usbttydev.putc = usbtty_putc; /* 'putc' function */
usbttydev.puts = usbtty_puts; /* 'puts' function */
- rc = device_register (&usbttydev);
+ rc = stdio_register (&usbttydev);
return (rc == 0) ? 1 : rc;
}
*/
void usb_event_poll()
{
- device_t *dev;
+ struct stdio_dev *dev;
struct usb_device *usb_kbd_dev;
struct usb_interface_descriptor *iface;
struct usb_endpoint_descriptor *ep;
int maxp;
/* Get the pointer to USB Keyboard device pointer */
- dev = device_get_by_name("usbkbd");
+ dev = stdio_get_by_name("usbkbd");
usb_kbd_dev = (struct usb_device *)dev->priv;
iface = &usb_kbd_dev->config.if_desc[0];
ep = &iface->ep_desc[0];
#include "musb_core.h"
#ifdef CONFIG_USB_KEYBOARD
-#include <devices.h>
+#include <stdio_dev.h>
extern unsigned char new[];
#endif
#include <version.h>
#include <linux/types.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <video_font.h>
#if defined(CONFIG_CMD_DATE)
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
#include <watchdog.h>
#include <bmp_layout.h>
+
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+#define BMP_ALIGN_CENTER 0x7FFF
+#endif
+
#endif
/*****************************************************************************/
padded_line = (((width * bpp + 7) / 8) + 3) & ~0x3;
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ if (x == BMP_ALIGN_CENTER)
+ x = max(0, (VIDEO_VISIBLE_COLS - width) / 2);
+ else if (x < 0)
+ x = max(0, VIDEO_VISIBLE_COLS - width + x + 1);
+
+ if (y == BMP_ALIGN_CENTER)
+ y = max(0, (VIDEO_VISIBLE_ROWS - height) / 2);
+ else if (y < 0)
+ y = max(0, VIDEO_VISIBLE_ROWS - height + y + 1);
+#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
+
if ((x + width) > VIDEO_VISIBLE_COLS)
width = VIDEO_VISIBLE_COLS - x;
if ((y + height) > VIDEO_VISIBLE_ROWS)
ulong addr;
if ((s = getenv ("splashimage")) != NULL) {
+ int x = 0, y = 0;
+
addr = simple_strtoul (s, NULL, 16);
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ if ((s = getenv ("splashpos")) != NULL) {
+ if (s[0] == 'm')
+ x = BMP_ALIGN_CENTER;
+ else
+ x = simple_strtol (s, NULL, 0);
+
+ if ((s = strchr (s + 1, ',')) != NULL) {
+ if (s[1] == 'm')
+ y = BMP_ALIGN_CENTER;
+ else
+ y = simple_strtol (s + 1, NULL, 0);
+ }
+ }
+#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
- if (video_display_bitmap (addr, 0, 0) == 0) {
+ if (video_display_bitmap (addr, x, y) == 0) {
return ((void *) (video_fb_address));
}
}
int drv_video_init (void)
{
int skip_dev_init;
- device_t console_dev;
+ struct stdio_dev console_dev;
/* Check if video initialization should be skipped */
if (board_video_skip())
console_dev.getc = VIDEO_GETC_FCT; /* 'getc' function */
#endif /* CONFIG_VGA_AS_SINGLE_DEVICE */
- if (device_register (&console_dev) != 0)
+ if (stdio_register (&console_dev) != 0)
return 0;
/* Return success */
#if defined(CONFIG_POST)
#include <post.h>
#endif
+
/*
* Graphic Device
*/
#define rd_io in32r
#define wr_io out32r
#else
-#define rd_io(addr) in_be32((volatile unsigned*)(addr))
-#define wr_io(addr,val) out_be32((volatile unsigned*)(addr), (val))
+#define rd_io(addr) in_be32((volatile unsigned *)(addr))
+#define wr_io(addr, val) out_be32((volatile unsigned *)(addr), (val))
#endif
-#define HOST_RD_REG(off) rd_io((pGD->frameAdrs + 0x01fc0000 + (off)))
-#define HOST_WR_REG(off, val) wr_io((pGD->frameAdrs + 0x01fc0000 + (off)), (val))
-#define DISP_RD_REG(off) rd_io((pGD->frameAdrs + 0x01fd0000 + (off)))
-#define DISP_WR_REG(off, val) wr_io((pGD->frameAdrs + 0x01fd0000 + (off)), (val))
-#define DE_RD_REG(off) rd_io((pGD->dprBase + (off)))
-#define DE_WR_REG(off, val) wr_io((pGD->dprBase + (off)), (val))
+#define HOST_RD_REG(off) rd_io((dev->frameAdrs + GC_HOST_BASE + (off)))
+#define HOST_WR_REG(off, val) wr_io((dev->frameAdrs + GC_HOST_BASE + (off)), \
+ (val))
+#define DISP_RD_REG(off) rd_io((dev->frameAdrs + GC_DISP_BASE + (off)))
+#define DISP_WR_REG(off, val) wr_io((dev->frameAdrs + GC_DISP_BASE + (off)), \
+ (val))
+#define DE_RD_REG(off) rd_io((dev->dprBase + (off)))
+#define DE_WR_REG(off, val) wr_io((dev->dprBase + (off)), (val))
