do {
int err = get_card_status(card, &status, 5);
if (err) {
- printk(KERN_ERR "%s: error %d requesting status\n",
+ pr_err("%s: error %d requesting status\n",
req->rq_disk->disk_name, err);
return MMC_BLK_CMD_ERR;
}
* were returned by the host controller, it's a bug.
*/
if (status == MMC_BLK_SUCCESS && ret) {
- printk(KERN_ERR "%s BUG rq_tot %d d_xfer %d\n",
+ pr_err("%s BUG rq_tot %d d_xfer %d\n",
__func__, blk_rq_bytes(req),
brq->data.bytes_xfered);
rqc = NULL;
string_get_size((u64)get_capacity(part_md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
- printk(KERN_INFO "%s: %s %s partition %u %s\n",
+ pr_info("%s: %s %s partition %u %s\n",
part_md->disk->disk_name, mmc_card_id(card),
mmc_card_name(card), part_md->part_type, cap_str);
return 0;
mmc_release_host(card->host);
if (err) {
- printk(KERN_ERR "%s: unable to set block size to 512: %d\n",
+ pr_err("%s: unable to set block size to 512: %d\n",
md->disk->disk_name, err);
return -EINVAL;
}
string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
- printk(KERN_INFO "%s: %s %s %s %s\n",
+ pr_info("%s: %s %s %s %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
cap_str, md->read_only ? "(ro)" : "");
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- printk(KERN_INFO "%s: Warning: Host did not "
+ pr_info("%s: Warning: Host did not "
"wait for busy state to end.\n",
mmc_hostname(test->card->host));
}
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
+ pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
"seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
mmc_hostname(test->card->host), sectors, sectors >> 1,
(sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
+ pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
"%lu.%09lu seconds (%u kB/s, %u KiB/s, "
"%u.%02u IOPS, sg_len %d)\n",
mmc_hostname(test->card->host), count, sectors, count,
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
- printk(KERN_INFO "%s: Highmem not configured - test skipped\n",
+ pr_info("%s: Highmem not configured - test skipped\n",
mmc_hostname(test->card->host));
return 0;
}
t->max_seg_sz, &t->sg_len, min_sg_len);
}
if (err)
- printk(KERN_INFO "%s: Failed to map sg list\n",
+ pr_info("%s: Failed to map sg list\n",
mmc_hostname(test->card->host));
return err;
}
return ret;
err:
- printk(KERN_INFO "[%s] error\n", __func__);
+ pr_info("[%s] error\n", __func__);
return ret;
}
if (rw->do_nonblock_req &&
((!pre_req && post_req) || (pre_req && !post_req))) {
- printk(KERN_INFO "error: only one of pre/post is defined\n");
+ pr_info("error: only one of pre/post is defined\n");
return -EINVAL;
}
{
int i, ret;
- printk(KERN_INFO "%s: Starting tests of card %s...\n",
+ pr_info("%s: Starting tests of card %s...\n",
mmc_hostname(test->card->host), mmc_card_id(test->card));
mmc_claim_host(test->card->host);
if (testcase && ((i + 1) != testcase))
continue;
- printk(KERN_INFO "%s: Test case %d. %s...\n",
+ pr_info("%s: Test case %d. %s...\n",
mmc_hostname(test->card->host), i + 1,
mmc_test_cases[i].name);
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- printk(KERN_INFO "%s: Result: Prepare "
+ pr_info("%s: Result: Prepare "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
ret = mmc_test_cases[i].run(test);
switch (ret) {
case RESULT_OK:
- printk(KERN_INFO "%s: Result: OK\n",
+ pr_info("%s: Result: OK\n",
mmc_hostname(test->card->host));
break;
case RESULT_FAIL:
- printk(KERN_INFO "%s: Result: FAILED\n",
+ pr_info("%s: Result: FAILED\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_HOST:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by host)\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_CARD:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by card)\n",
mmc_hostname(test->card->host));
break;
default:
- printk(KERN_INFO "%s: Result: ERROR (%d)\n",
+ pr_info("%s: Result: ERROR (%d)\n",
mmc_hostname(test->card->host), ret);
}
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- printk(KERN_INFO "%s: Warning: Cleanup "
