iwlwifi: trans: divide stop_hw into stop_device/op_mode_leave
authorArik Nemtsov <arik@wizery.com>
Sun, 24 Nov 2013 17:10:46 +0000 (19:10 +0200)
committerEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Tue, 17 Dec 2013 17:39:46 +0000 (19:39 +0200)
The stop_hw trans callback is not well defined. It is missing in many
cleanup flows and the division of labor between stop_device/stop_hw
is cumbersome. Remove stop_hw and use stop_device to perform both.
Implement this for all current transports.

PCIE needs some extra configuration the op-mode is leaving to configure
RF kill. Expose this explicitly as a new op_mode_leave trans callback.
Take the call to stop_device outside iwl_run_mvm_init_ucode, this
makes more sense and WARN when we want to run the INIT firmware while
it has run already.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
drivers/net/wireless/iwlwifi/dvm/mac80211.c
drivers/net/wireless/iwlwifi/dvm/main.c
drivers/net/wireless/iwlwifi/iwl-trans.h
drivers/net/wireless/iwlwifi/mvm/fw.c
drivers/net/wireless/iwlwifi/mvm/mac80211.c
drivers/net/wireless/iwlwifi/mvm/ops.c
drivers/net/wireless/iwlwifi/mvm/tt.c
drivers/net/wireless/iwlwifi/pcie/trans.c

index 217f1ca..9f4239d 100644 (file)
@@ -322,12 +322,6 @@ static void iwlagn_mac_stop(struct ieee80211_hw *hw)
 
        flush_workqueue(priv->workqueue);
 
-       /* User space software may expect getting rfkill changes
-        * even if interface is down, trans->down will leave the RF
-        * kill interrupt enabled
-        */
-       iwl_trans_stop_hw(priv->trans, false);
-
        IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
index 7aad766..fd9f6cf 100644 (file)
@@ -1313,7 +1313,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
        }
 
        /* Reset chip to save power until we load uCode during "up". */
-       iwl_trans_stop_hw(priv->trans, false);
+       iwl_trans_stop_device(priv->trans);
 
        priv->nvm_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg,
                                                  priv->eeprom_blob,
@@ -1458,7 +1458,7 @@ static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
 
        dev_kfree_skb(priv->beacon_skb);
 
-       iwl_trans_stop_hw(priv->trans, true);
+       iwl_trans_op_mode_leave(priv->trans);
        ieee80211_free_hw(priv->hw);
 }
 
index 143292b..43ea124 100644 (file)
  *        start_fw
  *
  *     5) Then when finished (or reset):
- *        stop_fw (a.k.a. stop device for the moment)
- *        stop_hw
+ *        stop_device
  *
  *     6) Eventually, the free function will be called.
  */
@@ -361,9 +360,7 @@ struct iwl_trans;
  *
  * @start_hw: starts the HW- from that point on, the HW can send interrupts
  *     May sleep
- * @stop_hw: stops the HW- from that point on, the HW will be in low power but
- *     will still issue interrupt if the HW RF kill is triggered unless
- *     op_mode_leaving is true.
+ * @op_mode_leave: Turn off the HW RF kill indication if on
  *     May sleep
  * @start_fw: allocates and inits all the resources for the transport
  *     layer. Also kick a fw image.
@@ -371,8 +368,11 @@ struct iwl_trans;
  * @fw_alive: called when the fw sends alive notification. If the fw provides
  *     the SCD base address in SRAM, then provide it here, or 0 otherwise.
  *     May sleep
- * @stop_device:stops the whole device (embedded CPU put to reset)
- *     May sleep
+ * @stop_device: stops the whole device (embedded CPU put to reset) and stops
+ *     the HW. From that point on, the HW will be in low power but will still
+ *     issue interrupt if the HW RF kill is triggered. This callback must do
+ *     the right thing and not crash even if start_hw() was called but not
+ *     start_fw(). May sleep
  * @d3_suspend: put the device into the correct mode for WoWLAN during
  *     suspend. This is optional, if not implemented WoWLAN will not be
  *     supported. This callback may sleep.
@@ -418,7 +418,7 @@ struct iwl_trans;
 struct iwl_trans_ops {
 
        int (*start_hw)(struct iwl_trans *iwl_trans);
-       void (*stop_hw)(struct iwl_trans *iwl_trans, bool op_mode_leaving);
+       void (*op_mode_leave)(struct iwl_trans *iwl_trans);
        int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
                        bool run_in_rfkill);
        void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
@@ -540,15 +540,14 @@ static inline int iwl_trans_start_hw(struct iwl_trans *trans)
        return trans->ops->start_hw(trans);
 }
 
