* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
- #define DRV_MODULE_VERSION "1.62.00-3"
- #define DRV_MODULE_RELDATE "2010/12/21"
+ #define DRV_MODULE_VERSION "1.62.00-4"
+ #define DRV_MODULE_RELDATE "2011/01/18"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
else
/* skip rx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
*/
#define skip_rx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
/* skip tx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
*/
#define skip_tx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
(~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
- in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 -
+ in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 -
timer 8 */
#define MISC_REG_SW_TIMER_VAL 0xa5c0
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
+ #define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005
+ #define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
+ #define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
+ #define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
#define IGU_FUNC_BASE 0x0400
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/of.h>
+#include <linux/of_net.h>
#include "gianfar.h"
#include "fsl_pq_mdio.h"
if (err) {
for (j = 0; j < i; j++)
free_grp_irqs(&priv->gfargrp[j]);
- goto irq_fail;
+ goto irq_fail;
}
}
return harmonize_features(skb, protocol, features);
}
- features &= skb->dev->vlan_features;
+ features &= (skb->dev->vlan_features | NETIF_F_HW_VLAN_TX);
if (protocol != htons(ETH_P_8021Q)) {
return harmonize_features(skb, protocol, features);
} else {
features &= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
- NETIF_F_GEN_CSUM;
+ NETIF_F_GEN_CSUM | NETIF_F_HW_VLAN_TX;
return harmonize_features(skb, protocol, features);
}
}
static void __net_exit default_device_exit_batch(struct list_head *net_list)
{
/* At exit all network devices most be removed from a network
- * namespace. Do this in the reverse order of registeration.
+ * namespace. Do this in the reverse order of registration.
* Do this across as many network namespaces as possible to
* improve batching efficiency.
*/