+ pr_info("%s: Warning: Cleanup "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
mmc_release_host(test->card->host);
- printk(KERN_INFO "%s: Tests completed.\n",
+ pr_info("%s: Tests completed.\n",
mmc_hostname(test->card->host));
}
if (bouncesz > 512) {
mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_cur->bounce_buf) {
- printk(KERN_WARNING "%s: unable to "
+ pr_warning("%s: unable to "
"allocate bounce cur buffer\n",
mmc_card_name(card));
}
mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_prev->bounce_buf) {
- printk(KERN_WARNING "%s: unable to "
+ pr_warning("%s: unable to "
"allocate bounce prev buffer\n",
mmc_card_name(card));
kfree(mqrq_cur->bounce_buf);
return -ENOMEM;
if (func->class == SDIO_CLASS_UART) {
- printk(KERN_WARNING "%s: need info on UART class basic setup\n",
+ pr_warning("%s: need info on UART class basic setup\n",
sdio_func_id(func));
kfree(port);
return -ENOSYS;
break;
}
if (!tpl) {
- printk(KERN_WARNING
+ pr_warning(
"%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
}
- printk(KERN_DEBUG "%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
+ pr_debug("%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
sdio_func_id(func), tpl->data[2], tpl->data[3]);
port->regs_offset = (tpl->data[4] << 0) |
(tpl->data[5] << 8) |
(tpl->data[6] << 16);
- printk(KERN_DEBUG "%s: regs offset = 0x%x\n",
+ pr_debug("%s: regs offset = 0x%x\n",
sdio_func_id(func), port->regs_offset);
port->uartclk = tpl->data[7] * 115200;
if (port->uartclk == 0)
port->uartclk = 115200;
- printk(KERN_DEBUG "%s: clk %d baudcode %u 4800-div %u\n",
+ pr_debug("%s: clk %d baudcode %u 4800-div %u\n",
sdio_func_id(func), port->uartclk,
tpl->data[7], tpl->data[8] | (tpl->data[9] << 8));
} else {
}
if (mmc_host_is_spi(card->host)) {
- printk(KERN_INFO "%s: new %s%s%s card on SPI\n",
+ pr_info("%s: new %s%s%s card on SPI\n",
mmc_hostname(card->host),
mmc_card_highspeed(card) ? "high speed " : "",
mmc_card_ddr_mode(card) ? "DDR " : "",
if (mmc_card_present(card)) {
if (mmc_host_is_spi(card->host)) {
- printk(KERN_INFO "%s: SPI card removed\n",
+ pr_info("%s: SPI card removed\n",
mmc_hostname(card->host));
} else {
- printk(KERN_INFO "%s: card %04x removed\n",
+ pr_info("%s: card %04x removed\n",
mmc_hostname(card->host), card->rca);
}
device_del(&card->dev);
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: group start error %d, "
+ pr_err("mmc_erase: group start error %d, "
"status %#x\n", err, cmd.resp[0]);
err = -EIO;
goto out;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n",
+ pr_err("mmc_erase: group end error %d, status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
+ pr_err("mmc_erase: erase error %d, status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
/* Do not retry else we can't see errors */
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err || (cmd.resp[0] & 0xFDF92000)) {
- printk(KERN_ERR "error %d requesting status %#x\n",
+ pr_err("error %d requesting status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
BUG_ON(!host->bus_ops->resume);
err = host->bus_ops->resume(host);
if (err) {
- printk(KERN_WARNING "%s: error %d during resume "
+ pr_warning("%s: error %d during resume "
"(card was removed?)\n",
mmc_hostname(host), err);
err = 0;
break;
default:
- printk(KERN_ERR "%s: card has unknown MMCA version %d\n",
+ pr_err("%s: card has unknown MMCA version %d\n",
mmc_hostname(card->host), card->csd.mmca_vsn);
return -EINVAL;
}
*/
csd->structure = UNSTUFF_BITS(resp, 126, 2);
if (csd->structure == 0) {
- printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
+ pr_err("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd->structure);
return -EINVAL;
}
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
- printk(KERN_ERR "%s: could not allocate a buffer to "
+ pr_err("%s: could not allocate a buffer to "
"receive the ext_csd.\n", mmc_hostname(card->host));
return -ENOMEM;
}
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
- printk(KERN_ERR "%s: unable to read EXT_CSD "
+ pr_err("%s: unable to read EXT_CSD "
