}
EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
- struct netlink_ext_ack *extack)
-{
- struct realtek_smi *smi = ds->priv;
- struct rtl8366_vlan_4k vlan4k;
- int ret;
-
- /* Use VLAN nr port + 1 since VLAN0 is not valid */
- if (!smi->ops->is_vlan_valid(smi, port + 1))
- return -EINVAL;
-
- dev_info(smi->dev, "%s filtering on port %d\n",
- vlan_filtering ? "enable" : "disable",
- port);
-
- /* TODO:
- * The hardware support filter ID (FID) 0..7, I have no clue how to
- * support this in the driver when the callback only says on/off.
- */
- ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
- if (ret)
- return ret;
-
- /* Just set the filter to FID 1 for now then */
- ret = rtl8366_set_vlan(smi, port + 1,
- vlan4k.member,
- vlan4k.untag,
- 1);
- if (ret)
- return ret;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
-
int rtl8366_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
#define RTL8366RB_PHY_NO_OFFSET 9
#define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+/* VLAN Ingress Control Register 1, one bit per port.
+ * bit 0 .. 5 will make the switch drop ingress frames without
+ * VID such as untagged or priority-tagged frames for respective
+ * port.
+ * bit 6 .. 11 will make the switch drop ingress frames carrying
+ * a C-tag with VID != 0 for respective port.
+ */
+#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
+#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
+
+/* VLAN Ingress Control Register 2, one bit per port.
+ * bit0 .. bit5 will make the switch drop all ingress frames with
+ * a VLAN classification that does not include the port is in its
+ * member set.
+ */
#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
/* LED control registers */
/**
* struct rtl8366rb - RTL8366RB-specific data
* @max_mtu: per-port max MTU setting
+ * @pvid_enabled: if PVID is set for respective port
+ * @vlan_filtering: if VLAN filtering is enabled for respective port
*/
struct rtl8366rb {
unsigned int max_mtu[RTL8366RB_NUM_PORTS];
+ bool pvid_enabled[RTL8366RB_NUM_PORTS];
+ bool vlan_filtering[RTL8366RB_NUM_PORTS];
};
static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
if (ret)
return ret;
- /* Discard VLAN tagged packets if the port is not a member of
- * the VLAN with which the packets is associated.
- */
+ /* Accept all packets by default, we enable filtering on-demand */
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ 0);
+ if (ret)
+ return ret;
ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
- RTL8366RB_PORT_ALL);
+ 0);
if (ret)
return ret;
RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
}
+/**
+ * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
+ * @smi: SMI state container
+ * @port: the port to drop untagged and C-tagged frames on
+ * @drop: whether to drop or pass untagged and C-tagged frames
+ */
+static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop)
+{
+ return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
+ drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
+}
+
+static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_smi *smi = ds->priv;
+ struct rtl8366rb *rb;
+ int ret;
+
+ rb = smi->chip_data;
+
+ dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
+ vlan_filtering ? "enable" : "disable");
+
+ /* If the port is not in the member set, the frame will be dropped */
+ ret = regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ BIT(port), vlan_filtering ? BIT(port) : 0);
+ if (ret)
+ return ret;
+
+ /* Keep track if filtering is enabled on each port */
+ rb->vlan_filtering[port] = vlan_filtering;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. If we turn off VLAN
+ * filtering on a port, we need ti accept any frames.
+ */
+ if (vlan_filtering)
+ ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]);
+ else
+ ret = rtl8366rb_drop_untagged(smi, port, false);
+
+ return ret;
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;
static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
{
+ struct rtl8366rb *rb;
+ bool pvid_enabled;
+ int ret;
+
+ rb = smi->chip_data;
+ pvid_enabled = !!index;
+
if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS)
return -EINVAL;
- return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
RTL8366RB_PORT_VLAN_CTRL_MASK <<
RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
(index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
+ if (ret)
+ return ret;
+
+ rb->pvid_enabled[port] = pvid_enabled;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. Make sure to update the
+ * filtering setting.
+ */
+ if (rb->vlan_filtering[port])
+ ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled);
+
+ return ret;
}
static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
if (smi->vlan4k_enabled)
max = RTL8366RB_NUM_VIDS - 1;
- if (vlan == 0 || vlan > max)
+ if (vlan > max)
return false;
return true;
.get_sset_count = rtl8366_get_sset_count,
.port_bridge_join = rtl8366rb_port_bridge_join,
.port_bridge_leave = rtl8366rb_port_bridge_leave,
- .port_vlan_filtering = rtl8366_vlan_filtering,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
.port_vlan_add = rtl8366_vlan_add,
.port_vlan_del = rtl8366_vlan_del,
.port_enable = rtl8366rb_port_enable,