#if defined(CONFIG_VIDEO_CORALP)
-#define DE_WR_FIFO(val) wr_io((pGD->dprBase + (0x8400)), (val))
+#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_GEO_FIFO)), (val))
#else
-#define DE_WR_FIFO(val) wr_io((pGD->dprBase + (0x04a0)), (val))
+#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_FIFO)), (val))
#endif
-#define L0PAL_RD_REG(idx, val) rd_io((pGD->frameAdrs + 0x01fd0400 + ((idx)<<2)))
-#define L0PAL_WR_REG(idx, val) wr_io((pGD->frameAdrs + 0x01fd0400 + ((idx)<<2)), (val))
-#define L1PAL_RD_REG(idx, val) rd_io((pGD->frameAdrs + 0x01fd0800 + ((idx)<<2)))
-#define L1PAL_WR_REG(idx, val) wr_io((pGD->frameAdrs + 0x01fd0800 + ((idx)<<2)), (val))
-#define L2PAL_RD_REG(idx, val) rd_io((pGD->frameAdrs + 0x01fd1000 + ((idx)<<2)))
-#define L2PAL_WR_REG(idx, val) wr_io((pGD->frameAdrs + 0x01fd1000 + ((idx)<<2)), (val))
-#define L3PAL_RD_REG(idx, val) rd_io((pGD->frameAdrs + 0x01fd1400 + ((idx)<<2)))
-#define L3PAL_WR_REG(idx, val) wr_io((pGD->frameAdrs + 0x01fd1400 + ((idx)<<2)), (val))
+#define L0PAL_WR_REG(idx, val) wr_io((dev->frameAdrs + \
+ (GC_DISP_BASE | GC_L0PAL0) + \
+ ((idx) << 2)), (val))
-static void gdc_sw_reset(void)
+static void gdc_sw_reset (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
- HOST_WR_REG (0x002c, 0x00000001);
+ GraphicDevice *dev = &mb862xx;
+
+ HOST_WR_REG (GC_SRST, 0x1);
udelay (500);
video_hw_init ();
}
-static void de_wait(void)
+static void de_wait (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
int lc = 0x10000;
- /* Sync with software writes to framebuffer,
- try to reset if engine locked */
- while (DE_RD_REG (0x0400) & 0x00000131)
+ /*
+ * Sync with software writes to framebuffer,
+ * try to reset if engine locked
+ */
+ while (DE_RD_REG (GC_CTR) & 0x00000131)
if (lc-- < 0) {
gdc_sw_reset ();
- printf ("gdc reset done after drawing engine lock...\n");
+ puts ("gdc reset done after drawing engine lock.\n");
break;
}
}
-static void de_wait_slots(int slots)
+static void de_wait_slots (int slots)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
int lc = 0x10000;
/* Wait for free fifo slots */
- while (DE_RD_REG (0x0408) < slots)
+ while (DE_RD_REG (GC_IFCNT) < slots)
if (lc-- < 0) {
gdc_sw_reset ();
- printf ("gdc reset done after drawing engine lock...\n");
+ puts ("gdc reset done after drawing engine lock.\n");
break;
}
}
#if !defined(CONFIG_VIDEO_CORALP)
-static void board_disp_init(void)
+static void board_disp_init (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
const gdc_regs *regs = board_get_regs ();
while (regs->index) {
*/
static void de_init (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
- int cf = (pGD->gdfBytesPP == 1) ? 0x0000 : 0x8000;
+ GraphicDevice *dev = &mb862xx;
+ int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
- pGD->dprBase = pGD->frameAdrs + 0x01ff0000;
+ dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
/* Setup mode and fbbase, xres, fg, bg */
de_wait_slots (2);
DE_WR_FIFO (0xf1010108);
DE_WR_FIFO (cf | 0x0300);
- DE_WR_REG (0x0440, 0x0000);
- DE_WR_REG (0x0444, pGD->winSizeX);
- DE_WR_REG (0x0480, 0x0000);
- DE_WR_REG (0x0484, 0x0000);
+ DE_WR_REG (GC_FBR, 0x0);
+ DE_WR_REG (GC_XRES, dev->winSizeX);
+ DE_WR_REG (GC_FC, 0x0);
+ DE_WR_REG (GC_BC, 0x0);
/* Reset clipping */
- DE_WR_REG (0x0454, 0x0000);
- DE_WR_REG (0x0458, pGD->winSizeX);
- DE_WR_REG (0x045c, 0x0000);
- DE_WR_REG (0x0460, pGD->winSizeY);
+ DE_WR_REG (GC_CXMIN, 0x0);
+ DE_WR_REG (GC_CXMAX, dev->winSizeX);
+ DE_WR_REG (GC_CYMIN, 0x0);
+ DE_WR_REG (GC_CYMAX, dev->winSizeY);
/* Clear framebuffer using drawing engine */
de_wait_slots (3);
DE_WR_FIFO (0x09410000);
DE_WR_FIFO (0x00000000);
- DE_WR_FIFO (pGD->winSizeY<<16 | pGD->winSizeX);
+ DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
/* sync with SW access to framebuffer */
de_wait ();
}
#if defined(CONFIG_VIDEO_CORALP)
-unsigned int pci_video_init(void)
+unsigned int pci_video_init (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
pci_dev_t devbusfn;
