+++ /dev/null
-#
-# Makefile for 68360 machines.
-#
-model-y := ram
-model-$(CONFIG_ROMKERNEL) := rom
-
-obj-y := config.o commproc.o entry.o ints.o
-
-extra-y := head.o
-
-$(obj)/head.o: $(obj)/head-$(model-y).o
- ln -sf head-$(model-y).o $(obj)/head.o
+++ /dev/null
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- *
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent. On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose. Current, the first 512 bytes and the last 256 bytes of
- * memory are used. Right now I am conservative and only use the
- * memory that can never be used for microcode. If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- *
- */
-
-/*
- * Michael Leslie <mleslie@lineo.com>
- * adapted Dan Malek's ppc8xx drivers to M68360
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
-/* #include <asm/page.h> */
-/* #include <asm/pgtable.h> */
-extern void *_quicc_base;
-extern unsigned int system_clock;
-
-
-static uint dp_alloc_base; /* Starting offset in DP ram */
-static uint dp_alloc_top; /* Max offset + 1 */
-
-#if 0
-static void *host_buffer; /* One page of host buffer */
-static void *host_end; /* end + 1 */
-#endif
-
-/* struct cpm360_t *cpmp; */ /* Pointer to comm processor space */
-
-QUICC *pquicc;
-/* QUICC *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */
-
-
-/* CPM interrupt vector functions. */
-struct cpm_action {
- irq_handler_t handler;
- void *dev_id;
-};
-static struct cpm_action cpm_vecs[CPMVEC_NR];
-static void cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
-static void cpm_error_interrupt(void *);
-
-/* prototypes: */
-void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
-void m360_cpm_reset(void);
-
-
-
-
-void __init m360_cpm_reset()
-{
-/* pte_t *pte; */
-
- pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */
-
- /* Perform a CPM reset. */
- pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG);
-
- /* Wait for CPM to become ready (should be 2 clocks). */
- while (pquicc->cp_cr & CMD_FLAG);
-
- /* On the recommendation of the 68360 manual, p. 7-60
- * - Set sdma interrupt service mask to 7
- * - Set sdma arbitration ID to 4
- */
- pquicc->sdma_sdcr = 0x0740;
-
-
- /* Claim the DP memory for our use.
- */
- dp_alloc_base = CPM_DATAONLY_BASE;
- dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE;
-
-
- /* Set the host page for allocation.
- */
- /* host_buffer = host_page_addr; */
- /* host_end = host_page_addr + PAGE_SIZE; */
-
- /* pte = find_pte(&init_mm, host_page_addr); */
- /* pte_val(*pte) |= _PAGE_NO_CACHE; */
- /* flush_tlb_page(current->mm->mmap, host_buffer); */
-
- /* Tell everyone where the comm processor resides.
- */
-/* cpmp = (cpm360_t *)commproc; */
-}
-
-
-/* This is called during init_IRQ. We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-void
-cpm_interrupt_init(void)
-{
- /* Initialize the CPM interrupt controller.
- * NOTE THAT pquicc had better have been initialized!
- * reference: MC68360UM p. 7-377
- */
- pquicc->intr_cicr =
- (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
- (CPM_INTERRUPT << 13) |
- CICR_HP_MASK |
- (CPM_VECTOR_BASE << 5) |
- CICR_SPS;
-
- /* mask all CPM interrupts from reaching the cpu32 core: */
- pquicc->intr_cimr = 0;
-
-
- /* mles - If I understand correctly, the 360 just pops over to the CPM
- * specific vector, obviating the necessity to vector through the IRQ
- * whose priority the CPM is set to. This needs a closer look, though.
- */
-
- /* Set our interrupt handler with the core CPU. */
-/* if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */
-/* panic("Could not allocate CPM IRQ!"); */
-
- /* Install our own error handler.
- */
- /* I think we want to hold off on this one for the moment - mles */
- /* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */
-
- /* master CPM interrupt enable */
- /* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */
-}
-
-
-
-/* CPM interrupt controller interrupt.
-*/
-static void
-cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
-{
- /* uint vec; */
-
- /* mles: Note that this stuff is currently being performed by
- * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c */
-
- /* figure out the vector */
- /* call that vector's handler */
- /* clear the irq's bit in the service register */
-
-#if 0 /* old 860 stuff: */
- /* Get the vector by setting the ACK bit and then reading
- * the register.
- */
- ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
- vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
- vec >>= 11;
-
-
- if (cpm_vecs[vec].handler != 0)
- (*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id);
- else
- ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec);
-
- /* After servicing the interrupt, we have to remove the status
- * indicator.
- */
- ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
-#endif
-
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts. All we have to do is ACK it
- * and return. This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static void
-cpm_error_interrupt(void *dev)
-{
-}
-
-/* Install a CPM interrupt handler.
-*/
-void
-cpm_install_handler(int vec, irq_handler_t handler, void *dev_id)
-{
-
- request_irq(vec, handler, 0, "timer", dev_id);
-
-/* if (cpm_vecs[vec].handler != 0) */
-/* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
-/* (uint)handler, (uint)cpm_vecs[vec].handler); */
-/* cpm_vecs[vec].handler = handler; */
-/* cpm_vecs[vec].dev_id = dev_id; */
-
- /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */
-/* pquicc->intr_cimr |= (1 << vec); */
-
-}
-
-/* Free a CPM interrupt handler.
-*/
-void
-cpm_free_handler(int vec)
-{
- cpm_vecs[vec].handler = NULL;
- cpm_vecs[vec].dev_id = NULL;
- /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */
- pquicc->intr_cimr &= ~(1 << vec);
-}
-
-
-
-
-/* Allocate some memory from the dual ported ram. We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint
-m360_cpm_dpalloc(uint size)
-{
- uint retloc;
-
- if ((dp_alloc_base + size) >= dp_alloc_top)
- return(CPM_DP_NOSPACE);
-
- retloc = dp_alloc_base;
- dp_alloc_base += size;
-
- return(retloc);
-}
-
-
-#if 0 /* mleslie - for now these are simply kmalloc'd */
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m360_cpm_hostalloc(uint size)
-{
- uint retloc;
-
- if ((host_buffer + size) >= host_end)
- return(0);
-
- retloc = host_buffer;
- host_buffer += size;
-
- return(retloc);
-}
-#endif
-
-
-/* Set a baud rate generator. This needs lots of work. There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-/* #define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq * 1000000) */
-#define BRG_INT_CLK system_clock
-#define BRG_UART_CLK (BRG_INT_CLK/16)
-
-void
-m360_cpm_setbrg(uint brg, uint rate)
-{
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- /* bp = (uint *)&cpmp->cp_brgc1; */
- bp = (volatile uint *)(&pquicc->brgc[0].l);
- bp += brg;
- *bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN;
-}
-
-
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
+++ /dev/null
-/*
- * config.c - non-mmu 68360 platform initialization code
- *
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- * Copyright (C) 1993 Hamish Macdonald
- * Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <stdarg.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-#ifdef CONFIG_UCQUICC
-#include <asm/bootstd.h>
-#endif
-
-extern void m360_cpm_reset(void);
-
-// Mask to select if the PLL prescaler is enabled.