"on a possible high capacity card. "
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
- printk(KERN_WARNING "%s: unable to read "
+ pr_warning("%s: unable to read "
"EXT_CSD, performance might "
"suffer.\n",
mmc_hostname(card->host));
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
if (card->ext_csd.raw_ext_csd_structure > 2) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
+ pr_err("%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
if (card->ext_csd.rev > 6) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n",
+ pr_err("%s: unrecognised EXT_CSD revision %d\n",
mmc_hostname(card->host), card->ext_csd.rev);
err = -EINVAL;
goto out;
break;
default:
/* MMC v4 spec says this cannot happen */
- printk(KERN_WARNING "%s: card is mmc v4 but doesn't "
+ pr_warning("%s: card is mmc v4 but doesn't "
"support any high-speed modes.\n",
mmc_hostname(card->host));
}
goto free_card;
if (err) {
- printk(KERN_WARNING "%s: switch to highspeed failed\n",
+ pr_warning("%s: switch to highspeed failed\n",
mmc_hostname(card->host));
err = 0;
} else {
card->ext_csd.generic_cmd6_time);
}
if (err) {
- printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
+ pr_warning("%s: switch to bus width %d ddr %d "
"failed\n", mmc_hostname(card->host),
1 << bus_width, ddr);
goto free_card;
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising MMC card\n",
+ pr_err("%s: error %d whilst initialising MMC card\n",
mmc_hostname(host), err);
return err;
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- printk(KERN_WARNING "%s: unexpected status %#x after "
+ pr_warning("%s: unexpected status %#x after "
"switch", mmc_hostname(card->host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
else if (len == 4)
test_buf = testdata_4bit;
else {
- printk(KERN_ERR "%s: Invalid bus_width %d\n",
+ pr_err("%s: Invalid bus_width %d\n",
mmc_hostname(host), len);
kfree(data_buf);
return -EINVAL;
csd->erase_size = 1;
break;
default:
- printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
+ pr_err("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd_struct);
return -EINVAL;
}
scr_struct = UNSTUFF_BITS(resp, 60, 4);
if (scr_struct != 0) {
- printk(KERN_ERR "%s: unrecognised SCR structure version %d\n",
+ pr_err("%s: unrecognised SCR structure version %d\n",
mmc_hostname(card->host), scr_struct);
return -EINVAL;
}
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
- printk(KERN_WARNING "%s: card lacks mandatory SD Status "
+ pr_warning("%s: card lacks mandatory SD Status "
"function.\n", mmc_hostname(card->host));
return 0;
}
err = mmc_app_sd_status(card, ssr);
if (err) {
- printk(KERN_WARNING "%s: problem reading SD Status "
+ pr_warning("%s: problem reading SD Status "
"register.\n", mmc_hostname(card->host));
err = 0;
goto out;
card->ssr.erase_offset = eo * 1000;
}
} else {
- printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit "
+ pr_warning("%s: SD Status: Invalid Allocation Unit "
"size.\n", mmc_hostname(card->host));
}
out:
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
- printk(KERN_WARNING "%s: card lacks mandatory switch "
+ pr_warning("%s: card lacks mandatory switch "
"function, performance might suffer.\n",
mmc_hostname(card->host));
return 0;
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n",
mmc_hostname(card->host));
return -ENOMEM;
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading Bus Speed modes.\n",
+ pr_warning("%s: problem reading Bus Speed modes.\n",
mmc_hostname(card->host));
err = 0;
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading "
+ pr_warning("%s: problem reading "
"Driver Strength.\n",
mmc_hostname(card->host));
err = 0;
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading "
+ pr_warning("%s: problem reading "
"Current Limit.\n",
mmc_hostname(card->host));
err = 0;
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
return -ENOMEM;
}
goto out;
if ((status[16] & 0xF) != 1) {
- printk(KERN_WARNING "%s: Problem switching card "
+ pr_warning("%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