-static inline void iwl_trans_stop_hw(struct iwl_trans *trans,
-                                    bool op_mode_leaving)
+static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
 {
        might_sleep();
 
-       trans->ops->stop_hw(trans, op_mode_leaving);
+       if (trans->ops->op_mode_leave)
+               trans->ops->op_mode_leave(trans);
 
-       if (op_mode_leaving)
-               trans->op_mode = NULL;
+       trans->op_mode = NULL;
 
        trans->state = IWL_TRANS_NO_FW;
 }
index b2bfa73..27ba104 100644 (file)
@@ -241,7 +241,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 
        lockdep_assert_held(&mvm->mutex);
 
-       if (mvm->init_ucode_complete)
+       if (WARN_ON_ONCE(mvm->init_ucode_complete))
                return 0;
 
        iwl_init_notification_wait(&mvm->notif_wait,
@@ -287,7 +287,8 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
                IWL_DEBUG_RF_KILL(mvm,
                                  "jump over all phy activities due to RF kill\n");
                iwl_remove_notification(&mvm->notif_wait, &calib_wait);
-               return 1;
+               ret = 1;
+               goto out;
        }
 
        /* Send TX valid antennas before triggering calibrations */
@@ -319,9 +320,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 error:
        iwl_remove_notification(&mvm->notif_wait, &calib_wait);
 out:
-       if (!iwlmvm_mod_params.init_dbg) {
-               iwl_trans_stop_device(mvm->trans);
-       } else if (!mvm->nvm_data) {
+       if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
                /* we want to debug INIT and we have no NVM - fake */
                mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
                                        sizeof(struct ieee80211_channel) +
@@ -370,11 +369,16 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
                                ret = -ERFKILL;
                        goto error;
                }
-               /* should stop & start HW since that INIT image just loaded */
-               iwl_trans_stop_hw(mvm->trans, false);
-               ret = iwl_trans_start_hw(mvm->trans);
-               if (ret)
-                       return ret;
+               if (!iwlmvm_mod_params.init_dbg) {
+                       /*
+                        * should stop and start HW since that INIT
+                        * image just loaded
+                        */
+                       iwl_trans_stop_device(mvm->trans);
+                       ret = iwl_trans_start_hw(mvm->trans);
+                       if (ret)
+                               return ret;
+               }
        }
 
        if (iwlmvm_mod_params.init_dbg)
index fbd3114..272aabd 100644 (file)
@@ -405,7 +405,6 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac,
 static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 {
        iwl_trans_stop_device(mvm->trans);
-       iwl_trans_stop_hw(mvm->trans, false);
 
        mvm->scan_status = IWL_MVM_SCAN_NONE;
 
@@ -477,7 +476,6 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
        cancel_work_sync(&mvm->roc_done_wk);
 
        iwl_trans_stop_device(mvm->trans);
-       iwl_trans_stop_hw(mvm->trans, false);
 
        iwl_mvm_async_handlers_purge(mvm);
        /* async_handlers_list is empty and will stay empty: HW is stopped */
index 668525f..a6f4be8 100644 (file)
@@ -436,16 +436,13 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
                mutex_lock(&mvm->mutex);
                err = iwl_run_init_mvm_ucode(mvm, true);
+               iwl_trans_stop_device(trans);
                mutex_unlock(&mvm->mutex);
                /* returns 0 if successful, 1 if success but in rfkill */
                if (err < 0 && !iwlmvm_mod_params.init_dbg) {
                        IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", err);
                        goto out_free;
                }
-
-               /* Stop the hw after the ALIVE and NVM has been read */
-               if (!iwlmvm_mod_params.init_dbg)
-                       iwl_trans_stop_hw(mvm->trans, false);
        }
 
        scan_size = sizeof(struct iwl_scan_cmd) +
@@ -478,7 +475,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
        iwl_phy_db_free(mvm->phy_db);
        kfree(mvm->scan_cmd);
        if (!iwlwifi_mod_params.nvm_file)
-               iwl_trans_stop_hw(trans, true);
+               iwl_trans_op_mode_leave(trans);
        ieee80211_free_hw(mvm->hw);
        return NULL;
 }
@@ -502,7 +499,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
        kfree(mvm->d3_resume_sram);
 #endif
 