- if ((devbusfn = pci_find_devices(supported, 0)) < 0)
- {
- printf ("PCI video controller not found!\n");
+ if ((devbusfn = pci_find_devices (supported, 0)) < 0) {
+ puts ("PCI video controller not found!\n");
return 0;
}
/* PCI setup */
- pci_write_config_dword (devbusfn, PCI_COMMAND, (PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
- pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &pGD->frameAdrs);
- pGD->frameAdrs = pci_mem_to_phys (devbusfn, pGD->frameAdrs);
+ pci_write_config_dword (devbusfn, PCI_COMMAND,
+ (PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &dev->frameAdrs);
+ dev->frameAdrs = pci_mem_to_phys (devbusfn, dev->frameAdrs);
- if (pGD->frameAdrs == 0) {
- printf ("PCI config: failed to get base address\n");
+ if (dev->frameAdrs == 0) {
+ puts ("PCI config: failed to get base address\n");
return 0;
}
- pGD->pciBase = pGD->frameAdrs;
+ dev->pciBase = dev->frameAdrs;
/* Setup clocks and memory mode for Coral-P Eval. Board */
- HOST_WR_REG (0x0038, 0x00090000);
+ HOST_WR_REG (GC_CCF, 0x00090000);
udelay (200);
- HOST_WR_REG (0xfffc, 0x11d7fa13);
+ HOST_WR_REG (GC_MMR, 0x11d7fa13);
udelay (100);
- return pGD->frameAdrs;
+ return dev->frameAdrs;
}
unsigned int card_init (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
unsigned int cf, videomode, div = 0;
unsigned long t1, hsync, vsync;
char *penv;
struct ctfb_res_modes *res_mode;
struct ctfb_res_modes var_mode;
- memset (pGD, 0, sizeof (GraphicDevice));
+ memset (dev, 0, sizeof (GraphicDevice));
- if (!pci_video_init ()) {
+ if (!pci_video_init ())
return 0;
- }
- printf ("CoralP\n");
+ puts ("CoralP\n");
tmp = 0;
videomode = 0x310;
/* get video mode via environment */
if ((penv = getenv ("videomode")) != NULL) {
- /* deceide if it is a string */
+ /* decide if it is a string */
if (penv[0] <= '9') {
videomode = (int) simple_strtoul (penv, NULL, 16);
tmp = 1;
} else {
tmp = 1;
}
+
if (tmp) {
- /* parameter are vesa modes */
- /* search params */
+ /* parameter are vesa modes, search params */
for (i = 0; i < VESA_MODES_COUNT; i++) {
if (vesa_modes[i].vesanr == videomode)
break;
}
if (i == VESA_MODES_COUNT) {
- printf ("\tno VESA Mode found, switching to mode 0x%x \n", videomode);
+ printf ("\tno VESA Mode found, fallback to mode 0x%x\n",
+ videomode);
i = 0;
}
- res_mode =
- (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].resindex];
+ res_mode = (struct ctfb_res_modes *)
+ &res_mode_init[vesa_modes[i].resindex];
if (vesa_modes[i].resindex > 2) {
- printf ("\tUnsupported resolution, switching to default\n");
+ puts ("\tUnsupported resolution, using default\n");
bpp = vesa_modes[1].bits_per_pixel;
div = fr_div[1];
}
bpp = vesa_modes[i].bits_per_pixel;
div = fr_div[vesa_modes[i].resindex];
} else {
-
res_mode = (struct ctfb_res_modes *) &var_mode;
bpp = video_get_params (res_mode, penv);
}
vsync = 1000000000L / t1;
/* fill in Graphic device struct */
- sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
+ sprintf (dev->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
res_mode->yres, bpp, (hsync / 1000), (vsync / 1000));
- printf ("\t%s\n", pGD->modeIdent);
- pGD->winSizeX = res_mode->xres;
- pGD->winSizeY = res_mode->yres;
- pGD->memSize = VIDEO_MEM_SIZE;
+ printf ("\t%s\n", dev->modeIdent);
+ dev->winSizeX = res_mode->xres;
+ dev->winSizeY = res_mode->yres;
+ dev->memSize = VIDEO_MEM_SIZE;
switch (bpp) {
case 8:
- pGD->gdfIndex = GDF__8BIT_INDEX;
- pGD->gdfBytesPP = 1;
+ dev->gdfIndex = GDF__8BIT_INDEX;
+ dev->gdfBytesPP = 1;
break;
case 15:
case 16:
- pGD->gdfIndex = GDF_15BIT_555RGB;
- pGD->gdfBytesPP = 2;
+ dev->gdfIndex = GDF_15BIT_555RGB;
+ dev->gdfBytesPP = 2;
break;
default:
- printf ("\t%d bpp configured, but only 8,15 and 16 supported.\n", bpp);
- printf ("\tSwitching back to 15bpp\n");
- pGD->gdfIndex = GDF_15BIT_555RGB;
- pGD->gdfBytesPP = 2;
+ printf ("\t%d bpp configured, but only 8,15 and 16 supported\n",
+ bpp);
+ puts ("\tfallback to 15bpp\n");
+ dev->gdfIndex = GDF_15BIT_555RGB;
+ dev->gdfBytesPP = 2;
}
/* Setup dot clock (internal pll, division rate) */