return err;
if ((status[15] & 0xF) != drive_strength) {
- printk(KERN_WARNING "%s: Problem setting drive strength!\n",
+ pr_warning("%s: Problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- printk(KERN_WARNING "%s: Problem setting bus speed mode!\n",
+ pr_warning("%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- printk(KERN_WARNING "%s: Problem setting current limit!\n",
+ pr_warning("%s: Problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
return -ENOMEM;
}
ro = host->ops->get_ro(host);
if (ro < 0) {
- printk(KERN_WARNING "%s: host does not "
+ pr_warning("%s: host does not "
"support reading read-only "
"switch. assuming write-enable.\n",
mmc_hostname(host));
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
if ((ocr & MMC_VDD_165_195) &&
!(host->ocr_avail_sd & MMC_VDD_165_195)) {
- printk(KERN_WARNING "%s: SD card claims to support the "
+ pr_warning("%s: SD card claims to support the "
"incompletely defined 'low voltage range'. This "
"will be ignored.\n", mmc_hostname(host));
ocr &= ~MMC_VDD_165_195;
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising SD card\n",
+ pr_err("%s: error %d whilst initialising SD card\n",
mmc_hostname(host), err);
return err;
cccr_vsn = data & 0x0f;
if (cccr_vsn > SDIO_CCCR_REV_1_20) {
- printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n",
+ pr_err("%s: unrecognised CCCR structure version %d\n",
mmc_hostname(card->host), cccr_vsn);
return -EINVAL;
}
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n",
+ pr_err("%s: error %d whilst initialising SDIO card\n",
mmc_hostname(host), err);
return err;
drv->remove(func);
if (func->irq_handler) {
- printk(KERN_WARNING "WARNING: driver %s did not remove "
+ pr_warning("WARNING: driver %s did not remove "
"its interrupt handler!\n", drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
ret = -EINVAL;
}
if (ret && ret != -EILSEQ && ret != -ENOENT) {
- printk(KERN_ERR "%s: bad %s tuple 0x%02x (%u bytes)\n",
+ pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",
mmc_hostname(card->host), tpl_descr, code, size);
}
} else {
if (ret == -ENOENT) {
/* warn about unknown tuples */
- printk(KERN_WARNING "%s: queuing unknown"
+ pr_warning("%s: queuing unknown"
" CIS tuple 0x%02x (%u bytes)\n",
mmc_hostname(card->host),
tpl_code, tpl_link);
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
if (ret) {
- printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n",
+ pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
mmc_card_id(card), ret);
return ret;
}
if (pending & (1 << i)) {
func = card->sdio_func[i - 1];
if (!func) {
- printk(KERN_WARNING "%s: pending IRQ for "
+ pr_warning("%s: pending IRQ for "
"non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
func->irq_handler(func);
count++;
} else {
- printk(KERN_WARNING "%s: pending IRQ with no handler\n",
+ pr_warning("%s: pending IRQ with no handler\n",
sdio_func_id(func));
ret = -EINVAL;
}
#ifdef DEBUG
#define DBG(fmt, idx, args...) \
- printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
+ pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
#else
#define DBG(fmt, idx, args...) do {} while (0)
#endif
mmccmd |= SD_CMD_RT_3;
break;
default:
- printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
+ pr_info("au1xmmc: unhandled response type %02x\n",
mmc_resp_type(cmd));
return -EINVAL;
}
#ifdef CONFIG_SOC_AU1200
ret = au1xmmc_dbdma_init(host);
if (ret)
- printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
#endif
#ifdef CONFIG_LEDS_CLASS
platform_set_drvdata(pdev, host);
- printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
+ pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
" (mode=%s)\n", pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
*/
memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
if (!memid)
- printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
+ pr_err("au1xmmc: cannot add memory dbdma dev\n");
#endif
return platform_driver_register(&au1xmmc_driver);
}
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
