arm64: dts: qcom: Add initial QCM2290 device tree
authorKonrad Dybcio <konrad.dybcio@linaro.org>
Wed, 5 Apr 2023 15:50:32 +0000 (17:50 +0200)
committerBjorn Andersson <andersson@kernel.org>
Fri, 7 Apr 2023 18:34:17 +0000 (11:34 -0700)
Add an initial device tree for the QCM2290 low-end SoC, featuring 4
"customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).

This revision brings support for:
- TSENS & thermal zones
- SDHCI1/2
- I2C, SPI, UART
- MPSS
- ADSP
- Wi-Fi

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-3-dae06f8830dc@linaro.org
arch/arm64/boot/dts/qcom/qcm2290.dtsi [new file with mode: 0644]

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
new file mode 100644 (file)
index 0000000..ae5abc7
--- /dev/null
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ *
+ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+       interrupt-parent = <&intc>;
+
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       chosen { };
+
+       clocks {
+               xo_board: xo-board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+               };
+
+               sleep_clk: sleep-clk {
+                       compatible = "fixed-clock";
+                       clock-frequency = <32764>;
+                       #clock-cells = <0>;
+               };
+       };
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               CPU0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x0>;
+                       clocks = <&cpufreq_hw 0>;
+                       capacity-dmips-mhz = <1024>;
+                       dynamic-power-coefficient = <100>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+                       L2_0: l2-cache {
+                               compatible = "cache";
+                               cache-level = <2>;
+                       };
+               };
+
+               CPU1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x1>;
+                       clocks = <&cpufreq_hw 0>;
+                       capacity-dmips-mhz = <1024>;
+                       dynamic-power-coefficient = <100>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+               };
+
+               CPU2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x2>;
+                       clocks = <&cpufreq_hw 0>;
+                       capacity-dmips-mhz = <1024>;
+                       dynamic-power-coefficient = <100>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+               };
+
+               CPU3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x3>;
+                       clocks = <&cpufreq_hw 0>;
+                       capacity-dmips-mhz = <1024>;
+                       dynamic-power-coefficient = <100>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+               };
+
+               cpu-map {
+                       cluster0 {
+                               core0 {
+                                       cpu = <&CPU0>;
+                               };
+
+                               core1 {
+                                       cpu = <&CPU1>;
+                               };
+
+                               core2 {
+                                       cpu = <&CPU2>;
+                               };
+
+                               core3 {
+                                       cpu = <&CPU3>;
+                               };
+                       };
+               };
+       };
+
+       firmware {
+               scm: scm {
+                       compatible = "qcom,scm-qcm2290", "qcom,scm";
+                       clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+                       clock-names = "core";
+                       #reset-cells = <1>;
+               };
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               /* We expect the bootloader to fill in the size */
+               reg = <0 0x40000000 0 0>;
+       };
+
+       pmu {
+               compatible = "arm,armv8-pmuv3";
+               interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       reserved_memory: reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               hyp_mem: hyp@45700000 {
+                       reg = <0x0 0x45700000 0x0 0x600000>;
+                       no-map;
+               };
+
+               xbl_aop_mem: xbl-aop@45e00000 {
+                       reg = <0x0 0x45e00000 0x0 0x140000>;
+                       no-map;
+               };
+
+               sec_apps_mem: sec-apps@45fff000 {
+                       reg = <0x0 0x45fff000 0x0 0x1000>;
+                       no-map;
+               };
+
+               smem_mem: smem@46000000 {
+                       compatible = "qcom,smem";
+                       reg = <0x0 0x46000000 0x0 0x200000>;
+                       no-map;
+
+                       hwlocks = <&tcsr_mutex 3>;
+                       qcom,rpm-msg-ram = <&rpm_msg_ram>;
+               };
+
+               pil_modem_mem: modem@4ab00000 {
+                       reg = <0x0 0x4ab00000 0x0 0x6900000>;
+                       no-map;
+               };
+
+               pil_video_mem: video@51400000 {
+                       reg = <0x0 0x51400000 0x0 0x500000>;
+                       no-map;
+               };
+
+               wlan_msa_mem: wlan-msa@51900000 {
+                       reg = <0x0 0x51900000 0x0 0x100000>;
+                       no-map;
+               };
+
+               pil_adsp_mem: adsp@51a00000 {
+                       reg = <0x0 0x51a00000 0x0 0x1c00000>;
+                       no-map;
+               };
+
+               pil_ipa_fw_mem: ipa-fw@53600000 {
+                       reg = <0x0 0x53600000 0x0 0x10000>;
+                       no-map;
+               };
+
+               pil_ipa_gsi_mem: ipa-gsi@53610000 {
+                       reg = <0x0 0x53610000 0x0 0x5000>;
+                       no-map;
+               };
+
+               pil_gpu_mem: zap@53615000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0x53615000 0x0 0x2000>;
+                       no-map;
+               };
+
+               cont_splash_memory: framebuffer@5c000000 {
+                       reg = <0x0 0x5c000000 0x0 0x00f00000>;
+                       no-map;
+               };
+
+               dfps_data_memory: dpfs-data@5cf00000 {
+                       reg = <0x0 0x5cf00000 0x0 0x0100000>;
+                       no-map;
+               };
+
+               removed_mem: reserved@60000000 {
+                       reg = <0x0 0x60000000 0x0 0x3900000>;
+                       no-map;
+               };
+