- DISP_WR_REG (0x0100, div);
+ DISP_WR_REG (GC_DCM1, div);
/* L0 init */
- cf = (pGD->gdfBytesPP == 1) ? 0x00000000 : 0x80000000;
- DISP_WR_REG (0x0020, ((pGD->winSizeX * pGD->gdfBytesPP)/64)<<16 |
- (pGD->winSizeY-1) |
- cf);
- DISP_WR_REG (0x0024, 0x00000000);
- DISP_WR_REG (0x0028, 0x00000000);
- DISP_WR_REG (0x002c, 0x00000000);
- DISP_WR_REG (0x0110, 0x00000000);
- DISP_WR_REG (0x0114, 0x00000000);
- DISP_WR_REG (0x0118, (pGD->winSizeY-1)<<16 | pGD->winSizeX);
+ cf = (dev->gdfBytesPP == 1) ? 0x00000000 : 0x80000000;
+ DISP_WR_REG (GC_L0M, ((dev->winSizeX * dev->gdfBytesPP) / 64) << 16 |
+ (dev->winSizeY - 1) | cf);
+ DISP_WR_REG (GC_L0OA0, 0x0);
+ DISP_WR_REG (GC_L0DA0, 0x0);
+ DISP_WR_REG (GC_L0DY_L0DX, 0x0);
+ DISP_WR_REG (GC_L0EM, 0x0);
+ DISP_WR_REG (GC_L0WY_L0WX, 0x0);
+ DISP_WR_REG (GC_L0WH_L0WW, (dev->winSizeY - 1) << 16 | dev->winSizeX);
/* Display timing init */
- DISP_WR_REG (0x0004, (pGD->winSizeX+res_mode->left_margin+res_mode->right_margin+res_mode->hsync_len-1)<<16);
- DISP_WR_REG (0x0008, (pGD->winSizeX-1) << 16 | (pGD->winSizeX-1));
- DISP_WR_REG (0x000c, (res_mode->vsync_len-1)<<24|(res_mode->hsync_len-1)<<16|(pGD->winSizeX+res_mode->right_margin-1));
- DISP_WR_REG (0x0010, (pGD->winSizeY+res_mode->lower_margin+res_mode->upper_margin+res_mode->vsync_len-1)<<16);
- DISP_WR_REG (0x0014, (pGD->winSizeY-1) << 16 | (pGD->winSizeY+res_mode->lower_margin-1));
- DISP_WR_REG (0x0018, 0x00000000);
- DISP_WR_REG (0x001c, pGD->winSizeY << 16 | pGD->winSizeX);
+ DISP_WR_REG (GC_HTP_A, (dev->winSizeX +
+ res_mode->left_margin +
+ res_mode->right_margin +
+ res_mode->hsync_len - 1) << 16);
+ DISP_WR_REG (GC_HDB_HDP_A, (dev->winSizeX - 1) << 16 |
+ (dev->winSizeX - 1));
+ DISP_WR_REG (GC_VSW_HSW_HSP_A, (res_mode->vsync_len - 1) << 24 |
+ (res_mode->hsync_len - 1) << 16 |
+ (dev->winSizeX +
+ res_mode->right_margin - 1));
+ DISP_WR_REG (GC_VTR_A, (dev->winSizeY + res_mode->lower_margin +
+ res_mode->upper_margin +
+ res_mode->vsync_len - 1) << 16);
+ DISP_WR_REG (GC_VDP_VSP_A, (dev->winSizeY-1) << 16 |
+ (dev->winSizeY +
+ res_mode->lower_margin - 1));
+ DISP_WR_REG (GC_WY_WX, 0x0);
+ DISP_WR_REG (GC_WH_WW, dev->winSizeY << 16 | dev->winSizeX);
/* Display enable, L0 layer */
- DISP_WR_REG (0x0100, 0x80010000 | div);
+ DISP_WR_REG (GC_DCM1, 0x80010000 | div);
- return pGD->frameAdrs;
+ return dev->frameAdrs;
}
#endif
void *video_hw_init (void)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
- printf ("Video: Fujitsu ");
+ puts ("Video: Fujitsu ");
- memset (pGD, 0, sizeof (GraphicDevice));
+ memset (dev, 0, sizeof (GraphicDevice));
#if defined(CONFIG_VIDEO_CORALP)
- if (card_init () == 0) {
- return (NULL);
- }
+ if (card_init () == 0)
+ return NULL;
#else
- /* Preliminary init of the onboard graphic controller,
- retrieve base address */
- if ((pGD->frameAdrs = board_video_init ()) == 0) {
- printf ("Controller not found!\n");
- return (NULL);
+ /*
+ * Preliminary init of the onboard graphic controller,
+ * retrieve base address
+ */
+ if ((dev->frameAdrs = board_video_init ()) == 0) {
+ puts ("Controller not found!\n");
+ return NULL;
} else
- printf("Lime\n");
+ puts ("Lime\n");
#endif
de_init ();
#if !defined(CONFIG_VIDEO_CORALP)
- board_disp_init();
+ board_disp_init ();
#endif
#if (defined(CONFIG_LWMON5) || \
board_backlight_switch (1);
#endif
- return pGD;
+ return dev;
}
/*
* Set a RGB color in the LUT
*/
-void video_set_lut (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
+void video_set_lut (unsigned int index, unsigned char r,
+ unsigned char g, unsigned char b)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
}
/*
* Drawing engine Fill and BitBlt screen region
*/
-void video_hw_rectfill (unsigned int bpp, unsigned int dst_x, unsigned int dst_y,
- unsigned int dim_x, unsigned int dim_y, unsigned int color)
+void video_hw_rectfill (unsigned int bpp, unsigned int dst_x,
+ unsigned int dst_y, unsigned int dim_x,
+ unsigned int dim_y, unsigned int color)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