-       iwl_trans_stop_hw(mvm->trans, true);
+       iwl_trans_op_mode_leave(mvm->trans);
 
        iwl_phy_db_free(mvm->phy_db);
        mvm->phy_db = NULL;
index 18be04d..a0ec7b3 100644 (file)
@@ -340,7 +340,7 @@ static void check_exit_ctkill(struct work_struct *work)
 
        iwl_trans_start_hw(mvm->trans);
        temp = check_nic_temperature(mvm);
-       iwl_trans_stop_hw(mvm->trans, false);
+       iwl_trans_stop_device(mvm->trans);
 
        if (temp < MIN_TEMPERATURE || temp > MAX_TEMPERATURE) {
                IWL_DEBUG_TEMP(mvm, "Failed to measure NIC temperature\n");
index cde9c16..43eed4d 100644 (file)
@@ -641,6 +641,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 {
        struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
        unsigned long flags;
+       bool hw_rfkill;
 
        /* tell the device to stop sending interrupts */
        spin_lock_irqsave(&trans_pcie->irq_lock, flags);
@@ -681,8 +682,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
        iwl_disable_interrupts(trans);
        spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 
-       iwl_enable_rfkill_int(trans);
-
        /* stop and reset the on-board processor */
        iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 
@@ -692,6 +691,25 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
        clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
        clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
        clear_bit(STATUS_RFKILL, &trans_pcie->status);
+
+       /*
+        * Even if we stop the HW, we still want the RF kill
+        * interrupt
+        */
+       iwl_enable_rfkill_int(trans);
+
+       /*
+        * Check again since the RF kill state may have changed while
+        * all the interrupts were disabled, in this case we couldn't
+        * receive the RF kill interrupt and update the state in the
+        * op_mode.
+        */
+       hw_rfkill = iwl_is_rfkill_set(trans);
+       if (hw_rfkill)
+               set_bit(STATUS_RFKILL, &trans_pcie->status);
+       else
+               clear_bit(STATUS_RFKILL, &trans_pcie->status);
+       iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 }
 
 static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test)
@@ -806,13 +824,12 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
        return 0;
 }
 
-static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans,
-                                  bool op_mode_leaving)
+static void iwl_trans_pcie_op_mode_leave(struct iwl_trans *trans)
 {
        struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-       bool hw_rfkill;
        unsigned long flags;
 
+       /* disable interrupts - don't enable HW RF kill interrupt */
        spin_lock_irqsave(&trans_pcie->irq_lock, flags);
        iwl_disable_interrupts(trans);
        spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
@@ -824,27 +841,6 @@ static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans,
        spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 
        iwl_pcie_disable_ict(trans);
-
-       if (!op_mode_leaving) {
-               /*
-                * Even if we stop the HW, we still want the RF kill
-                * interrupt
-                */
-               iwl_enable_rfkill_int(trans);
-
-               /*
-                * Check again since the RF kill state may have changed while
-                * all the interrupts were disabled, in this case we couldn't
-                * receive the RF kill interrupt and update the state in the
-                * op_mode.
-                */
-               hw_rfkill = iwl_is_rfkill_set(trans);
-               if (hw_rfkill)
-                       set_bit(STATUS_RFKILL, &trans_pcie->status);
-               else
-                       clear_bit(STATUS_RFKILL, &trans_pcie->status);
-               iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
-       }
 }
 
 static void iwl_trans_pcie_write8(struct iwl_trans *trans, u32 ofs, u8 val)
@@ -1457,7 +1453,7 @@ static int iwl_trans_pcie_dbgfs_register(struct iwl_trans *trans,
 
 static const struct iwl_trans_ops trans_ops_pcie = {
        .start_hw = iwl_trans_pcie_start_hw,
-       .stop_hw = iwl_trans_pcie_stop_hw,
+       .op_mode_leave = iwl_trans_pcie_op_mode_leave,
        .fw_alive = iwl_trans_pcie_fw_alive,
        .start_fw = iwl_trans_pcie_start_fw,
        .stop_device = iwl_trans_pcie_stop_device,