+               rmtfs_mem: memory@89b01000 {
+                       compatible = "qcom,rmtfs-mem";
+                       reg = <0x0 0x89b01000 0x0 0x200000>;
+                       no-map;
+
+                       qcom,client-id = <1>;
+                       qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+               };
+       };
+
+       rpm-glink {
+               compatible = "qcom,glink-rpm";
+               interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+               qcom,rpm-msg-ram = <&rpm_msg_ram>;
+               mboxes = <&apcs_glb 0>;
+
+               rpm_requests: rpm-requests {
+                       compatible = "qcom,rpm-qcm2290";
+                       qcom,glink-channels = "rpm_requests";
+
+                       rpmcc: clock-controller {
+                               compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+                               clocks = <&xo_board>;
+                               clock-names = "xo";
+                               #clock-cells = <1>;
+                       };
+
+                       rpmpd: power-controller {
+                               compatible = "qcom,qcm2290-rpmpd";
+                               #power-domain-cells = <1>;
+                               operating-points-v2 = <&rpmpd_opp_table>;
+
+                               rpmpd_opp_table: opp-table {
+                                       compatible = "operating-points-v2";
+
+                                       rpmpd_opp_min_svs: opp1 {
+                                               opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+                                       };
+
+                                       rpmpd_opp_low_svs: opp2 {
+                                               opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+                                       };
+
+                                       rpmpd_opp_svs: opp3 {
+                                               opp-level = <RPM_SMD_LEVEL_SVS>;
+                                       };
+
+                                       rpmpd_opp_svs_plus: opp4 {
+                                               opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+                                       };
+
+                                       rpmpd_opp_nom: opp5 {
+                                               opp-level = <RPM_SMD_LEVEL_NOM>;
+                                       };
+
+                                       rpmpd_opp_nom_plus: opp6 {
+                                               opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+                                       };
+
+                                       rpmpd_opp_turbo: opp7 {
+                                               opp-level = <RPM_SMD_LEVEL_TURBO>;
+                                       };
+
+                                       rpmpd_opp_turbo_plus: opp8 {
+                                               opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+                                       };
+                               };
+                       };
+               };
+       };
+
+       smp2p-adsp {
+               compatible = "qcom,smp2p";
+               qcom,smem = <443>, <429>;
+
+               interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apcs_glb 10>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <2>;
+
+               adsp_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               adsp_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       smp2p-mpss {
+               compatible = "qcom,smp2p";
+               qcom,smem = <435>, <428>;
+
+               interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apcs_glb 14>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <1>;
+
+               modem_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               modem_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               wlan_smp2p_in: wlan-wpss-to-ap {
+                       qcom,entry-name = "wlan";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       soc: soc@0 {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges = <0 0 0 0 0x10 0>;
+               dma-ranges = <0 0 0 0 0x10 0>;
+
+               tcsr_mutex: hwlock@340000 {
+                       compatible = "qcom,tcsr-mutex";
+                       reg = <0x0 0x00340000 0x0 0x20000>;
+                       #hwlock-cells = <1>;
+               };
+
+               tlmm: pinctrl@500000 {
+                       compatible = "qcom,qcm2290-tlmm";
+                       reg = <0x0 0x00500000 0x0 0x300000>;
+                       interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       gpio-ranges = <&tlmm 0 0 127>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       qup_i2c0_default: qup-i2c0-default-state {
+                               pins = "gpio0", "gpio1";
+                               function = "qup0";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c1_default: qup-i2c1-default-state {
+                               pins = "gpio4", "gpio5";
+                               function = "qup1";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c2_default: qup-i2c2-default-state {
+                               pins = "gpio6", "gpio7";
+                               function = "qup2";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c3_default: qup-i2c3-default-state {
+                               pins = "gpio8", "gpio9";
+                               function = "qup3";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c4_default: qup-i2c4-default-state {
+                               pins = "gpio12", "gpio13";
+                               function = "qup4";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c5_default: qup-i2c5-default-state {
+                               pins = "gpio14", "gpio15";
+                               function = "qup5";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi0_default: qup-spi0-default-state {
+                               pins = "gpio0", "gpio1","gpio2", "gpio3";
+                               function = "qup0";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi1_default: qup-spi1-default-state {
+                               pins = "gpio4", "gpio5", "gpio69", "gpio70";
+                               function = "qup1";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi2_default: qup-spi2-default-state {
+                               pins = "gpio6", "gpio7", "gpio71", "gpio80";