-#define MCU_PREEN ((unsigned short)(0x0001 << 13))
-
-#if defined(CONFIG_UCQUICC)
-#define OSCILLATOR (unsigned long int)33000000
-#endif
-
-static irq_handler_t timer_interrupt;
-unsigned long int system_clock;
-
-extern QUICC *pquicc;
-
-/* TODO DON"T Hard Code this */
-/* calculate properly using the right PLL and prescaller */
-// unsigned int system_clock = 33000000l;
-extern unsigned long int system_clock; //In kernel setup.c
-
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
- /* Reset Timer1 */
- /* TSTAT &= 0; */
-
- pquicc->timer_ter1 = 0x0002; /* clear timer event */
-
- return timer_interrupt(irq, dummy);
-}
-
-static struct irqaction m68360_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER,
- .handler = hw_tick,
-};
-
-void hw_timer_init(irq_handler_t handler)
-{
- unsigned char prescaler;
- unsigned short tgcr_save;
-
-#if 0
- /* Restart mode, Enable int, 32KHz, Enable timer */
- TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
- /* Set prescaler (Divide 32KHz by 32)*/
- TPRER = 31;
- /* Set compare register 32Khz / 32 / 10 = 100 */
- TCMP = 10;
-
- request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
-#endif
-
- /* General purpose quicc timers: MC68360UM p7-20 */
-
- /* Set up timer 1 (in [1..4]) to do 100Hz */
- tgcr_save = pquicc->timer_tgcr & 0xfff0;
- pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */
- /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
-
- prescaler = 8;
- pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
- (unsigned short)((prescaler - 1) << 8);
-
- pquicc->timer_tcn1 = 0x0000; /* initial count */
- /* calculate interval for 100Hz based on the _system_clock: */
- pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
-
- pquicc->timer_ter1 = 0x0003; /* clear timer events */
-
- timer_interrupt = handler;
-
- /* enable timer 1 interrupt in CIMR */
- setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
-
- /* Start timer 1: */
- tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
- pquicc->timer_tgcr = tgcr_save;
-}
-
-void BSP_reset (void)
-{
- local_irq_disable();
- asm volatile (
- "moveal #_start, %a0;\n"
- "moveb #0, 0xFFFFF300;\n"
- "moveal 0(%a0), %sp;\n"
- "moveal 4(%a0), %a0;\n"
- "jmp (%a0);\n"
- );
-}
-
-unsigned char *scc1_hwaddr;
-static int errno;
-
-#if defined (CONFIG_UCQUICC)
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-#endif
-
-
-void __init config_BSP(char *command, int len)
-{
- unsigned char *p;
-
- m360_cpm_reset();
-
- /* Calculate the real system clock value. */
- {
- unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
- if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
- {
- int mf = (int)(pquicc->sim_pllcr & 0x0fff);
- system_clock = (OSCILLATOR / 128) * (mf + 1);
- }
- else
- {
- int mf = (int)(pquicc->sim_pllcr & 0x0fff);
- system_clock = (OSCILLATOR) * (mf + 1);
- }
- }
-
- printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
-
-#if defined(CONFIG_UCQUICC) && 0
- printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
- p = scc1_hwaddr = gethwaddr(0);
- printk(KERN_INFO "uCquicc hwaddr %pM\n", p);
-
- p = getbenv("APPEND");
- if (p)
- strcpy(p,command);
- else
- command[0] = 0;
-#else
- scc1_hwaddr = "\00\01\02\03\04\05";
-#endif
-
- mach_reset = BSP_reset;
-}
+++ /dev/null
-/*
- * entry.S - non-mmu 68360 interrupt and exceptions entry points
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2001 SED Systems, a Division of Calian Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- * M68360 Port by SED Systems, and Lineo.
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-
-.text
-
-.globl system_call
-.globl resume
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_call_table
-.globl bad_interrupt
-.globl inthandler
-
-badsys:
- movel #-ENOSYS,%sp@(PT_OFF_D0)
- jra ret_from_exception
-
-do_trace:
- movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
- subql #4,%sp
- SAVE_SWITCH_STACK
- jbsr syscall_trace_enter
- RESTORE_SWITCH_STACK
- addql #4,%sp
- movel %sp@(PT_OFF_ORIG_D0),%d1
- movel #-ENOSYS,%d0
- cmpl #NR_syscalls,%d1
- jcc 1f
- lsl #2,%d1
- lea sys_call_table, %a0
- jbsr %a0@(%d1)
-
-1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
- subql #4,%sp /* dummy return address */
- SAVE_SWITCH_STACK
- jbsr syscall_trace_leave
-
-ret_from_signal:
- RESTORE_SWITCH_STACK
- addql #4,%sp
- jra ret_from_exception
-
-ENTRY(system_call)
- SAVE_ALL_SYS
-
- /* save top of frame*/
- pea %sp@
- jbsr set_esp0
- addql #4,%sp
-
- movel %sp@(PT_OFF_ORIG_D0),%d0
-
- movel %sp,%d1 /* get thread_info pointer */
- andl #-THREAD_SIZE,%d1
- movel %d1,%a2
- btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
- jne do_trace
- cmpl #NR_syscalls,%d0
- jcc badsys
- lsl #2,%d0
- lea sys_call_table,%a0
- movel %a0@(%d0), %a0
- jbsr %a0@
- movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
-
-ret_from_exception:
- btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
- jeq Luser_return /* if so, skip resched, signals*/
-
-Lkernel_return:
- RESTORE_ALL
-
-Luser_return:
- /* only allow interrupts when we are really the last one on the*/
- /* kernel stack, otherwise stack overflow can occur during*/
- /* heavy interrupt load*/
- andw #ALLOWINT,%sr
-
- movel %sp,%d1 /* get thread_info pointer */
- andl #-THREAD_SIZE,%d1
- movel %d1,%a2
-1:
- move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */
- jne Lwork_to_do
- RESTORE_ALL
-
-Lwork_to_do:
- movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */
- btst #TIF_NEED_RESCHED,%d1
- jne reschedule
-
-Lsignal_return:
- subql #4,%sp /* dummy return address*/
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- bsrw do_notify_resume
- addql #4,%sp
- RESTORE_SWITCH_STACK
- addql #4,%sp
- jra 1b
-
-/*
- * This is the main interrupt handler, responsible for calling do_IRQ()
- */
-inthandler:
- SAVE_ALL_INT
- movew %sp@(PT_OFF_FORMATVEC), %d0
- and.l #0x3ff, %d0
- lsr.l #0x02, %d0
-
- movel %sp,%sp@-
- movel %d0,%sp@- /* put vector # on stack*/
- jbsr do_IRQ /* process the IRQ */
- addql #8,%sp /* pop parameters off stack*/
- jra ret_from_exception
-
-/*
- * Handler for uninitialized and spurious interrupts.
- */
-bad_interrupt:
- addql #1,irq_err_count
- rte
-
-/*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1, so don't change these
- * registers until their contents are no longer needed.
