[SCSI] lpfc 8.3.39: Fixed BlockGuard to take advantage of rdprotect/wrprotect info...
authorJames Smart <james.smart@emulex.com>
Thu, 18 Apr 2013 00:18:07 +0000 (20:18 -0400)
committerJames Bottomley <JBottomley@Parallels.com>
Thu, 2 May 2013 20:02:40 +0000 (13:02 -0700)
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
drivers/scsi/lpfc/lpfc_hw.h
drivers/scsi/lpfc/lpfc_scsi.c

index e8c4760..83700c1 100644 (file)
@@ -1667,6 +1667,7 @@ enum lpfc_protgrp_type {
 #define        BG_OP_IN_CSUM_OUT_CSUM          0x5
 #define        BG_OP_IN_CRC_OUT_CSUM           0x6
 #define        BG_OP_IN_CSUM_OUT_CRC           0x7
+#define        BG_OP_RAW_MODE                  0x8
 
 struct lpfc_pde5 {
        uint32_t word0;
index be11bb9..44995de 100644 (file)
@@ -68,6 +68,10 @@ struct scsi_dif_tuple {
        __be32 ref_tag;         /* Target LBA or indirect LBA */
 };
 
+#if !defined(SCSI_PROT_GUARD_CHECK) || !defined(SCSI_PROT_REF_CHECK)
+#define scsi_prot_flagged(sc, flg)     sc
+#endif
+
 static void
 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
 static void
@@ -2066,9 +2070,21 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
        bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
        bf_set(pde6_optx, pde6, txop);
        bf_set(pde6_oprx, pde6, rxop);
+
+       /*
+        * We only need to check the data on READs, for WRITEs
+        * protection data is automatically generated, not checked.
+        */
        if (datadir == DMA_FROM_DEVICE) {
-               bf_set(pde6_ce, pde6, checking);
-               bf_set(pde6_re, pde6, checking);
+               if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+                       bf_set(pde6_ce, pde6, checking);
+               else
+                       bf_set(pde6_ce, pde6, 0);
+
+               if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+                       bf_set(pde6_re, pde6, checking);
+               else
+                       bf_set(pde6_re, pde6, 0);
        }
        bf_set(pde6_ai, pde6, 1);
        bf_set(pde6_ae, pde6, 0);
@@ -2221,8 +2237,17 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
                bf_set(pde6_optx, pde6, txop);
                bf_set(pde6_oprx, pde6, rxop);
-               bf_set(pde6_ce, pde6, checking);
-               bf_set(pde6_re, pde6, checking);
+
+               if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+                       bf_set(pde6_ce, pde6, checking);
+               else
+                       bf_set(pde6_ce, pde6, 0);
+
+               if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+                       bf_set(pde6_re, pde6, checking);
+               else
+                       bf_set(pde6_re, pde6, 0);
+
                bf_set(pde6_ai, pde6, 1);
                bf_set(pde6_ae, pde6, 0);
                bf_set(pde6_apptagval, pde6, 0);
@@ -2385,7 +2410,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
        struct sli4_sge_diseed *diseed = NULL;
        dma_addr_t physaddr;
        int i = 0, num_sge = 0, status;
-       int datadir = sc->sc_data_direction;
        uint32_t reftag;
        unsigned blksize;
        uint8_t txop, rxop;
@@ -2423,13 +2447,26 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
        diseed->ref_tag = cpu_to_le32(reftag);
        diseed->ref_tag_tran = diseed->ref_tag;
 
+       /*
+        * We only need to check the data on READs, for WRITEs
+        * protection data is automatically generated, not checked.
+        */
+       if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+               if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+                       bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+               else
+                       bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
+
+               if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+                       bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+               else
+                       bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
+       }
+
        /* setup DISEED with the rest of the info */
        bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
        bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
-       if (datadir == DMA_FROM_DEVICE) {
-               bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
-               bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
-       }
+
        bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
        bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
 
@@ -2571,11 +2608,34 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                diseed->ref_tag = cpu_to_le32(reftag);
                diseed->ref_tag_tran = diseed->ref_tag;
 