+                               function = "qup2";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi3_default: qup-spi3-default-state {
+                               pins = "gpio8", "gpio9", "gpio10", "gpio11";
+                               function = "qup3";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi4_default: qup-spi4-default-state {
+                               pins = "gpio12", "gpio13", "gpio96", "gpio97";
+                               function = "qup4";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi5_default: qup-spi5-default-state {
+                               pins = "gpio14", "gpio15", "gpio16", "gpio17";
+                               function = "qup5";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_uart0_default: qup-uart0-default-state {
+                               pins = "gpio0", "gpio1", "gpio2", "gpio3";
+                               function = "qup0";
+                               drive-strength = <2>;
+                               bias-disable;
+                       };
+
+                       qup_uart4_default: qup-uart4-default-state {
+                               pins = "gpio12", "gpio13";
+                               function = "qup4";
+                               drive-strength = <2>;
+                               bias-disable;
+                       };
+
+                       sdc1_state_on: sdc1-on-state {
+                               clk-pins {
+                                       pins = "sdc1_clk";
+                                       drive-strength = <16>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc1_cmd";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc1_data";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+
+                               rclk-pins {
+                                       pins = "sdc1_rclk";
+                                       bias-pull-down;
+                               };
+                       };
+
+                       sdc1_state_off: sdc1-off-state {
+                               clk-pins {
+                                       pins = "sdc1_clk";
+                                       drive-strength = <2>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc1_cmd";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc1_data";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+
+                               rclk-pins {
+                                       pins = "sdc1_rclk";
+                                       bias-pull-down;
+                               };
+                       };
+
+                       sdc2_state_on: sdc2-on-state {
+                               clk-pins {
+                                       pins = "sdc2_clk";
+                                       drive-strength = <16>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc2_cmd";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc2_data";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+                       };
+
+                       sdc2_state_off: sdc2-off-state {
+                               clk-pins {
+                                       pins = "sdc2_clk";
+                                       drive-strength = <2>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc2_cmd";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc2_data";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+                       };
+               };
+
+               gcc: clock-controller@1400000 {
+                       compatible = "qcom,gcc-qcm2290";
+                       reg = <0x0 0x01400000 0x0 0x1f0000>;
+                       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+                       clock-names = "bi_tcxo", "sleep_clk";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+               };
+
+               usb_hsphy: phy@1613000 {
+                       compatible = "qcom,qcm2290-qusb2-phy";
+                       reg = <0x0 0x01613000 0x0 0x180>;
+
+                       clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+                                <&rpmcc RPM_SMD_XO_CLK_SRC>;
+                       clock-names = "cfg_ahb", "ref";
+
+                       resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+                       nvmem-cells = <&qusb2_hstx_trim>;
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               qfprom@1b44000 {
+                       compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
+                       reg = <0x0 0x01b44000 0x0 0x3000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       qusb2_hstx_trim: hstx-trim@25b {
+                               reg = <0x25b 0x1>;
+                               bits = <1 4>;
+                       };
+               };
+
+               spmi_bus: spmi@1c40000 {
+                       compatible = "qcom,spmi-pmic-arb";
+                       reg = <0x0 0x01c40000 0x0 0x1100>,
+                             <0x0 0x01e00000 0x0 0x2000000>,
+                             <0x0 0x03e00000 0x0 0x100000>,
+                             <0x0 0x03f00000 0x0 0xa0000>,
+                             <0x0 0x01c0a000 0x0 0x26000>;
+                       reg-names = "core",
+                                   "chnls",
+                                   "obsrvr",
+                                   "intr",
+                                   "cnfg";
+                       interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "periph_irq";
+                       qcom,ee = <0>;
+                       qcom,channel = <0>;
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       interrupt-controller;
+                       #interrupt-cells = <4>;
+               };
+
+               tsens0: thermal-sensor@4411000 {
+                       compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
+                       reg = <0x0 0x04411000 0x0 0x1ff>,
+                             <0x0 0x04410000 0x0 0x8>;
+                       #qcom,sensors = <10>;
+                       interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "uplow", "critical";
+                       #thermal-sensor-cells = <1>;
+               };
+
+               rng: rng@4453000 {
+                       compatible = "qcom,prng-ee";
+                       reg = <0x0 0x04453000 0x0 0x1000>;
+                       clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
+                       clock-names = "core";
+               };
+