- */
-ENTRY(resume)
- movel %a0,%d1 /* save prev thread in d1 */
- movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */
- SAVE_SWITCH_STACK
- movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
- movel %usp,%a3 /* save usp */
- movel %a3,%a0@(TASK_THREAD+THREAD_USP)
-
- movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
- movel %a3,%usp
- movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
- RESTORE_SWITCH_STACK
- movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */
- rts
-
+++ /dev/null
-/*
- * head-ram.S - startup code for Motorola 68360
- *
- * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- * uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-#define ASSEMBLY
-
-.global _stext
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-#define ROMEND (CONFIG_ROMBASE + CONFIG_ROMSIZE)
-
-#define REGB 0x1000
-#define PEPAR (_dprbase + REGB + 0x0016)
-#define GMR (_dprbase + REGB + 0x0040)
-#define OR0 (_dprbase + REGB + 0x0054)
-#define BR0 (_dprbase + REGB + 0x0050)
-#define OR1 (_dprbase + REGB + 0x0064)
-#define BR1 (_dprbase + REGB + 0x0060)
-#define OR4 (_dprbase + REGB + 0x0094)
-#define BR4 (_dprbase + REGB + 0x0090)
-#define OR6 (_dprbase + REGB + 0x00b4)
-#define BR6 (_dprbase + REGB + 0x00b0)
-#define OR7 (_dprbase + REGB + 0x00c4)
-#define BR7 (_dprbase + REGB + 0x00c0)
-
-#define MCR (_dprbase + REGB + 0x0000)
-#define AVR (_dprbase + REGB + 0x0008)
-
-#define SYPCR (_dprbase + REGB + 0x0022)
-
-#define PLLCR (_dprbase + REGB + 0x0010)
-#define CLKOCR (_dprbase + REGB + 0x000C)
-#define CDVCR (_dprbase + REGB + 0x0014)
-
-#define BKAR (_dprbase + REGB + 0x0030)
-#define BKCR (_dprbase + REGB + 0x0034)
-#define SWIV (_dprbase + REGB + 0x0023)
-#define PICR (_dprbase + REGB + 0x0026)
-#define PITR (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR 0x00000000
-#define SIM_OR_MASK 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK 0x20000002
-#define SIM_BR0_MASK 0x00000001
-
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK 0x10000000
-#define SIM_BR1_MASK 0x00000001
-
-#define MCU_SIM_MBAR_ADRS 0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK 0xfffff000
-#define MCU_SIM_MBAR_AS_MASK 0x00000001
-
-#define MCU_SIM_PEPAR 0x00B4
-
-#define MCU_DISABLE_INTRPTS 0x2700
-#define MCU_SIM_AVR 0x00
-
-#define MCU_SIM_MCR 0x00005cff
-
-#define MCU_SIM_CLKOCR 0x00
-#define MCU_SIM_PLLCR 0x8000
-#define MCU_SIM_CDVCR 0x0000
-
-#define MCU_SIM_SYPCR 0x0000
-#define MCU_SIM_SWIV 0x00
-#define MCU_SIM_PICR 0x0000
-#define MCU_SIM_PITR 0x0000
-
-
-#include <asm/m68360_regs.h>
-
-
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
- .text
-_start:
-_stext:
- nop
- ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
- /* We should not need to setup the boot stack the reset should do it. */
- movea.l #RAMEND, %sp /*set up stack at the end of DRAM:*/
-
-set_mbar_register:
- moveq.l #0x07, %d1 /* Setup MBAR */
- movec %d1, %dfc
-
- lea.l MCU_SIM_MBAR_ADRS, %a0
- move.l #_dprbase, %d0
- andi.l #MCU_SIM_MBAR_BA_MASK, %d0
- ori.l #MCU_SIM_MBAR_AS_MASK, %d0
- moves.l %d0, %a0@
-
- moveq.l #0x05, %d1
- movec.l %d1, %dfc
-
- /* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
- /* Set Module Configuration Register */
- move.l #MCU_SIM_MCR, MCR
-
- /* to do: Determine cause of reset */
-
- /*
- * configure system clock MC68360 p. 6-40
- * (value +1)*osc/128 = system clock
- */
-set_sim_clock:
- move.w #MCU_SIM_PLLCR, PLLCR
- move.b #MCU_SIM_CLKOCR, CLKOCR
- move.w #MCU_SIM_CDVCR, CDVCR
-
- /* Wait for the PLL to settle */
- move.w #16384, %d0
-pll_settle_wait:
- subi.w #1, %d0
- bne pll_settle_wait
-
- /* Setup the system protection register, and watchdog timer register */
- move.b #MCU_SIM_SWIV, SWIV
- move.w #MCU_SIM_PICR, PICR
- move.w #MCU_SIM_PITR, PITR
- move.w #MCU_SIM_SYPCR, SYPCR
-
- /* Clear DPRAM - system + parameter */
- movea.l #_dprbase, %a0
- movea.l #_dprbase+0x2000, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi clear_dpram
-
-configure_memory_controller:
- /* Set up Global Memory Register (GMR) */
- move.l #MCU_SIM_GMR, %d0
- move.l %d0, GMR
-
-configure_chip_select_0:
- move.l #RAMEND, %d0
- subi.l #__ramstart, %d0
- subq.l #0x01, %d0
- eori.l #SIM_OR_MASK, %d0
- ori.l #SIM_OR0_MASK, %d0
- move.l %d0, OR0
-
- move.l #__ramstart, %d0
- ori.l #SIM_BR0_MASK, %d0
- move.l %d0, BR0
-
-configure_chip_select_1:
- move.l #ROMEND, %d0
- subi.l #__rom_start, %d0
- subq.l #0x01, %d0
- eori.l #SIM_OR_MASK, %d0
- ori.l #SIM_OR1_MASK, %d0
- move.l %d0, OR1
-
- move.l #__rom_start, %d0
- ori.l #SIM_BR1_MASK, %d0
- move.l %d0, BR1
-
- move.w #MCU_SIM_PEPAR, PEPAR
-
- /* point to vector table: */
- move.l #_romvec, %a0
- move.l #_ramvec, %a1
-copy_vectors:
- move.l %a0@, %d0
- move.l %d0, %a1@
- move.l %a0@, %a1@
- addq.l #0x04, %a0
- addq.l #0x04, %a1
- cmp.l #_start, %a0
- blt copy_vectors
-
- move.l #_ramvec, %a1
- movec %a1, %vbr
-
-
- /* Copy data segment from ROM to RAM */
- moveal #_stext, %a0
- moveal #_sdata, %a1
- moveal #_edata, %a2
-
- /* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
- move.l %a0@, %d0
- addq.l #0x04, %a0
- move.l %d0, %a1@
- addq.l #0x04, %a1
- cmp.l #_edata, %a1
- blt LD1
-
- moveal #__bss_start, %a0
- moveal #__bss_stop, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-L1:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi L1
-
-load_quicc:
- move.l #_dprbase, _quicc_base
-
-store_ram_size:
- /* Set ram size information */
- move.l #_sdata, _rambase
- move.l #__bss_stop, _ramstart
- move.l #RAMEND, %d0
- sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
- move.l %d0, _ramend /* Different from RAMEND.*/
-
- pea 0
- pea env
- pea %sp@(4)
- pea 0
-
- lea init_thread_union, %a2
- lea 0x2000(%a2), %sp
-
-lp:
- jsr start_kernel
-
-_exit:
- jmp _exit
-
-
- .data
- .align 4
-env:
- .long 0
-_quicc_base:
- .long 0
-_periph_base:
- .long 0
-_ramvec:
- .long 0
-_rambase:
- .long 0
-_ramstart:
- .long 0
-_ramend:
- .long 0
-_dprbase:
- .long 0xffffe000
-
- .text
-
- /*
- * These are the exception vectors at boot up, they are copied into RAM
- * and then overwritten as needed.