} else
regulator_enable(host->vmmc);
int ret = 0, irq;
u16 rev_no;
- printk(KERN_INFO "i.MX mmc driver\n");
+ pr_info("i.MX mmc driver\n");
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
struct mmci_host_next *next = &host->next_data;
if (data->host_cookie && data->host_cookie != next->cookie) {
- printk(KERN_WARNING "[%s] invalid cookie: data->host_cookie %d"
+ pr_warning("[%s] invalid cookie: data->host_cookie %d"
" host->next_data.cookie %d\n",
__func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
host->dma.num_ents, host->dma.dir);
if (n == 0) {
- printk(KERN_ERR "%s: Unable to map in all sg elements\n",
+ pr_err("%s: Unable to map in all sg elements\n",
mmc_hostname(host->mmc));
host->dma.sg = NULL;
host->dma.num_ents = 0;
*c |= MCI_CSPM_MCIABORT;
if (host->curr.cmd != NULL) {
- printk(KERN_ERR "%s: Overlapping command requests\n",
+ pr_err("%s: Overlapping command requests\n",
mmc_hostname(host->mmc));
}
host->curr.cmd = cmd;
{
struct msmsdcc_host *host = dev_id;
- printk(KERN_DEBUG "%s: %d\n", __func__, irq);
+ pr_debug("%s: %d\n", __func__, irq);
msmsdcc_check_status((unsigned long) host);
return IRQ_HANDLED;
}
{
struct msmsdcc_host *host = dev_id;
- printk(KERN_DEBUG "%s: card_present %d\n", mmc_hostname(host->mmc),
+ pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc),
card_present);
msmsdcc_check_status((unsigned long) host);
}
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- printk(KERN_DEBUG "%s: fallback to PIO for data "
+ pr_debug("%s: fallback to PIO for data "
"at 0x%p size %d\n",
mmc_hostname(host->mmc),
host->pio_ptr, host->pio_size);
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data, err_status);
if (err_status) {
- printk(KERN_ERR "%s: unhandled error status %#04x\n",
+ pr_err("%s: unhandled error status %#04x\n",
mmc_hostname(host->mmc), err_status);
cmd->error = -ENOMSG;
}
if (irq_handled)
return IRQ_HANDLED;
- printk(KERN_ERR "%s: unhandled interrupt status=0x%04x en=0x%04x "
+ pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
"pio=%d\n", mmc_hostname(host->mmc), intr_status,
host->intr_en, host->pio_size);
return IRQ_NONE;
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware interrupt.\n",
+ pr_err("%s: Timeout waiting for hardware interrupt.\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: hw_state=0x%04x, intr_status=0x%04x "
+ pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
"intr_en=0x%04x\n", mmc_hostname(host->mmc),
mvsd_read(MVSD_HW_STATE),
mvsd_read(MVSD_NOR_INTR_STATUS),
ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
- printk(KERN_ERR "%s: cannot assign irq %d\n", DRIVER_NAME, irq);
+ pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
goto out;
} else
host->irq = irq;
if (ret)
goto out;
- printk(KERN_NOTICE "%s: %s driver initialized, ",
+ pr_notice("%s: %s driver initialized, ",
mmc_hostname(mmc), DRIVER_NAME);
if (host->gpio_card_detect)
printk("using GPIO %d for card detection\n",
int ret = 0, irq;
dma_cap_mask_t mask;
- printk(KERN_INFO "i.MX SDHC driver\n");
+ pr_info("i.MX SDHC driver\n");
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
host->reqs_blocked = 0;
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
if (host->protect_card) {
- printk(KERN_INFO "%s: cover is closed, "
+ pr_info("%s: cover is closed, "
"card is now accessible\n",
mmc_hostname(host->mmc));
host->protect_card = 0;
}
} else {
if (!host->protect_card) {
- printk(KERN_INFO "%s: cover is open, "
+ pr_info"%s: cover is open, "
"card is now inaccessible\n",
mmc_hostname(host->mmc));
host->protect_card = 1;
if (!next && data->host_cookie &&
data->host_cookie != host->next_data.cookie) {
- printk(KERN_WARNING "[%s] invalid cookie: data->host_cookie %d"
+ pr_warning("[%s] invalid cookie: data->host_cookie %d"
" host->next_data.cookie %d\n",
__func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
if (dcsr & DCSR_ENDINTR) {
writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
} else {
- printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
+ pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
mmc_hostname(host->mmc), dma, dcsr);
host->data->error = -EIO;
pxamci_data_done(host, 0);
{
if (host->sdio_irqen) {
if (gpio_get_value(S3C2410_GPE(8)) == 0) {
- printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+ pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
}
local_irq_save(flags);
- //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+ /* pr_debug("%s: transfer %d\n", __func__, transfer); */
host->irq_disabled = transfer;
static void sdhci_dumpregs(struct sdhci_host *host)
{
- printk(KERN_DEBUG DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
+ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
mmc_hostname(host->mmc));
- printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
sdhci_readl(host, SDHCI_DMA_ADDRESS),
sdhci_readw(host, SDHCI_HOST_VERSION));
- printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
sdhci_readw(host, SDHCI_BLOCK_SIZE),
sdhci_readw(host, SDHCI_BLOCK_COUNT));
- printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
sdhci_readl(host, SDHCI_ARGUMENT),
sdhci_readw(host, SDHCI_TRANSFER_MODE));
- printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
sdhci_readl(host, SDHCI_PRESENT_STATE),
sdhci_readb(host, SDHCI_HOST_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
sdhci_readb(host, SDHCI_POWER_CONTROL),
sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
sdhci_readw(host, SDHCI_CLOCK_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
sdhci_readl(host, SDHCI_INT_STATUS));
- printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
sdhci_readl(host, SDHCI_INT_ENABLE),
sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
sdhci_readw(host, SDHCI_ACMD12_ERR),
sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
- printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
sdhci_readl(host, SDHCI_CAPABILITIES),
sdhci_readl(host, SDHCI_CAPABILITIES_1));
- printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
sdhci_readw(host, SDHCI_COMMAND),
sdhci_readl(host, SDHCI_MAX_CURRENT));
- printk(KERN_DEBUG DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA)
- printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
readl(host->ioaddr + SDHCI_ADMA_ERROR),
readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
- printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
+ pr_debug(DRIVER_NAME ": ===========================================\n");
}
/*****************************************************************************\
/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
+ pr_err("%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
return;
}
if (count >= 0xF) {
- printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n",
+ pr_warning("%s: Too large timeout requested for CMD%d!\n",
mmc_hostname(host->mmc), cmd->opcode);
count = 0xE;
}
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Controller never released "
+ pr_err("%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = -EIO;
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- printk(KERN_ERR "%s: Unsupported response type!\n",
+ pr_err("%s: Unsupported response type!\n",
mmc_hostname(host->mmc));
cmd->error = -EINVAL;
tasklet_schedule(&host->finish_tasklet);
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Internal clock never "
+ pr_err("%s: Internal clock never "
"stabilised.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
else {
- printk(KERN_INFO DRIVER_NAME ": Switching to 3.3V "
+ pr_info(DRIVER_NAME ": Switching to 3.3V "
"signalling voltage failed\n");
return -EIO;
}
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- printk(KERN_INFO DRIVER_NAME ": Switching to 1.8V signalling "
+ pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
"voltage failed, retrying with S18R set to 0\n");
return -EAGAIN;
} else
spin_lock(&host->lock);
if (!host->tuning_done) {
- printk(KERN_INFO DRIVER_NAME ": Timeout waiting for "
+ pr_info(DRIVER_NAME ": Timeout waiting for "
"Buffer Read Ready interrupt during tuning "