+               rpm_msg_ram: sram@45f0000 {
+                       compatible = "qcom,rpm-msg-ram";
+                       reg = <0x0 0x045f0000 0x0 0x7000>;
+               };
+
+               sram@4690000 {
+                       compatible = "qcom,rpm-stats";
+                       reg = <0x0 0x04690000 0x0 0x10000>;
+               };
+
+               sdhc_1: mmc@4744000 {
+                       compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+                       reg = <0x0 0x04744000 0x0 0x1000>,
+                             <0x0 0x04745000 0x0 0x1000>,
+                             <0x0 0x04748000 0x0 0x8000>;
+                       reg-names = "hc",
+                                   "cqhci",
+                                   "ice";
+
+                       interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hc_irq", "pwr_irq";
+
+                       clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+                                <&gcc GCC_SDCC1_APPS_CLK>,
+                                <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                                <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+                       clock-names = "iface",
+                                     "core",
+                                     "xo",
+                                     "ice";
+
+                       resets = <&gcc GCC_SDCC1_BCR>;
+
+                       power-domains = <&rpmpd QCM2290_VDDCX>;
+                       iommus = <&apps_smmu 0xc0 0x0>;
+
+                       qcom,dll-config = <0x000f642c>;
+                       qcom,ddr-config = <0x80040868>;
+                       bus-width = <8>;
+
+                       status = "disabled";
+               };
+
+               sdhc_2: mmc@4784000 {
+                       compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+                       reg = <0x0 0x04784000 0x0 0x1000>;
+                       reg-names = "hc";
+
+                       interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hc_irq", "pwr_irq";
+
+                       clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+                                <&gcc GCC_SDCC2_APPS_CLK>,
+                                <&rpmcc RPM_SMD_XO_CLK_SRC>;
+                       clock-names = "iface",
+                                     "core",
+                                     "xo";
+
+                       resets = <&gcc GCC_SDCC2_BCR>;
+
+                       power-domains = <&rpmpd QCM2290_VDDCX>;
+                       operating-points-v2 = <&sdhc2_opp_table>;
+                       iommus = <&apps_smmu 0xa0 0x0>;
+
+                       qcom,dll-config = <0x0007642c>;
+                       qcom,ddr-config = <0x80040868>;
+                       bus-width = <4>;
+
+                       status = "disabled";
+
+                       sdhc2_opp_table: opp-table {
+                               compatible = "operating-points-v2";
+
+                               opp-100000000 {
+                                       opp-hz = /bits/ 64 <100000000>;
+                                       required-opps = <&rpmpd_opp_low_svs>;
+                               };
+
+                               opp-202000000 {
+                                       opp-hz = /bits/ 64 <202000000>;
+                                       required-opps = <&rpmpd_opp_svs_plus>;
+                               };
+                       };
+               };
+
+               gpi_dma0: dma-controller@4a00000 {
+                       compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
+                       reg = <0x0 0x04a00000 0x0 0x60000>;
+                       interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+                       dma-channels =  <10>;
+                       dma-channel-mask = <0x1f>;
+                       iommus = <&apps_smmu 0xf6 0x0>;
+                       #dma-cells = <3>;
+                       status = "disabled";
+               };
+
+               qupv3_id_0: geniqup@4ac0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0x0 0x04ac0000 0x0 0x2000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0xe3 0x0>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       status = "disabled";
+
+                       i2c0: i2c@4a80000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a80000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c0_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi0: spi@4a80000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a80000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi0_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart0: serial@4a80000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0x0 0x04a80000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart0_default>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@4a84000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a84000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c1_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi1: spi@4a84000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a84000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi1_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       i2c2: i2c@4a88000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a88000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c2_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi2: spi@4a88000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a88000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi2_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       i2c3: i2c@4a8c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a8c000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c3_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi3: spi@4a8c000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a8c000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi3_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       i2c4: i2c@4a90000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a90000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c4_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi4: spi@4a90000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a90000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi4_default>;