+               if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) {
+                       bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+
+               } else {
+                       bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
+                       /*
+                        * When in this mode, the hardware will replace
+                        * the guard tag from the host with a
+                        * newly generated good CRC for the wire.
+                        * Switch to raw mode here to avoid this
+                        * behavior. What the host sends gets put on the wire.
+                        */
+                       if (txop == BG_OP_IN_CRC_OUT_CRC) {
+                               txop = BG_OP_RAW_MODE;
+                               rxop = BG_OP_RAW_MODE;
+                       }
+               }
+
+
+               if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+                       bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+               else
+                       bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
+
                /* setup DISEED with the rest of the info */
                bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
                bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
-               bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
-               bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+
                bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
                bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
 
@@ -2739,6 +2799,47 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 }
 
 /**
+ * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be adjusted.
+ *
+ * Adjust the data length to account for how much data
+ * is actually on the wire.
+ *
+ * returns the adjusted data length
+ **/
+static int
+lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
+                      struct lpfc_scsi_buf *lpfc_cmd)
+{
+       struct scsi_cmnd *sc = lpfc_cmd->pCmd;
+       int fcpdl;
+
+       fcpdl = scsi_bufflen(sc);
+
+       /* Check if there is protection data on the wire */
+       if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+               /* Read */
+               if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
+                       return fcpdl;
+
+       } else {
+               /* Write */
+               if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
+                       return fcpdl;
+       }
+
+       /*
+        * If we are in DIF Type 1 mode every data block has a 8 byte
+        * DIF (trailer) attached to it. Must ajust FCP data length.
+        */
+       if (scsi_prot_flagged(sc, SCSI_PROT_TRANSFER_PI))
+               fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
+
+       return fcpdl;
+}
+
+/**
  * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
@@ -2758,8 +2859,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
        uint32_t num_bde = 0;
        int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
        int prot_group_type = 0;
-       int diflen, fcpdl;
-       unsigned blksize;
+       int fcpdl;
 
        /*
         * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2856,18 +2956,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
        iocb_cmd->ulpBdeCount = 1;
        iocb_cmd->ulpLe = 1;
 
-       fcpdl = scsi_bufflen(scsi_cmnd);
-
-       if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
-               /*
-                * We are in DIF Type 1 mode
-                * Every data block has a 8 byte DIF (trailer)
-                * attached to it.  Must ajust FCP data length
-                */
-               blksize = lpfc_cmd_blksize(scsi_cmnd);
-               diflen = (fcpdl / blksize) * 8;
-               fcpdl += diflen;
-       }
+       fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
        fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
 
        /*
@@ -2982,7 +3071,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
                        chk_guard = 1;
                guard_type = scsi_host_get_guard(cmd->device->host);
 
-               start_ref_tag = scsi_get_lba(cmd);
+               start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
                start_app_tag = src->app_tag;
                src = (struct scsi_dif_tuple *)sg_virt(sgpe);
                len = sgpe->length;
@@ -3398,45 +3487,6 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
- * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
- * @phba: The Hba for which this call is being executed.
- * @lpfc_cmd: The scsi buffer which is going to be adjusted.
- *
- * Adjust the data length to account for how much data
- * is actually on the wire.
- *
- * returns the adjusted data length
- **/
-static int
-lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
-               struct lpfc_scsi_buf *lpfc_cmd)
-{
-       struct scsi_cmnd *sc = lpfc_cmd->pCmd;
-       int diflen, fcpdl;
-       unsigned blksize;
-
-       fcpdl = scsi_bufflen(sc);
-
-       /* Check if there is protection data on the wire */
-       if (sc->sc_data_direction == DMA_FROM_DEVICE) {
-               /* Read */
-               if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
-                       return fcpdl;
-
-       } else {
-               /* Write */
-               if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
-                       return fcpdl;
-       }
-
-       /* If protection data on the wire, adjust the count accordingly */
-       blksize = lpfc_cmd_blksize(sc);
-       diflen = (fcpdl / blksize) * 8;
-       fcpdl += diflen;
-       return fcpdl;
-}
-
-/**
  * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -3564,7 +3614,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
        }
 
        fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
-
        fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
 
        /*