MXS_NAND: Add clock support for iMX8

Since iMX8 has enabled clock uclass, we can parse the clocks from DTB
and enable them in GPMI driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c
index c4dc0bb..43dbe9e 100644 (file)
--- a/drivers/mtd/nand/raw/mxs_nand_dt.c
+++ b/drivers/mtd/nand/raw/mxs_nand_dt.c
@@ -2,6 +2,8 @@
  * NXP GPMI NAND flash driver (DT initialization)
  *
  * Copyright (C) 2018 Toradex
+ * Copyright 2019 NXP
+ *
  * Authors:
  * Stefan Agner <stefan.agner@toradex.com>
  *
@@ -14,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/printk.h>
+#include <clk.h>
 
 #include <mxs_nand.h>
 
@@ -91,6 +94,72 @@ static int mxs_nand_dt_probe(struct udevice *dev)
 
        info->legacy_bch_geometry = dev_read_bool(dev, "fsl,legacy-bch-geometry");
 
+       if (IS_ENABLED(CONFIG_CLK) && IS_ENABLED(CONFIG_IMX8)) {
+               /* Assigned clock already set clock */
+               struct clk gpmi_clk;
+
+               ret = clk_get_by_name(dev, "gpmi_io", &gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't get gpmi io clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_enable(&gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't enable gpmi io clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_get_by_name(dev, "gpmi_apb", &gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't get gpmi_apb clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_enable(&gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't enable gpmi_apb clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_get_by_name(dev, "gpmi_bch", &gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't get gpmi_bch clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_enable(&gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't enable gpmi_bch clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_get_by_name(dev, "gpmi_apb_bch", &gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't get gpmi_apb_bch clk: %d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_enable(&gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't enable gpmi_apb_bch clk: %d\n", ret);
+                       return ret;
+               }
+
+               /* this clock is used for apbh_dma, since the apbh dma does not support DM,
+                 * we optionally enable it here
+                 */
+               ret = clk_get_by_name(dev, "gpmi_apbh_dma", &gpmi_clk);
+               if (ret < 0) {
+                       debug("Can't get gpmi_apbh_dma clk: %d\n", ret);
+               } else {
+                       ret = clk_enable(&gpmi_clk);
+                       if (ret < 0) {
+                               debug("Can't enable gpmi_apbh_dma clk: %d\n", ret);
+                       }
+               }
+       }
+
        return mxs_nand_init_ctrl(info);
 }