+                               dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart4: serial@4a90000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0x0 0x04a90000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart4_default>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c5: i2c@4a94000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x04a94000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_i2c5_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+                                      <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi5: spi@4a94000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x04a94000 0x0 0x4000>;
+                               interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi5_default>;
+                               pinctrl-names = "default";
+                               dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+                                      <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+               };
+
+               usb: usb@4ef8800 {
+                       compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
+                       reg = <0x0 0x04ef8800 0x0 0x400>;
+                       interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+                       clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                                <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                                <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+                       clock-names = "cfg_noc",
+                                     "core",
+                                     "iface",
+                                     "sleep",
+                                     "mock_utmi",
+                                     "xo";
+
+                       assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                                         <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+                       assigned-clock-rates = <19200000>, <133333333>;
+
+                       resets = <&gcc GCC_USB30_PRIM_BCR>;
+                       power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+                       wakeup-source;
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       status = "disabled";
+
+                       usb_dwc3: usb@4e00000 {
+                               compatible = "snps,dwc3";
+                               reg = <0x0 0x04e00000 0x0 0xcd00>;
+                               interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+                               phys = <&usb_hsphy>;
+                               phy-names = "usb2-phy";
+                               iommus = <&apps_smmu 0x120 0x0>;
+                               snps,dis_u2_susphy_quirk;
+                               snps,dis_enblslpm_quirk;
+                               snps,has-lpm-erratum;
+                               snps,hird-threshold = /bits/ 8 <0x10>;
+                               snps,usb3_lpm_capable;
+                               maximum-speed = "super-speed";
+                               dr_mode = "otg";
+                       };
+               };
+
+               remoteproc_mpss: remoteproc@6080000 {
+                       compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
+                       reg = <0x0 0x06080000 0x0 0x100>;
+
+                       interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+                                             <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                                             <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack",
+                                         "shutdown-ack";
+
+                       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmpd QCM2290_VDDCX>;
+
+                       memory-region = <&pil_modem_mem>;
+
+                       qcom,smem-states = <&modem_smp2p_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+                               label = "mpss";
+                               qcom,remote-pid = <1>;
+                               mboxes = <&apcs_glb 12>;
+                       };
+               };
+
+               remoteproc_adsp: remoteproc@ab00000 {
+                       compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
+                       reg = <0x0 0x0ab00000 0x0 0x100>;
+
+                       interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+                                             <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack";
+
+                       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
+                                       <&rpmpd QCM2290_VDD_LPI_MX>;
+
+                       memory-region = <&pil_adsp_mem>;
+
+                       qcom,smem-states = <&adsp_smp2p_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+                               label = "lpass";
+                               qcom,remote-pid = <2>;
+                               mboxes = <&apcs_glb 8>;
+                       };
+               };
+
+               apps_smmu: iommu@c600000 {
+                       compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+                       reg = <0x0 0x0c600000 0x0 0x80000>;
+                       #iommu-cells = <2>;
+                       #global-interrupts = <1>;
+
+                       interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               wifi: wifi@c800000 {
+                       compatible = "qcom,wcn3990-wifi";
+                       reg = <0x0 0x0c800000 0x0 0x800000>;
+                       reg-names = "membase";
+                       memory-region = <&wlan_msa_mem>;
+                       interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+                       iommus = <&apps_smmu 0x1a0 0x1>;
+                       qcom,msa-fixed-perm;
+                       status = "disabled";
+               };
+
+               watchdog@f017000 {
+                       compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
+                       reg = <0x0 0x0f017000 0x0 0x1000>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+                                    <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&sleep_clk>;
+               };
+
+               apcs_glb: mailbox@f111000 {
+                       compatible = "qcom,qcm2290-apcs-hmss-global";
+                       reg = <0x0 0x0f111000 0x0 0x1000>;
+                       #mbox-cells = <1>;
+               };
+
+               timer@f120000 {
+                       compatible = "arm,armv7-timer-mem";
+                       reg = <0x0 0x0f120000 0x0 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x0 0x0f121000 0x8000>;
