global: Remove unused CONFIG defines

Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 9e76a4a..78a9cc1 100644 (file)
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -17,10 +17,6 @@
 #include <config.h>
 #include <linux/linkage.h>
 
-#ifndef CONFIG_SYS_PHY_UBOOT_BASE
-#define CONFIG_SYS_PHY_UBOOT_BASE      CFG_SYS_UBOOT_BASE
-#endif
-
 /*
  *************************************************************************
  *
@@ -88,7 +84,7 @@ cpu_init_crit:
 
        /* Prepare to disable the MMU */
        adr     r2, mmu_disable_phys
-       sub     r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_TEXT_BASE)
+       sub     r2, r2, #(CFG_SYS_UBOOT_BASE - CONFIG_TEXT_BASE)
        b       mmu_disable
 
        .align 5

diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 3090393..24f3b4e 100644 (file)
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -126,6 +126,4 @@
 #define ATMEL_PIO_PORTS                4       /* theese SoCs have 4 PIO */
 #define ATMEL_PMC_UHP          AT91RM9200_PMC_UHP
 
-#define CONFIG_SYS_ATMEL_CPU_NAME      "AT91RM9200"
-
 #endif

diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h
index dab8b26..0c23744 100644 (file)
--- a/arch/m68k/include/asm/immap.h
+++ b/arch/m68k/include/asm/immap.h
@@ -13,7 +13,6 @@
 #include <asm/immap_520x.h>
 #include <asm/m520x.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000))
 
 /* Timer */
@@ -36,7 +35,6 @@
 #include <asm/immap_5235.h>
 #include <asm/m5235.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40))
 
 /* Timer */
@@ -104,7 +102,6 @@
 #include <asm/immap_5271.h>
 #include <asm/m5271.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40))
 
 /* Timer */
@@ -127,7 +124,6 @@
 #include <asm/immap_5272.h>
 #include <asm/m5272.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40))
 
 #define CONFIG_SYS_INTR_BASE           (MMAP_INTC)
@@ -150,8 +146,6 @@
 #include <asm/immap_5275.h>
 #include <asm/m5275.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
-#define CONFIG_SYS_FEC1_IOBASE         (MMAP_FEC1)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40))
 
 #define CONFIG_SYS_INTR_BASE           (MMAP_INTC0)
@@ -174,7 +168,6 @@
 #include <asm/immap_5282.h>
 #include <asm/m5282.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40))
 
 #define CONFIG_SYS_INTR_BASE           (MMAP_INTC0)
@@ -221,8 +214,6 @@
 #include <asm/immap_5301x.h>
 #include <asm/m5301x.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
-#define CONFIG_SYS_FEC1_IOBASE         (MMAP_FEC1)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000))
 
 /* Timer */
@@ -245,7 +236,6 @@
 #include <asm/immap_5329.h>
 #include <asm/m5329.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000))
 
 /* Timer */
@@ -268,9 +258,6 @@
 #include <asm/immap_5441x.h>
 #include <asm/m5441x.h>
 
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
-#define CONFIG_SYS_FEC1_IOBASE         (MMAP_FEC1)
-
 #if (CFG_SYS_UART_PORT < 4)
 #define CONFIG_SYS_UART_BASE           (MMAP_UART0 + \
                                        (CFG_SYS_UART_PORT * 0x4000))
@@ -303,9 +290,6 @@
 #include <asm/m547x_8x.h>
 
 #ifdef CONFIG_FSLDMAFEC
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
-#define CONFIG_SYS_FEC1_IOBASE         (MMAP_FEC1)
-
 #define FEC0_RX_TASK           0
 #define FEC0_TX_TASK           1
 #define FEC0_RX_PRIORITY       6

diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index a7e1df1..3514250 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -92,7 +92,6 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
        }
 
 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
-#define        CONFIG_MEM_HOLE_16M     0x1000000
        /*
         * Extract hwconfig from environment.
         * Search for tdm entry in hwconfig.
@@ -103,8 +102,7 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 
        /* Reserve the memory hole created by TDM LAW, so OSes dont use it */
        if (tdm_hwconfig_enabled) {
-               off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE,
-                                     CONFIG_MEM_HOLE_16M);
+               off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, SZ_16);
                if (off < 0)
                        printf("Failed  to reserve memory for tdm: %s\n",
                               fdt_strerror(off));