- */
-
-.section ".data..initvect","awx"
- .long RAMEND /* Reset: Initial Stack Pointer - 0. */
- .long _start /* Reset: Initial Program Counter - 1. */
- .long buserr /* Bus Error - 2. */
- .long trap /* Address Error - 3. */
- .long trap /* Illegal Instruction - 4. */
- .long trap /* Divide by zero - 5. */
- .long trap /* CHK, CHK2 Instructions - 6. */
- .long trap /* TRAPcc, TRAPV Instructions - 7. */
- .long trap /* Privilege Violation - 8. */
- .long trap /* Trace - 9. */
- .long trap /* Line 1010 Emulator - 10. */
- .long trap /* Line 1111 Emualtor - 11. */
- .long trap /* Harware Breakpoint - 12. */
- .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
- .long trap /* Format Error - 14. */
- .long trap /* Uninitialized Interrupt - 15. */
- .long trap /* (Unassigned, Reserver) - 16. */
- .long trap /* (Unassigned, Reserver) - 17. */
- .long trap /* (Unassigned, Reserver) - 18. */
- .long trap /* (Unassigned, Reserver) - 19. */
- .long trap /* (Unassigned, Reserver) - 20. */
- .long trap /* (Unassigned, Reserver) - 21. */
- .long trap /* (Unassigned, Reserver) - 22. */
- .long trap /* (Unassigned, Reserver) - 23. */
- .long trap /* Spurious Interrupt - 24. */
- .long trap /* Level 1 Interrupt Autovector - 25. */
- .long trap /* Level 2 Interrupt Autovector - 26. */
- .long trap /* Level 3 Interrupt Autovector - 27. */
- .long trap /* Level 4 Interrupt Autovector - 28. */
- .long trap /* Level 5 Interrupt Autovector - 29. */
- .long trap /* Level 6 Interrupt Autovector - 30. */
- .long trap /* Level 7 Interrupt Autovector - 31. */
- .long system_call /* Trap Instruction Vectors 0 - 32. */
- .long trap /* Trap Instruction Vectors 1 - 33. */
- .long trap /* Trap Instruction Vectors 2 - 34. */
- .long trap /* Trap Instruction Vectors 3 - 35. */
- .long trap /* Trap Instruction Vectors 4 - 36. */
- .long trap /* Trap Instruction Vectors 5 - 37. */
- .long trap /* Trap Instruction Vectors 6 - 38. */
- .long trap /* Trap Instruction Vectors 7 - 39. */
- .long trap /* Trap Instruction Vectors 8 - 40. */
- .long trap /* Trap Instruction Vectors 9 - 41. */
- .long trap /* Trap Instruction Vectors 10 - 42. */
- .long trap /* Trap Instruction Vectors 11 - 43. */
- .long trap /* Trap Instruction Vectors 12 - 44. */
- .long trap /* Trap Instruction Vectors 13 - 45. */
- .long trap /* Trap Instruction Vectors 14 - 46. */
- .long trap /* Trap Instruction Vectors 15 - 47. */
- .long 0 /* (Reserved for Coprocessor) - 48. */
- .long 0 /* (Reserved for Coprocessor) - 49. */
- .long 0 /* (Reserved for Coprocessor) - 50. */
- .long 0 /* (Reserved for Coprocessor) - 51. */
- .long 0 /* (Reserved for Coprocessor) - 52. */
- .long 0 /* (Reserved for Coprocessor) - 53. */
- .long 0 /* (Reserved for Coprocessor) - 54. */
- .long 0 /* (Reserved for Coprocessor) - 55. */
- .long 0 /* (Reserved for Coprocessor) - 56. */
- .long 0 /* (Reserved for Coprocessor) - 57. */
- .long 0 /* (Reserved for Coprocessor) - 58. */
- .long 0 /* (Unassigned, Reserved) - 59. */
- .long 0 /* (Unassigned, Reserved) - 60. */
- .long 0 /* (Unassigned, Reserved) - 61. */
- .long 0 /* (Unassigned, Reserved) - 62. */
- .long 0 /* (Unassigned, Reserved) - 63. */
- /* The assignment of these vectors to the CPM is */
- /* dependent on the configuration of the CPM vba */
- /* fields. */
- .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
- .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
- .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
- .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
- .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
- .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
- .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
- .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
- .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
- .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
- .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
- .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
- .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
- .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
- .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
- .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
- .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
- .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
- .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
- .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
- .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
- .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
- .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
- .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
- .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
- .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
- .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
- .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
- .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
- .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
- .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
- .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
- /* I don't think anything uses the vectors after here. */
- .long 0 /* (User-Defined Vectors 34) - 96. */
- .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
- .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
+++ /dev/null
-/*
- * head-rom.S - startup code for Motorola 68360
- *
- * Copyright (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- * uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-
-.global _stext
-.global __bss_start
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-#define REGB 0x1000
-#define PEPAR (_dprbase + REGB + 0x0016)
-#define GMR (_dprbase + REGB + 0x0040)
-#define OR0 (_dprbase + REGB + 0x0054)
-#define BR0 (_dprbase + REGB + 0x0050)
-
-#define OR1 (_dprbase + REGB + 0x0064)
-#define BR1 (_dprbase + REGB + 0x0060)
-
-#define OR2 (_dprbase + REGB + 0x0074)
-#define BR2 (_dprbase + REGB + 0x0070)
-
-#define OR3 (_dprbase + REGB + 0x0084)
-#define BR3 (_dprbase + REGB + 0x0080)
-
-#define OR4 (_dprbase + REGB + 0x0094)
-#define BR4 (_dprbase + REGB + 0x0090)
-
-#define OR5 (_dprbase + REGB + 0x00A4)
-#define BR5 (_dprbase + REGB + 0x00A0)
-
-#define OR6 (_dprbase + REGB + 0x00b4)
-#define BR6 (_dprbase + REGB + 0x00b0)
-
-#define OR7 (_dprbase + REGB + 0x00c4)
-#define BR7 (_dprbase + REGB + 0x00c0)
-
-#define MCR (_dprbase + REGB + 0x0000)
-#define AVR (_dprbase + REGB + 0x0008)
-
-#define SYPCR (_dprbase + REGB + 0x0022)
-
-#define PLLCR (_dprbase + REGB + 0x0010)
-#define CLKOCR (_dprbase + REGB + 0x000C)
-#define CDVCR (_dprbase + REGB + 0x0014)
-
-#define BKAR (_dprbase + REGB + 0x0030)
-#define BKCR (_dprbase + REGB + 0x0034)
-#define SWIV (_dprbase + REGB + 0x0023)
-#define PICR (_dprbase + REGB + 0x0026)
-#define PITR (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR 0x00000000
-#define SIM_OR_MASK 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK 0x20000000
-#define SIM_BR0_MASK 0x00000001
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK 0x10000000
-#define SIM_BR1_MASK 0x00000001
-
-#define MCU_SIM_MBAR_ADRS 0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK 0xfffff000
-#define MCU_SIM_MBAR_AS_MASK 0x00000001
-
-#define MCU_SIM_PEPAR 0x00B4
-
-#define MCU_DISABLE_INTRPTS 0x2700
-#define MCU_SIM_AVR 0x00
-
-#define MCU_SIM_MCR 0x00005cff
-
-#define MCU_SIM_CLKOCR 0x00
-#define MCU_SIM_PLLCR 0x8000
-#define MCU_SIM_CDVCR 0x0000
-
-#define MCU_SIM_SYPCR 0x0000
-#define MCU_SIM_SWIV 0x00
-#define MCU_SIM_PICR 0x0000
-#define MCU_SIM_PITR 0x0000
-
-
-#include <asm/m68360_regs.h>
-
-
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
- .text
-_start:
-_stext:
- nop
- ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
- /* We should not need to setup the boot stack the reset should do it. */
- movea.l #RAMEND, %sp /* set up stack at the end of DRAM:*/
-
-
-set_mbar_register:
- moveq.l #0x07, %d1 /* Setup MBAR */
- movec %d1, %dfc
-
- lea.l MCU_SIM_MBAR_ADRS, %a0
- move.l #_dprbase, %d0
- andi.l #MCU_SIM_MBAR_BA_MASK, %d0
- ori.l #MCU_SIM_MBAR_AS_MASK, %d0
- moves.l %d0, %a0@
-
- moveq.l #0x05, %d1
- movec.l %d1, %dfc
-
- /* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
- /* Set Module Configuration Register */
- move.l #MCU_SIM_MCR, MCR
-
- /* to do: Determine cause of reset */
-
- /*
- * configure system clock MC68360 p. 6-40
- * (value +1)*osc/128 = system clock
- * or
- * (value + 1)*osc = system clock
- * You do not need to divide the oscillator by 128 unless you want to.