de_wait_slots (3);
- DE_WR_REG (0x0480, color);
+ DE_WR_REG (GC_FC, color);
DE_WR_FIFO (0x09410000);
DE_WR_FIFO ((dst_y << 16) | dst_x);
DE_WR_FIFO ((dim_y << 16) | dim_x);
de_wait ();
}
-void video_hw_bitblt (unsigned int bpp, unsigned int src_x, unsigned int src_y,
- unsigned int dst_x, unsigned int dst_y, unsigned int width,
+void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
+ unsigned int src_y, unsigned int dst_x,
+ unsigned int dst_y, unsigned int width,
unsigned int height)
{
- GraphicDevice *pGD = (GraphicDevice *)&mb862xx;
+ GraphicDevice *dev = &mb862xx;
unsigned int ctrl = 0x0d000000L;
if (src_x >= dst_x && src_y >= dst_y)
I think this is a symptom of a bug in mb-gcc. JW 20040303
*/
-static __inline__ __const__ __u16 ___arch__swab16 (__u16 half_word)
+
+
+static __inline__ __u16 ___arch__swab16 (__u16 half_word)
{
/* 32 bit temp to cast result, forcing clearing of high word */
__u32 temp;
#endif
#endif
-#ifndef CONFIG_FSL_DMA
-#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \
- !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \
- (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)))
+/* Check if boards need to enable FSL DMA engine for SDRAM init */
+#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
+#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
+ ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
+ !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
#define CONFIG_FSL_DMA
#endif
#endif
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_SAVEENV /* saveenv */
-#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#define CONFIG_CMD_IMLS /* List all found images */
#endif
-#define CONFIG_CMD_ITEST /* Integer (and string) test */
#define CONFIG_CMD_LOADB /* loadb */
#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_CMD_NFS /* NFS support */
#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
-#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
-#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
+#define CONFIG_SYS_NAND_QUIET 1
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
#define CONFIG_USB_UHCI 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_USB_KEYBOARD 1
-#define CONFIG_SYS_DEVICE_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */
+#define CONFIG_SYS_STDIO_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */
/*
* Autoboot stuff
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
#define CONFIG_SYS_NAND0_BASE 0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#endif /* CONFIG_CMD_NAND */
/*-----------------------------------------------------------------------
#define CONFIG_USB_STORAGE
/* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
#endif
/************************************************************
* Debug support
#endif
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
#define CONFIG_PCI_OHCI 1
#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_KEYBOARD 1
-#define CONFIG_SYS_DEVICE_DEREGISTER
+#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_SYS_USB_EVENT_POLL 1
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#define CONFIG_PCI_OHCI 1
#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_KEYBOARD 1
-#define CONFIG_SYS_DEVICE_DEREGISTER
+#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_SYS_USB_EVENT_POLL 1
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#define CONFIG_USB_STORAGE
/* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
/************************************************************
* Debug support
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*
* PCI stuff
*/
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*
* nand device 1 on dave (PPChameleonEVB) needs more time,
* so we just introduce additional wait in nand_wait(),
WRITE_NAND(d, addr); \
} while(0)
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#endif /* CONFIG_CMD_NAND */
#define CONFIG_PCI
#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#endif /* CONFIG_NAND */
/*
#define CONFIG_DOS_PARTITION 1
/* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
/************************************************************
* RTC
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
#define CONFIG_ENV_IS_IN_ONENAND 1
#define CONFIG_ENV_ADDR 0x00020000
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#ifdef CONFIG_SYS_USE_UBI
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "onenand0=onenand"
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-#endif
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
/* Ethernet */
#define CONFIG_MACB 1
#define CONFIG_RMII 1
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
/* NOR flash, if populated */
#ifndef CONFIG_CMD_NAND
#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#else
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet - not present */
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*=====================*/
/* Board related stuff */
/*=====================*/
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/* I2C switch definitions for PCA9543 chip */
#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70
#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* nand timeout values */
#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000
#define CONFIG_SYS_NAND_OTHER_TO 100
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
/* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
#endif
/*
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
#define NAND_ALLOW_ERASE_ALL 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* Environment information */
#define CONFIG_BOOTDELAY 10
* NAND-FLASH stuff
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
+#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/*
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* NOR flash */
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
#define CONFIG_CMD_JFFS2 1
#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */
#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/*-----------------------------------------------------------------------
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x77D00000
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* Boot configuration (define only one of next 3) */
#define CONFIG_BOOT_NAND
/* None of these are currently implemented. Left from the original Samsung
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_CMD_NAND
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* LIME GDC */
#define CONFIG_SYS_LIME_BASE 0xc8000000
#define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_NAND_SENDCMD_RETRY 3
#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* NAND Timing Parameters (in ns) */
#define NAND_TIMING_tCH 10
#define NAND_TIMING_tCS 0
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _CONSOLE_H_
-#define _CONSOLE_H_
-
-#include <devices.h>
-
-/*
-** VARIABLES
-*/
-
-extern device_t *stdio_devices[] ;
-extern char *stdio_names[MAX_FILES] ;
-
-#endif
#ifndef _IO_MUX_H
#define _IO_MUX_H
-#include <devices.h>
+#include <stdio_dev.h>
/*
* Stuff required to support console multiplexing.
* Pointers to devices used for each file type. Defined in console.c
* but storage is allocated in iomux.c.
*/
-extern device_t **console_devices[MAX_FILES];
+extern struct stdio_dev **console_devices[MAX_FILES];
/*
* The count of devices assigned to each FILE. Defined in console.c
* and populated in iomux.c.
int iomux_doenv(const int, const char *);
void iomux_printdevs(const int);
-device_t *search_device(int, char *);
+struct stdio_dev *search_device(int, char *);
#endif /* _IO_MUX_H */
#define PCI_DEVICE_ID_CORAL_P 0x2019
#define PCI_DEVICE_ID_CORAL_PA 0x201E
+#define GC_HOST_BASE 0x01fc0000
+#define GC_DISP_BASE 0x01fd0000
+#define GC_DRAW_BASE 0x01ff0000
+
+/* Host interface registers */
+#define GC_SRST 0x0000002c
+#define GC_CCF 0x00000038
+#define GC_MMR 0x0000fffc
+
+/*
+ * Display Controller registers
+ * _A means the offset is aligned, we use these for boards
+ * with 8-/16-bit GDC access not working or buggy.