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 19e63eb..f7e1a80 100644 (file)
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -980,37 +980,6 @@
 #define PVR_5200B      0x80822014
 
 /*
- * 405EX/EXr CHIP_21 Errata
- */
-#ifdef CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY
-#define CONFIG_SYS_4xx_CHIP_21_ERRATA
-#define CONFIG_405EX_CHIP21_PVR_REV_C  PVR_405EX1_RC
-#define CONFIG_405EX_CHIP21_PVR_REV_D  PVR_405EX1_RD
-#define CONFIG_405EX_CHIP21_ECID3_REV_D        0x0
-#endif
-
-#ifdef CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY
-#define CONFIG_SYS_4xx_CHIP_21_ERRATA
-#define CONFIG_405EX_CHIP21_PVR_REV_C  PVR_405EX2_RC
-#define CONFIG_405EX_CHIP21_PVR_REV_D  PVR_405EX2_RD
-#define CONFIG_405EX_CHIP21_ECID3_REV_D        0x1
-#endif
-
-#ifdef CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY
-#define CONFIG_SYS_4xx_CHIP_21_ERRATA
-#define CONFIG_405EX_CHIP21_PVR_REV_C  PVR_405EXR1_RC
-#define CONFIG_405EX_CHIP21_PVR_REV_D  PVR_405EXR1_RD
-#define CONFIG_405EX_CHIP21_ECID3_REV_D        0x2
-#endif
-
-#ifdef CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY
-#define CONFIG_SYS_4xx_CHIP_21_ERRATA
-#define CONFIG_405EX_CHIP21_PVR_REV_C  PVR_405EXR2_RC
-#define CONFIG_405EX_CHIP21_PVR_REV_D  PVR_405EXR2_RD
-#define CONFIG_405EX_CHIP21_ECID3_REV_D        0x3
-#endif
-
-/*
  * System Version Register
  */
 

diff --git a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c
index ee6d2bb..4dbd847 100644 (file)
--- a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c
+++ b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c
@@ -13,7 +13,6 @@
 #ifdef CONFIG_SPL_BUILD
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR_P1  0x51
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
 static iomux_v3_cfg_t const eeprom_pads[] = {
        IMX8MQ_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),

diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 0e026bb..9ae3e5e 100644 (file)
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -20,14 +20,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
-#define CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ (64 * 1024)
-#endif
-
-#ifndef CONFIG_SYS_BOOTM_LEN
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)
-#endif
-
 struct spl_fit_info {
        const void *fit;        /* Pointer to a valid FIT blob */
        size_t ext_data_offset; /* Offset to FIT external data (end of FIT) */
@@ -408,7 +400,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
        if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY))
                return 0;
 
-       if (CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)) {
+#if CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)
                void *tmpbuffer = NULL;
 
                for (; ; index++) {
@@ -462,7 +454,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
                free(tmpbuffer);
                if (ret)
                        return ret;
-       }
+#endif
        /* Try to make space, so we can inject details on the loadables */
        ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
        if (ret < 0)

diff --git a/doc/README.socfpga b/doc/README.socfpga
index 4d73398..e5adb62 100644 (file)
--- a/doc/README.socfpga
+++ b/doc/README.socfpga
@@ -6,16 +6,6 @@ This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore
 based SOCFPGA. To know more about the hardware itself, please refer to
 www.altera.com.
 
-
-socfpga_dw_mmc
---------------
-
-Here are macro and detailed configuration required to enable DesignWare SDMMC
-controller support within SOCFPGA
-
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT   256
--> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM
-
 ---------------------------------------------------------------------
 Cyclone 5 / Arria 5 generating the handoff header files for U-Boot SPL
 ---------------------------------------------------------------------

diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index c72839e..ed8ba47 100644 (file)
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -88,13 +88,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #  define I2C_SOFT_DECLARATIONS
 #endif
 
-#if !defined(CONFIG_SYS_I2C_SOFT_SPEED)
-#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
-#endif
-#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE)
-#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
-#endif
-
 /*-----------------------------------------------------------------------
  * Definitions
  */