"procedure, falling back to fixed sampling "
"clock\n");
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
} else {
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- printk(KERN_INFO DRIVER_NAME ": Tuning procedure"
+ pr_info(DRIVER_NAME ": Tuning procedure"
" failed, falling back to fixed sampling"
" clock\n");
err = -EIO;
/* Check host->mrq first in case we are runtime suspended */
if (host->mrq &&
!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
- printk(KERN_ERR "%s: Card removed during transfer!\n",
+ pr_err("%s: Card removed during transfer!\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: Resetting controller.\n",
+ pr_err("%s: Resetting controller.\n",
mmc_hostname(host->mmc));
sdhci_reset(host, SDHCI_RESET_CMD);
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware "
+ pr_err("%s: Timeout waiting for hardware "
"interrupt.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
BUG_ON(intmask == 0);
if (!host->cmd) {
- printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
+ pr_err("%s: Got command interrupt 0x%08x even "
"though no command operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
}
}
- printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
+ pr_err("%s: Got data interrupt 0x%08x even "
"though no data operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
!= MMC_BUS_TEST_R)
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
- printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
+ pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
sdhci_show_adma_error(host);
host->data->error = -EIO;
}
if (host->runtime_suspended) {
spin_unlock(&host->lock);
- printk(KERN_WARNING "%s: got irq while runtime suspended\n",
+ pr_warning("%s: got irq while runtime suspended\n",
mmc_hostname(host->mmc));
return IRQ_HANDLED;
}
intmask &= ~SDHCI_INT_ERROR;
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Card is consuming too much power!\n",
+ pr_err("%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
}
intmask &= ~SDHCI_INT_CARD_INT;
if (intmask) {
- printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
+ pr_err("%s: Unexpected interrupt 0x%08x.\n",
mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- printk(KERN_ERR "%s: Unknown controller version (%d). "
+ pr_err("%s: Unknown controller version (%d). "
"You may experience problems.\n", mmc_hostname(mmc),
host->version);
}
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
- printk(KERN_WARNING "%s: No suitable DMA "
+ pr_warning("%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
host->flags &=
if (!host->adma_desc || !host->align_buffer) {
kfree(host->adma_desc);
kfree(host->align_buffer);
- printk(KERN_WARNING "%s: Unable to allocate ADMA "
+ pr_warning("%s: Unable to allocate ADMA "
"buffers. Falling back to standard DMA.\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- printk(KERN_ERR
- "%s: Hardware doesn't specify base clock "
+ pr_err("%s: Hardware doesn't specify base clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
host->timeout_clk = host->ops->get_timeout_clock(host);
} else if (!(host->quirks &
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- printk(KERN_ERR
- "%s: Hardware doesn't specify timeout clock "
+ pr_err("%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- printk(KERN_ERR "%s: Hardware doesn't report any "
+ pr_err("%s: Hardware doesn't report any "
"support voltages.\n", mmc_hostname(mmc));
return -ENODEV;
}
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
- printk(KERN_WARNING "%s: Invalid maximum block size, "
+ pr_warning("%s: Invalid maximum block size, "
"assuming 512 bytes\n", mmc_hostname(mmc));
mmc->max_blk_size = 0;
}
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
} else {
regulator_enable(host->vmmc);
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
+ pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
- printk(KERN_ERR "%s: Controller removed during "
+ pr_err("%s: Controller removed during "
" transfer!\n", mmc_hostname(host->mmc));