+
+                       frame@0 {
+                               reg = <0x0 0x1000>,
+                                     <0x1000 0x1000>;
+                               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <0>;
+                       };
+
+                       frame@2000 {
+                               reg = <0x2000 0x1000>;
+                               interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <1>;
+                               status = "disabled";
+                       };
+
+                       frame@3000 {
+                               reg = <0x3000 0x1000>;
+                               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <2>;
+                               status = "disabled";
+                       };
+
+                       frame@4000 {
+                               reg = <0x4000 0x1000>;
+                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <3>;
+                               status = "disabled";
+                       };
+
+                       frame@5000 {
+                               reg = <0x5000 0x1000>;
+                               interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <4>;
+                               status = "disabled";
+                       };
+
+                       frame@6000 {
+                               reg = <0x6000 0x1000>;
+                               interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <5>;
+                               status = "disabled";
+                       };
+
+                       frame@7000 {
+                               reg = <0x7000 0x1000>;
+                               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <6>;
+                               status = "disabled";
+                       };
+               };
+
+               intc: interrupt-controller@f200000 {
+                       compatible = "arm,gic-v3";
+                       reg = <0x0 0x0f200000 0x0 0x10000>,
+                             <0x0 0x0f300000 0x0 0x100000>;
+                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                       #interrupt-cells = <3>;
+                       interrupt-controller;
+                       interrupt-parent = <&intc>;
+                       #redistributor-regions = <1>;
+                       redistributor-stride = <0x0 0x20000>;
+               };
+
+               cpufreq_hw: cpufreq@f521000 {
+                       compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
+                       reg = <0x0 0x0f521000 0x0 0x1000>;
+                       reg-names = "freq-domain0";
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "dcvsh-irq-0";
+                       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+                       clock-names = "xo", "alternate";
+
+                       #freq-domain-cells = <1>;
+                       #clock-cells = <1>;
+               };
+       };
+
+       thermal-zones {
+               mapss-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 0>;
+
+                       trips {
+                               mapss_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mapss_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mapss_crit: mapss-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               video-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 1>;
+
+                       trips {
+                               video_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               video_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               video_crit: video-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               wlan-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 2>;
+
+                       trips {
+                               wlan_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               wlan_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               wlan_crit: wlan-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpuss0-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 3>;
+
+                       trips {
+                               cpuss0_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpuss0_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpuss0_crit: cpuss0-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpuss1-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 4>;
+
+                       trips {
+                               cpuss1_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpuss1_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpuss1_crit: cpuss1-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               mdm0-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 5>;
+
+                       trips {
+                               mdm0_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mdm0_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mdm0_crit: mdm0-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               mdm1-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 6>;
+
+                       trips {
+                               mdm1_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mdm1_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               mdm1_crit: mdm1-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               gpu-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 7>;
+
+                       trips {
+                               gpu_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               gpu_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               gpu_crit: gpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               hm-center-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 8>;
+
+                       trips {
+                               hm_center_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               hm_center_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               hm_center_crit: hm-center-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               camera-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens0 9>;
+
+                       trips {
+                               camera_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               camera_alert1: trip-point1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               camera_crit: camera-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+};