- */
-set_sim_clock:
- move.w #MCU_SIM_PLLCR, PLLCR
- move.b #MCU_SIM_CLKOCR, CLKOCR
- move.w #MCU_SIM_CDVCR, CDVCR
-
- /* Wait for the PLL to settle */
- move.w #16384, %d0
-pll_settle_wait:
- subi.w #1, %d0
- bne pll_settle_wait
-
- /* Setup the system protection register, and watchdog timer register */
- move.b #MCU_SIM_SWIV, SWIV
- move.w #MCU_SIM_PICR, PICR
- move.w #MCU_SIM_PITR, PITR
- move.w #MCU_SIM_SYPCR, SYPCR
-
- /* Clear DPRAM - system + parameter */
- movea.l #_dprbase, %a0
- movea.l #_dprbase+0x2000, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi clear_dpram
-
-configure_memory_controller:
- /* Set up Global Memory Register (GMR) */
- move.l #MCU_SIM_GMR, %d0
- move.l %d0, GMR
-
-configure_chip_select_0:
- move.l #0x00400000, %d0
- subq.l #0x01, %d0
- eori.l #SIM_OR_MASK, %d0
- ori.l #SIM_OR0_MASK, %d0
- move.l %d0, OR0
-
- move.l #__rom_start, %d0
- ori.l #SIM_BR0_MASK, %d0
- move.l %d0, BR0
-
- move.l #0x0, BR1
- move.l #0x0, BR2
- move.l #0x0, BR3
- move.l #0x0, BR4
- move.l #0x0, BR5
- move.l #0x0, BR6
- move.l #0x0, BR7
-
- move.w #MCU_SIM_PEPAR, PEPAR
-
- /* point to vector table: */
- move.l #_romvec, %a0
- move.l #_ramvec, %a1
-copy_vectors:
- move.l %a0@, %d0
- move.l %d0, %a1@
- move.l %a0@, %a1@
- addq.l #0x04, %a0
- addq.l #0x04, %a1
- cmp.l #_start, %a0
- blt copy_vectors
-
- move.l #_ramvec, %a1
- movec %a1, %vbr
-
-
- /* Copy data segment from ROM to RAM */
- moveal #_etext, %a0
- moveal #_sdata, %a1
- moveal #_edata, %a2
-
- /* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
- move.l %a0@, %d0
- addq.l #0x04, %a0
- move.l %d0, %a1@
- addq.l #0x04, %a1
- cmp.l #_edata, %a1
- blt LD1
-
- moveal #__bss_start, %a0
- moveal #__bss_stop, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-L1:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi L1
-
-load_quicc:
- move.l #_dprbase, _quicc_base
-
-store_ram_size:
- /* Set ram size information */
- move.l #_sdata, _rambase
- move.l #__bss_stop, _ramstart
- move.l #RAMEND, %d0
- sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
- move.l %d0, _ramend /* Different from RAMEND.*/
-
- pea 0
- pea env
- pea %sp@(4)
- pea 0
-
- lea init_thread_union, %a2
- lea 0x2000(%a2), %sp
-
-lp:
- jsr start_kernel
-
-_exit:
- jmp _exit
-
-
- .data
- .align 4
-env:
- .long 0
-_quicc_base:
- .long 0
-_periph_base:
- .long 0
-_ramvec:
- .long 0
-_rambase:
- .long 0
-_ramstart:
- .long 0
-_ramend:
- .long 0
-_dprbase:
- .long 0xffffe000
-
-
- .text
-
- /*
- * These are the exception vectors at boot up, they are copied into RAM
- * and then overwritten as needed.
- */
-
-.section ".data..initvect","awx"
- .long RAMEND /* Reset: Initial Stack Pointer - 0. */
- .long _start /* Reset: Initial Program Counter - 1. */
- .long buserr /* Bus Error - 2. */
- .long trap /* Address Error - 3. */
- .long trap /* Illegal Instruction - 4. */
- .long trap /* Divide by zero - 5. */
- .long trap /* CHK, CHK2 Instructions - 6. */
- .long trap /* TRAPcc, TRAPV Instructions - 7. */
- .long trap /* Privilege Violation - 8. */
- .long trap /* Trace - 9. */
- .long trap /* Line 1010 Emulator - 10. */
- .long trap /* Line 1111 Emualtor - 11. */
- .long trap /* Harware Breakpoint - 12. */
- .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
- .long trap /* Format Error - 14. */
- .long trap /* Uninitialized Interrupt - 15. */
- .long trap /* (Unassigned, Reserver) - 16. */
- .long trap /* (Unassigned, Reserver) - 17. */
- .long trap /* (Unassigned, Reserver) - 18. */
- .long trap /* (Unassigned, Reserver) - 19. */
- .long trap /* (Unassigned, Reserver) - 20. */
- .long trap /* (Unassigned, Reserver) - 21. */
- .long trap /* (Unassigned, Reserver) - 22. */
- .long trap /* (Unassigned, Reserver) - 23. */
- .long trap /* Spurious Interrupt - 24. */
- .long trap /* Level 1 Interrupt Autovector - 25. */
- .long trap /* Level 2 Interrupt Autovector - 26. */
- .long trap /* Level 3 Interrupt Autovector - 27. */
- .long trap /* Level 4 Interrupt Autovector - 28. */
- .long trap /* Level 5 Interrupt Autovector - 29. */
- .long trap /* Level 6 Interrupt Autovector - 30. */
- .long trap /* Level 7 Interrupt Autovector - 31. */
- .long system_call /* Trap Instruction Vectors 0 - 32. */
- .long trap /* Trap Instruction Vectors 1 - 33. */
- .long trap /* Trap Instruction Vectors 2 - 34. */
- .long trap /* Trap Instruction Vectors 3 - 35. */
- .long trap /* Trap Instruction Vectors 4 - 36. */
- .long trap /* Trap Instruction Vectors 5 - 37. */
- .long trap /* Trap Instruction Vectors 6 - 38. */
- .long trap /* Trap Instruction Vectors 7 - 39. */
- .long trap /* Trap Instruction Vectors 8 - 40. */
- .long trap /* Trap Instruction Vectors 9 - 41. */
- .long trap /* Trap Instruction Vectors 10 - 42. */
- .long trap /* Trap Instruction Vectors 11 - 43. */
- .long trap /* Trap Instruction Vectors 12 - 44. */
- .long trap /* Trap Instruction Vectors 13 - 45. */
- .long trap /* Trap Instruction Vectors 14 - 46. */
- .long trap /* Trap Instruction Vectors 15 - 47. */
- .long 0 /* (Reserved for Coprocessor) - 48. */
- .long 0 /* (Reserved for Coprocessor) - 49. */
- .long 0 /* (Reserved for Coprocessor) - 50. */
- .long 0 /* (Reserved for Coprocessor) - 51. */
- .long 0 /* (Reserved for Coprocessor) - 52. */
- .long 0 /* (Reserved for Coprocessor) - 53. */
- .long 0 /* (Reserved for Coprocessor) - 54. */
- .long 0 /* (Reserved for Coprocessor) - 55. */
- .long 0 /* (Reserved for Coprocessor) - 56. */
- .long 0 /* (Reserved for Coprocessor) - 57. */
- .long 0 /* (Reserved for Coprocessor) - 58. */
- .long 0 /* (Unassigned, Reserved) - 59. */
- .long 0 /* (Unassigned, Reserved) - 60. */
- .long 0 /* (Unassigned, Reserved) - 61. */
- .long 0 /* (Unassigned, Reserved) - 62. */
- .long 0 /* (Unassigned, Reserved) - 63. */
- /* The assignment of these vectors to the CPM is */
- /* dependent on the configuration of the CPM vba */
- /* fields. */
- .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
- .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
- .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
- .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