host->mrq->cmd->error = -ENOMEDIUM;
static int __init sdhci_drv_init(void)
{
- printk(KERN_INFO DRIVER_NAME
+ pr_info(DRIVER_NAME
": Secure Digital Host Controller Interface driver\n");
- printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
return 0;
}
}
if (host->req) {
- printk(KERN_ERR "%s : unfinished request detected\n",
+ pr_err("%s : unfinished request detected\n",
dev_name(&sock->dev));
mrq->cmd->error = -ETIMEDOUT;
goto err_out;
r_data->flags & MMC_DATA_WRITE
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE)) {
- printk(KERN_ERR "%s : scatterlist map failed\n",
+ pr_err("%s : scatterlist map failed\n",
dev_name(&sock->dev));
mrq->cmd->error = -ENOMEM;
goto err_out;
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE);
if (host->sg_len < 1) {
- printk(KERN_ERR "%s : scatterlist map failed\n",
+ pr_err("%s : scatterlist map failed\n",
dev_name(&sock->dev));
tifm_unmap_sg(sock, &host->bounce_buf, 1,
r_data->flags & MMC_DATA_WRITE
host->req = NULL;
if (!mrq) {
- printk(KERN_ERR " %s : no request to complete?\n",
+ pr_err(" %s : no request to complete?\n",
dev_name(&sock->dev));
spin_unlock_irqrestore(&sock->lock, flags);
return;
{
struct tifm_sd *host = (struct tifm_sd*)data;
- printk(KERN_ERR
- "%s : card failed to respond for a long period of time "
+ pr_err("%s : card failed to respond for a long period of time "
"(%x, %x)\n",
dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
}
if (rc) {
- printk(KERN_ERR "%s : controller failed to reset\n",
+ pr_err("%s : controller failed to reset\n",
dev_name(&sock->dev));
return -ENODEV;
}
}
if (rc) {
- printk(KERN_ERR
- "%s : card not ready - probe failed on initialization\n",
+ pr_err("%s : card not ready - probe failed on initialization\n",
dev_name(&sock->dev));
return -ENODEV;
}
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
- printk(KERN_WARNING "%s : card gone, unexpectedly\n",
+ pr_warning("%s : card gone, unexpectedly\n",
dev_name(&sock->dev));
return rc;
}
static void pr_debug_status(u32 status)
{
int i = 0;
- printk(KERN_DEBUG "status: %08x = ", status);
+ pr_debug("status: %08x = ", status);
STATUS_TO_TEXT(CARD_REMOVE, status, i);
STATUS_TO_TEXT(CARD_INSERT, status, i);
STATUS_TO_TEXT(SIGSTATE, status, i);
mmiowb();
if (sdhost->mrq) {
- printk(KERN_ERR "%s: Controller removed during "
+ pr_err("%s: Controller removed during "
"transfer\n", mmc_hostname(sdhost->mmc));
/* make sure all DMA is stopped */
{
u8 setup;
- printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc));
+ pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc));
/*
* Soft reset of chip (SD/MMC part).
* Any leftover data?
*/
if (count) {
- printk(KERN_ERR "%s: Incomplete DMA transfer. "
+ pr_err("%s: Incomplete DMA transfer. "
"%d bytes left.\n",
mmc_hostname(host->mmc), count);
default:
#ifdef CONFIG_MMC_DEBUG
- printk(KERN_WARNING "%s: Data command %d is not "
+ pr_warning("%s: Data command %d is not "
"supported by this controller.\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
host->flags &= ~WBSD_FCARD_PRESENT;
if (host->mrq) {
- printk(KERN_ERR "%s: Card removed during transfer!\n",
+ pr_err("%s: Card removed during transfer!\n",
mmc_hostname(host->mmc));
wbsd_reset(host);
free_dma(dma);
err:
- printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. "
+ pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
"Falling back on FIFO.\n", dma);
}
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": Unable to confirm device presence. You may "
"experience lock-ups.\n");
} else {
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
mmc_add_host(mmc);
- printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc));
+ pr_info("%s: W83L51xD", mmc_hostname(mmc));
if (host->chip_id != 0)
printk(" id %x", (int)host->chip_id);
printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
{
int result;
- printk(KERN_INFO DRIVER_NAME
+ pr_info(DRIVER_NAME
": Winbond W83L51xD SD/MMC card interface driver\n");
- printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
#ifdef CONFIG_PNP