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e2bd326..3ac0b19 100644 (file)
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -86,13 +86,7 @@ static bool fm_debug;
 #endif
 #else
 #ifdef CONFIG_MTD_UBI_FASTMAP
-#if !defined(CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT)
-#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 0
-#endif
 static bool fm_autoconvert = CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT;
-#if !defined(CONFIG_MTD_UBI_FM_DEBUG)
-#define CONFIG_MTD_UBI_FM_DEBUG 0
-#endif
 static bool fm_debug = CONFIG_MTD_UBI_FM_DEBUG;
 #endif
 #endif

diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index a042450..0a1fe56 100644 (file)
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -168,9 +168,7 @@ struct descriptor {         /* A generic descriptor. */
        unsigned char params[0];
 };
 
-#define CONFIG_SYS_CMD_EL              0x8000
 #define CONFIG_SYS_CMD_SUSPEND         0x4000
-#define CONFIG_SYS_CMD_INT             0x2000
 #define CONFIG_SYS_CMD_IAS             0x0001  /* individual address setup */
 #define CONFIG_SYS_CMD_CONFIGURE       0x0002  /* configure */
 

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 8c9afdf..7e1922e 100644 (file)
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -66,8 +66,6 @@ do {                                                                  \
 
 #define NET_SKB_PAD    max(32, MVPP2_CPU_D_CACHE_LINE_SIZE)
 
-#define CONFIG_NR_CPUS         1
-
 /* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
 #define WRAP                   (2 + ETH_HLEN + 4 + 32)
 #define MTU                    1500

diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c
index aadd54b..72a13d3 100644 (file)
--- a/drivers/video/vidconsole-uclass.c
+++ b/drivers/video/vidconsole-uclass.c
@@ -19,11 +19,6 @@
 #include <video_font.h>                /* Bitmap font for code page 437 */
 #include <linux/ctype.h>
 
-/* By default we scroll by a single line */
-#ifndef CONFIG_CONSOLE_SCROLL_LINES
-#define CONFIG_CONSOLE_SCROLL_LINES 1
-#endif
-
 int vidconsole_putc_xy(struct udevice *dev, uint x, uint y, char ch)
 {
        struct vidconsole_ops *ops = vidconsole_get_ops(dev);

diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
index 69ef736..35955a5 100644 (file)
--- a/drivers/video/videomodes.c
+++ b/drivers/video/videomodes.c
@@ -7,8 +7,7 @@
 
 /************************************************************************
   Get Parameters for the video mode:
-  The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE.
-  If undefined, default video mode is set to 0x301
+  The default video mode is set to 0x301
   Parameters can be set via the variable "videomode" in the environment.
   2 diferent ways are possible:
   "videomode=301"   - 301 is a hexadecimal number describing the VESA

diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h
index aefe4ef..405f4e1 100644 (file)
--- a/drivers/video/videomodes.h
+++ b/drivers/video/videomodes.h
@@ -6,10 +6,6 @@
 
 #include <edid.h>
 
-#ifndef CONFIG_SYS_DEFAULT_VIDEO_MODE
-#define CONFIG_SYS_DEFAULT_VIDEO_MODE  0x301
-#endif
-
 /* Some mode definitions */
 #define FB_SYNC_HOR_HIGH_ACT   1       /* horizontal sync high active  */
 #define FB_SYNC_VERT_HIGH_ACT  2       /* vertical sync high active    */

diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h
index 24229f6..f336c6a 100644 (file)
--- a/include/fsl_ddr.h
+++ b/include/fsl_ddr.h
@@ -50,13 +50,12 @@ compute_dimm_parameters(const unsigned int ctrl_num,
  *
  * All data structures have to be on the stack
  */
-#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
 
 typedef struct {
        generic_spd_eeprom_t
-          spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
+          spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR];
        struct dimm_params_s
-          dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
+          dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR];
        memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
        common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
        fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];

diff --git a/include/fsl_usb.h b/include/fsl_usb.h
index c0f076b..a37a6e5 100644 (file)
--- a/include/fsl_usb.h
+++ b/include/fsl_usb.h
@@ -43,10 +43,8 @@ struct ccsr_usb_phy {
 #define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
 #define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
 #define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
-#define CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV (1 << 0)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
-#define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13)
 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 #define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK (5 << 4)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK (6 << 16)
@@ -55,7 +53,6 @@ struct ccsr_usb_phy {
 #define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
-#define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0)
 #define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN (1 << 7)
 #define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK (3 << 4)