- .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
- .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
- .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
- .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
- .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
- .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
- .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
- .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
- .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
- .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
- .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
- .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
- .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
- .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
- .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
- .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
- .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
- .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
- .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
- .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
- .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
- .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
- .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
- .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
- .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
- .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
- .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
- .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
- /* I don't think anything uses the vectors after here. */
- .long 0 /* (User-Defined Vectors 34) - 96. */
- .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
- .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
+++ /dev/null
-/*
- * ints.c - first level interrupt handlers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1996 Roman Zippel
- * Copyright (c) 1999 D. Jeff Dionne <jeff@uclinux.org>
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-/* from quicc/commproc.c: */
-extern QUICC *pquicc;
-extern void cpm_interrupt_init(void);
-
-#define INTERNAL_IRQS (96)
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void bad_interrupt(void);
-asmlinkage void inthandler(void);
-
-static void intc_irq_unmask(struct irq_data *d)
-{
- pquicc->intr_cimr |= (1 << d->irq);
-}
-
-static void intc_irq_mask(struct irq_data *d)
-{
- pquicc->intr_cimr &= ~(1 << d->irq);
-}
-
-static void intc_irq_ack(struct irq_data *d)
-{
- pquicc->intr_cisr = (1 << d->irq);
-}
-
-static struct irq_chip intc_irq_chip = {
- .name = "M68K-INTC",
- .irq_mask = intc_irq_mask,
- .irq_unmask = intc_irq_unmask,
- .irq_ack = intc_irq_ack,
-};
-
-/*
- * This function should be called during kernel startup to initialize
- * the vector table.
- */
-void __init trap_init(void)
-{
- int vba = (CPM_VECTOR_BASE<<4);
-
- /* set up the vectors */
- _ramvec[2] = buserr;
- _ramvec[3] = trap;
- _ramvec[4] = trap;
- _ramvec[5] = trap;
- _ramvec[6] = trap;
- _ramvec[7] = trap;
- _ramvec[8] = trap;
- _ramvec[9] = trap;
- _ramvec[10] = trap;
- _ramvec[11] = trap;
- _ramvec[12] = trap;
- _ramvec[13] = trap;
- _ramvec[14] = trap;
- _ramvec[15] = trap;
-
- _ramvec[32] = system_call;
- _ramvec[33] = trap;
-
- cpm_interrupt_init();
-
- /* set up CICR for vector base address and irq level */
- /* irl = 4, hp = 1f - see MC68360UM p 7-377 */
- pquicc->intr_cicr = 0x00e49f00 | vba;
-
- /* CPM interrupt vectors: (p 7-376) */
- _ramvec[vba+CPMVEC_ERROR] = bad_interrupt; /* Error */
- _ramvec[vba+CPMVEC_PIO_PC11] = inthandler; /* pio - pc11 */
- _ramvec[vba+CPMVEC_PIO_PC10] = inthandler; /* pio - pc10 */
- _ramvec[vba+CPMVEC_SMC2] = inthandler; /* smc2/pip */
- _ramvec[vba+CPMVEC_SMC1] = inthandler; /* smc1 */
- _ramvec[vba+CPMVEC_SPI] = inthandler; /* spi */
- _ramvec[vba+CPMVEC_PIO_PC9] = inthandler; /* pio - pc9 */
- _ramvec[vba+CPMVEC_TIMER4] = inthandler; /* timer 4 */
- _ramvec[vba+CPMVEC_RESERVED1] = inthandler; /* reserved */
- _ramvec[vba+CPMVEC_PIO_PC8] = inthandler; /* pio - pc8 */
- _ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
- _ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
- _ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
- _ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
- _ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
- _ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */
- _ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* timer table */
- _ramvec[vba+CPMVEC_TIMER2] = inthandler; /* timer 2 */
- _ramvec[vba+CPMVEC_RESERVED3] = inthandler; /* reserved */
- _ramvec[vba+CPMVEC_IDMA2] = inthandler; /* idma 2 */
- _ramvec[vba+CPMVEC_IDMA1] = inthandler; /* idma 1 */
- _ramvec[vba+CPMVEC_SDMA_CB_ERR] = inthandler; /* sdma channel bus error */
- _ramvec[vba+CPMVEC_PIO_PC3] = inthandler; /* pio - pc3 */
- _ramvec[vba+CPMVEC_PIO_PC2] = inthandler; /* pio - pc2 */
- /* _ramvec[vba+CPMVEC_TIMER1] = cpm_isr_timer1; */ /* timer 1 */
- _ramvec[vba+CPMVEC_TIMER1] = inthandler; /* timer 1 */
- _ramvec[vba+CPMVEC_PIO_PC1] = inthandler; /* pio - pc1 */
- _ramvec[vba+CPMVEC_SCC4] = inthandler; /* scc 4 */
- _ramvec[vba+CPMVEC_SCC3] = inthandler; /* scc 3 */
- _ramvec[vba+CPMVEC_SCC2] = inthandler; /* scc 2 */
- _ramvec[vba+CPMVEC_SCC1] = inthandler; /* scc 1 */
- _ramvec[vba+CPMVEC_PIO_PC0] = inthandler; /* pio - pc0 */
-
-
- /* turn off all CPM interrupts */
- pquicc->intr_cimr = 0x00000000;
-}
-
-void init_IRQ(void)
-{
- int i;
-
- for (i = 0; (i < NR_IRQS); i++) {
- irq_set_chip(i, &intc_irq_chip);
- irq_set_handler(i, handle_level_irq);
- }
-}
-
help
Motorola 68VZ328 processor support.
-config M68360
- bool "MC68360"
- depends on !MMU
- select MCPU32
- help
- Motorola 68360 processor support.
-
endif # M68KCLASSIC
if COLDFIRE
config EARLY_PRINTK
bool "Early printk"
- depends on !(SUN3 || M68360 || M68000 || COLDFIRE)
+ depends on !(SUN3 || M68000 || COLDFIRE)
help
Write kernel log output directly to a serial port.
Where implemented, output goes to the framebuffer as well.
help
Reserve certain memory regions on 68x328 based boards.