+ */
+#define GC_DCM0 0x00000000
+#define GC_HTP_A 0x00000004
+#define GC_HTP 0x00000006
+#define GC_HDB_HDP_A 0x00000008
+#define GC_HDP 0x00000008
+#define GC_HDB 0x0000000a
+#define GC_VSW_HSW_HSP_A 0x0000000c
+#define GC_HSP 0x0000000c
+#define GC_HSW 0x0000000e
+#define GC_VSW 0x0000000f
+#define GC_VTR_A 0x00000010
+#define GC_VTR 0x00000012
+#define GC_VDP_VSP_A 0x00000014
+#define GC_VSP 0x00000014
+#define GC_VDP 0x00000016
+#define GC_WY_WX 0x00000018
+#define GC_WH_WW 0x0000001c
+#define GC_L0M 0x00000020
+#define GC_L0OA0 0x00000024
+#define GC_L0DA0 0x00000028
+#define GC_L0DY_L0DX 0x0000002c
+#define GC_L2M 0x00000040
+#define GC_L2OA0 0x00000044
+#define GC_L2DA0 0x00000048
+#define GC_L2OA1 0x0000004c
+#define GC_L2DA1 0x00000050
+#define GC_L2DX 0x00000054
+#define GC_L2DY 0x00000056
+#define GC_DCM1 0x00000100
+#define GC_DCM2 0x00000104
+#define GC_DCM3 0x00000108
+#define GC_L0EM 0x00000110
+#define GC_L0WY_L0WX 0x00000114
+#define GC_L0WH_L0WW 0x00000118
+#define GC_L2EM 0x00000130
+#define GC_L2WX 0x00000134
+#define GC_L2WY 0x00000136
+#define GC_L2WW 0x00000138
+#define GC_L2WH 0x0000013a
+#define GC_L0PAL0 0x00000400
+
+/* Drawing registers */
+#define GC_CTR 0x00000400
+#define GC_IFCNT 0x00000408
+#define GC_FBR 0x00000440
+#define GC_XRES 0x00000444
+#define GC_CXMIN 0x00000454
+#define GC_CXMAX 0x00000458
+#define GC_CYMIN 0x0000045c
+#define GC_CYMAX 0x00000460
+#define GC_FC 0x00000480
+#define GC_BC 0x00000484
+#define GC_FIFO 0x000004a0
+#define GC_GEO_FIFO 0x00008400
+
typedef struct {
unsigned int index;
unsigned int value;
int skge_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
+int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int sh_eth_initialize(bd_t *bis);
int dm9000_initialize(bd_t *bis);
extern struct serial_device serial_stuart_device;
extern void serial_initialize(void);
-extern void serial_devices_init(void);
+extern void serial_stdio_init(void);
extern int serial_assign(char * name);
extern void serial_reinit_all(void);
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* MA 02111-1307 USA
*/
-#include <linux/list.h>
+#ifndef _STDIO_DEV_H_
+#define _STDIO_DEV_H_
-#ifndef _DEVICES_H_
-#define _DEVICES_H_
+#include <linux/list.h>
/*
- * CONSOLE DEVICES
+ * STDIO DEVICES
*/
#define DEV_FLAGS_INPUT 0x00000001 /* Device can be used as input console */
#define DEV_EXT_VIDEO 0x00000001 /* Video extensions supported */
/* Device information */
-typedef struct {
+struct stdio_dev {
int flags; /* Device flags: input/output/system */
int ext; /* Supported extensions */
char name[16]; /* Device name */
void *priv; /* Private extensions */
struct list_head list;
-} device_t;
+};
/*
* VIDEO EXTENSIONS
/*
* VARIABLES
*/
-extern device_t *stdio_devices[];
+extern struct stdio_dev *stdio_devices[];
extern char *stdio_names[MAX_FILES];
/*
* PROTOTYPES
*/
-int device_register (device_t * dev);
-int devices_init (void);
-#ifdef CONFIG_SYS_DEVICE_DEREGISTER
-int device_deregister(char *devname);
+int stdio_register (struct stdio_dev * dev);
+int stdio_init (void);
+#ifdef CONFIG_SYS_STDIO_DEREGISTER
+int stdio_deregister(char *devname);
#endif
-struct list_head* device_get_list(void);
-device_t* device_get_by_name(char* name);
-device_t* device_clone(device_t *dev);
+struct list_head* stdio_get_list(void);
+struct stdio_dev* stdio_get_by_name(char* name);
+struct stdio_dev* stdio_clone(struct stdio_dev *dev);
#ifdef CONFIG_ARM_DCC_MULTI
int drv_arm_dcc_init(void);
int drv_jtag_console_init (void);
#endif
-#endif /* _DEVICES_H_ */
+#endif
#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
/* IP Address */
gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- devices_init (); /* get the devices list going. */
+ stdio_init (); /* get the devices list going. */
jumptable_init ();
#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- devices_init();
+ stdio_init();
jumptable_init();
console_init_r();
#include <common.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <environment.h>
#include <malloc.h>
#include <net.h>
/* relocate environment function pointers etc. */
env_relocate();
- /* Initialize devices */
- devices_init();
+ /* Initialize stdio devices */
+ stdio_init();
jumptable_init();
/* Initialize the console (after the relocation and devices init) */
*/
#include <common.h>
-#include <console.h>
+#include <stdio_dev.h>
#include <watchdog.h>
#include <post.h>
#include <common.h>
#include <watchdog.h>
#include <command.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <malloc.h>
show_boot_progress(0x27);
- devices_init ();
+ stdio_init ();
jumptable_init ();
#include <common.h>
#include <pci.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <i8042.h>
#include <asm/ptrace.h>
#include <asm/realmode.h>
{
u16 pos;
- static device_t vga_dev;
- static device_t kbd_dev;
+ static struct stdio_dev vga_dev;
+ static struct stdio_dev kbd_dev;
vidmem = (char *) 0xb8000;
vidport = 0x3d4;
vga_dev.tstc = NULL; /* 'tstc' function */
vga_dev.getc = NULL; /* 'getc' function */
- if (device_register(&vga_dev) == 0) {
+ if (stdio_register(&vga_dev) == 0) {
return 1;
}
kbd_dev.tstc = i8042_tstc; /* 'tstc' function */
kbd_dev.getc = i8042_getc; /* 'getc' function */
- if (device_register(&kbd_dev) == 0) {
+ if (stdio_register(&kbd_dev) == 0) {
return 1;
}
return 0;
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <asm/immap.h>
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize devices */
- devices_init ();
+ /* Initialize stdio devices */
+ stdio_init ();
/* Initialize the jump table for applications */
jumptable_init ();
#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
-#if defined(CONFIG_CMD_NET)
- char *s, *e;
- int i;
-#endif
asm ("nop"); /* FIXME gd is not initialize - wait */
memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
gd->bd = (bd_t *) (gd + 1); /* At end of global data */
#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize devices */
- devices_init ();
+ /* Initialize stdio devices */
+ stdio_init ();
jumptable_init ();
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <watchdog.h>
#include <net.h>
#ifdef CONFIG_STATUS_LED
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
- devices_init();
+ stdio_init();
jumptable_init();
console_init_r();
/*
*/
#include <common.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <watchdog.h>
#include <net.h>
#ifdef CONFIG_STATUS_LED
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
- devices_init();
+ stdio_init();
jumptable_init();
console_init_r();
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#ifdef CONFIG_8xx
#include <mpc8xx.h>
#endif
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize devices */
- devices_init ();
+ /* Initialize stdio devices */
+ stdio_init ();
/* Initialize the jump table for applications */
jumptable_init ();
#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <watchdog.h>
sh_flash_init, /* Flash memory(NOR) init*/
INIT_FUNC_NAND_INIT/* Flash memory (NAND) init */
INIT_FUNC_PCI_INIT /* PCI init */
- devices_init,
+ stdio_init,
console_init_r,
interrupt_init,
#ifdef BOARD_LATE_INIT
#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <config.h>
#if defined(CONFIG_CMD_IDE)
#include <ide.h>
pci_init();
#endif
- /* Initialize devices */
- devices_init();
+ /* Initialize stdio devices */
+ stdio_init();
/* Initialize the jump table for applications */
jumptable_init();
*/
#include <common.h>
-#include <console.h>
+#include <stdio_dev.h>
#include <watchdog.h>
#include <post.h>
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-y += mkimage$(SFX)
BIN_FILES-$(CONFIG_ENV_IS_EMBEDDED) += envcrc$(SFX)
+BIN_FILES-$(CONFIG_ENV_IS_IN_DATAFLASH) += envcrc$(SFX)
BIN_FILES-$(CONFIG_ENV_IS_IN_EEPROM) += envcrc$(SFX)
BIN_FILES-$(CONFIG_ENV_IS_IN_FLASH) += envcrc$(SFX)
+BIN_FILES-$(CONFIG_ENV_IS_IN_ONENAND) += envcrc$(SFX)
+BIN_FILES-$(CONFIG_ENV_IS_IN_NAND) += envcrc$(SFX)
BIN_FILES-$(CONFIG_ENV_IS_IN_NVRAM) += envcrc$(SFX)
+BIN_FILES-$(CONFIG_ENV_IS_IN_SPI_FLASH) += envcrc$(SFX)
BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_LCD_LOGO) += bmp_logo$(SFX)
projects / kernel / u-boot.git / commitdiff