-config UCQUICC
- bool "Lineo uCquicc board support"
- depends on M68360
- help
- Support for the Lineo uCquicc board.
-
config ARN5206
bool "Arnewsh 5206 board support"
depends on M5206
endif
cpuflags-$(CONFIG_M68030) :=
cpuflags-$(CONFIG_M68020) :=
-cpuflags-$(CONFIG_M68360) := -m68332
cpuflags-$(CONFIG_M68000) := -m68000
cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e)
cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
#
head-y := arch/m68k/kernel/head.o
head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
-head-$(CONFIG_M68360) := arch/m68k/68360/head.o
head-$(CONFIG_M68000) := arch/m68k/68000/head.o
head-$(CONFIG_COLDFIRE) := arch/m68k/coldfire/head.o
core-$(CONFIG_M68040) += arch/m68k/fpsp040/
core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
-core-$(CONFIG_M68360) += arch/m68k/68360/
core-$(CONFIG_M68000) += arch/m68k/68000/
core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/
+++ /dev/null
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * through the 68360 internal memory map. See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space. The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
-#define CPM_CR_GCI_ABORT ((ushort)0x000a)
-#define CPM_CR_RESET_BCS ((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
-#define CPM_CR_CH_TMR ((ushort)0x0005)
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
- * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE ((uint)0x0000)
-#define CPM_DATAONLY_SIZE ((uint)0x0800)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
-extern QUICC *pquicc;
-uint m360_cpm_dpalloc(uint size);
-/* void *m360_cpm_hostalloc(uint size); */
-void m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
-
-#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
-
-#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
-#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
-
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
-
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so
- * instead, we need only a parameter ram `slot' */
-
-#define PRSLOT_SCC1 0
-#define PRSLOT_SCC2 1
-#define PRSLOT_SCC3 2
-#define PRSLOT_SMC1 2
-#define PRSLOT_SCC4 3
-#define PRSLOT_SMC2 3
-
-
-/* #define PROFF_SCC1 ((uint)0x0000) */
-/* #define PROFF_SCC2 ((uint)0x0100) */
-/* #define PROFF_SCC3 ((uint)0x0200) */
-/* #define PROFF_SMC1 ((uint)0x0280) */
-/* #define PROFF_SCC4 ((uint)0x0300) */
-/* #define PROFF_SMC2 ((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- * 68360 - lxt905
- * PA0/RXD1 - rxd
- * PA1/TXD1 - txd
- * PA8/CLK1 - tclk
- * PA9/CLK2 - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1 - cd
- */
-#define PA_ENET_RXD PA_RXD1
-#define PA_ENET_TXD PA_TXD1
-#define PA_ENET_TCLK PA_CLK1
-#define PA_ENET_RCLK PA_CLK2
-#define PC_ENET_TENA PC_RTS1
-#define PC_ENET_CLSN PC_CTS1
-#define PC_ENET_RENA PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
- * to the MBX860 board. Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PC_ENET_TENA ((ushort)0x0001)
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000003d)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC ((ushort)0x8000)
-#define SCU_PMSR_SL ((ushort)0x4000)
-#define SCU_PMSR_CL ((ushort)0x3000)
-#define SCU_PMSR_UM ((ushort)0x0c00)
-#define SCU_PMSR_FRZ ((ushort)0x0200)
-#define SCU_PMSR_RZS ((ushort)0x0100)
-#define SCU_PMSR_SYN ((ushort)0x0080)
-#define SCU_PMSR_DRT ((ushort)0x0040)
-#define SCU_PMSR_PEN ((ushort)0x0010)
-#define SCU_PMSR_RPM ((ushort)0x000c)
-#define SCU_PMSR_REVP ((ushort)0x0008)
-#define SCU_PMSR_TPM ((ushort)0x0003)
-#define SCU_PMSR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR 32 */
-/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_I2C ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#endif /* __CPM_360__ */
+++ /dev/null
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-#include <asm/m68360_quicc.h>
-#include <asm/m68360_enet.h>
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT 4
-
-/* see MC68360 User's Manual, p. 7-377 */
-#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
+++ /dev/null
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include <asm/quicc_simple.h>
-
-/*
- * transmit BD's
- */
-#define T_R 0x8000 /* ready bit */
-#define E_T_PAD 0x4000 /* short frame padding */
-#define T_W 0x2000 /* wrap bit */
-#define T_I 0x1000 /* interrupt on completion */
-#define T_L 0x0800 /* last in frame */
-#define T_TC 0x0400 /* transmit CRC (when last) */
-
-#define T_DEF 0x0200 /* defer indication */
-#define T_HB 0x0100 /* heartbeat */
-#define T_LC 0x0080 /* error: late collision */
-#define T_RL 0x0040 /* error: retransmission limit */
-#define T_RC 0x003c /* retry count */
-#define T_UN 0x0002 /* error: underrun */
-#define T_CSL 0x0001 /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E 0x8000 /* buffer empty */
-#define R_W 0x2000 /* wrap bit */
-#define R_I 0x1000 /* interrupt on reception */
-#define R_L 0x0800 /* last BD in frame */
-#define R_F 0x0400 /* first BD in frame */
-#define R_M 0x0100 /* received because of promisc. mode */
-
-#define R_LG 0x0020 /* frame too long */
-#define R_NO 0x0010 /* non-octet aligned */
-#define R_SH 0x0008 /* short frame */
-#define R_CR 0x0004 /* receive CRC error */
-#define R_OV 0x0002 /* receive overrun */
-#define R_CL 0x0001 /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA 0x0080 /* graceful stop complete */
-#define ETHERNET_TXE 0x0010 /* transmit error */
-#define ETHERNET_RXF 0x0008 /* receive frame */
-#define ETHERNET_BSY 0x0004 /* busy condition */
-#define ETHERNET_TXB 0x0002 /* transmit buffer */
-#define ETHERNET_RXB 0x0001 /* receive buffer */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC 0x8000 /* heartbeat checking */
-#define ETHER_FC 0x4000 /* force collision */
-#define ETHER_RSH 0x2000 /* receive short frames */
-#define ETHER_IAM 0x1000 /* individual address mode */
-#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */
-#define ETHER_PRO 0x0200 /* promiscuous */
-#define ETHER_BRO 0x0100 /* broadcast address */
-#define ETHER_SBT 0x0080 /* stop backoff timer */
-#define ETHER_LPB 0x0040 /* Loop Back Mode */
-#define ETHER_SIP 0x0020 /* sample input pins */
-#define ETHER_LCW 0x0010 /* late collision window */
-#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */
-#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */
-#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */
-#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */
-#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */
-#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */
-#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */
-#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4 /* Length in bytes of CRC */
-#define C_PRES 0xffffffff /* preform 32 bit CRC */
-#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */
-#define CRCEC 0x00000000
-#define ALEC 0x00000000
-#define DISFC 0x00000000
-#define PADS 0x00000000
-#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee /* 1518 max frame size */
-#define MINFLR 0x0040 /* Minimum frame size 64 */
-#define MAXD1 0x05ee /* Max dma count 1518 */
-#define MAXD2 0x05ee
-#define GADDR1 0x00000000 /* Clear group address */
-#define GADDR2 0x00000000
-#define GADDR3 0x00000000
-#define GADDR4 0x00000000
-#define P_PER 0x00000000 /*not used */
-#define IADDR1 0x00000000 /* Individual hash table not used */
-#define IADDR2 0x00000000
-#define IADDR3 0x00000000
-#define IADDR4 0x00000000
-#define TADDR_H 0x00000000 /* clear this regs */
-#define TADDR_M 0x00000000
-#define TADDR_L 0x00000000
-
-/* SCC Parameter Ram */
-#define RFCR 0x18 /* normal operation */
-#define TFCR 0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
-} ETHER_ADDR;
-
-typedef struct {
- int max_frame_length;
- int promisc_mode;
- int reject_broadcast;
- ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[MAX_DATALEN];
- unsigned char fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int scc_number,
- alloc_routine *alloc_buffer,
- free_routine *free_buffer,
- store_rx_buffer_routine *store_rx_buffer,
- handle_tx_error_routine *handle_tx_error,
- handle_rx_error_routine *handle_rx_error,
- handle_lost_error_routine *handle_lost_error,
- ETHER_SPECIFIC *ether_spec);
-int ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
+++ /dev/null
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT 0x8000
-#define WRAP_SLOT 0x4000
-
-/*****************************************************************
- Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
- /*
- * Global Multichannel parameter RAM
- */
- unsigned long mcbase; /* Multichannel Base pointer */
- unsigned short qmcstate; /* Multichannel Controller state */
- unsigned short mrblr; /* Maximum Receive Buffer Length */
- unsigned short tx_s_ptr; /* TSTATx Pointer */
- unsigned short rxptr; /* Current Time slot entry in TSATRx */
- unsigned short grfthr; /* Global Receive frame threshold */
- unsigned short grfcnt; /* Global Receive Frame Count */
- unsigned long intbase; /* Multichannel Base address */
- unsigned long iintptr; /* Pointer to interrupt queue */
- unsigned short rx_s_ptr; /* TSTARx Pointer */
-
- unsigned short txptr; /* Current Time slot entry in TSATTx */
- unsigned long c_mask32; /* CRC Constant (debb20e3) */
- unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */
- unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */
- unsigned short c_mask16; /* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
- Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
- unsigned short tbase; /* Tx Buffer Descriptors Base Address */
- unsigned short chamr; /* Channel Mode Register */
- unsigned long tstate; /* Tx Internal State */
- unsigned long txintr; /* Tx Internal Data Pointer */
- unsigned short tbptr; /* Tx Buffer Descriptor Pointer */
- unsigned short txcntr; /* Tx Internal Byte Count */
- unsigned long tupack; /* (Tx Temp) */
- unsigned long zistate; /* Zero Insertion machine state */
- unsigned long tcrc; /* Temp Transmit CRC */
- unsigned short intmask; /* Channel's interrupt mask flags */
- unsigned short bdflags;
- unsigned short rbase; /* Rx Buffer Descriptors Base Address */
- unsigned short mflr; /* Max Frame Length Register */
- unsigned long rstate; /* Rx Internal State */
- unsigned long rxintr; /* Rx Internal Data Pointer */
- unsigned short rbptr; /* Rx Buffer Descriptor Pointer */
- unsigned short rxbyc; /* Rx Internal Byte Count */
- unsigned long rpack; /* (Rx Temp) */
- unsigned long zdstate; /* Zero Deletion machine state */
- unsigned long rcrc; /* Temp Transmit CRC */
- unsigned short maxc; /* Max_length counter */
- unsigned short tmp_mb; /* Temp */
-};
-
-
-/*****************************************************************
- HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * HDLC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long c_mask; /* CRC constant */
- unsigned long c_pres; /* CRC preset */
- unsigned short disfc; /* discarded frame counter */
- unsigned short crcec; /* CRC error counter */
- unsigned short abtsc; /* abort sequence counter */
- unsigned short nmarc; /* nonmatching address rx cnt */
- unsigned short retrc; /* frame retransmission cnt */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short max_cnt; /* maximum length counter */
- unsigned short rfthr; /* received frames threshold */
- unsigned short rfcnt; /* received frames count */
- unsigned short hmask; /* user defined frm addr mask */
- unsigned short haddr1; /* user defined frm address 1 */
- unsigned short haddr2; /* user defined frm address 2 */
- unsigned short haddr3; /* user defined frm address 3 */
- unsigned short haddr4; /* user defined frm address 4 */
- unsigned short tmp; /* temp */
- unsigned short tmp_mb; /* temp */
-};
-
-
-
-/*****************************************************************
- UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID 0x8000 /* control character is valid */
-#define CC_REJ 0x4000 /* don't store char in buffer */
-#define CC_CHAR 0x00ff /* control character */
-
-/* UART */
-struct uart_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rx_temp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * UART specific parameter RAM
- */
- unsigned char RESERVED1[8]; /* Reserved area */
- unsigned short max_idl; /* maximum idle characters */
- unsigned short idlc; /* rx idle counter (internal) */
- unsigned short brkcr; /* break count register */
-
- unsigned short parec; /* Rx parity error counter */
- unsigned short frmer; /* Rx framing error counter */
- unsigned short nosec; /* Rx noise counter */
- unsigned short brkec; /* Rx break character counter */
- unsigned short brkln; /* Receive break length */
-
- unsigned short uaddr1; /* address character 1 */
- unsigned short uaddr2; /* address character 2 */
- unsigned short rtemp; /* temp storage */
- unsigned short toseq; /* Tx out of sequence char */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Rx control char mask */
- unsigned short rccr; /* Rx control char register */
- unsigned short rlbc; /* Receive last break char */
-};
-
-
-
-/*****************************************************************
- BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * BISYNC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long crcc; /* CRC Constant Temp Value */
- unsigned short prcrc; /* Preset Receiver CRC-16/LRC */
- unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */
- unsigned short parec; /* Receive Parity Error Counter */
- unsigned short bsync; /* BISYNC SYNC Character */
- unsigned short bdle; /* BISYNC DLE Character */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Receive Control Character Mask */
-};
-
-/*****************************************************************
- IOM2 parameter RAM
- (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
- unsigned short ci_data; /* ci data */
- unsigned short monitor_data; /* monitor data */
- unsigned short tstate; /* transmitter state */
- unsigned short rstate; /* receiver state */
-};
-
-/*****************************************************************
- SPI/SMC parameter RAM
- (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R 0x8000 /* Ready bit in BD */
-
-struct spi_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
-};
-
-struct smc_uart_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short max_idl; /* Maximum IDLE Characters */
- unsigned short idlc; /* Temporary IDLE Counter */
- unsigned short brkln; /* Last Rx Break Length */
- unsigned short brkec; /* Rx Break Condition Counter */
- unsigned short brkcr; /* Break Count Register (Tx) */
- unsigned short r_mask; /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
- unsigned short rbase; /* rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short reserved[5]; /* Reserved */
-};
-
-struct idma_pram {
- unsigned short ibase; /* IDMA BD Base Address */
- unsigned short ibptr; /* IDMA buffer descriptor pointer */
- unsigned long istate; /* IDMA internal state */
- unsigned long itemp; /* IDMA temp */
-};
-
-struct ethernet_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * ETHERNET specific parameter RAM
- */
- unsigned long c_pres; /* preset CRC */
- unsigned long c_mask; /* constant mask for CRC */
- unsigned long crcec; /* CRC error counter */
- unsigned long alec; /* alignment error counter */
- unsigned long disfc; /* discard frame counter */
- unsigned short pads; /* short frame PAD characters */
- unsigned short ret_lim; /* retry limit threshold */
- unsigned short ret_cnt; /* retry limit counter */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short minflr; /* minimum frame length reg */
- unsigned short maxd1; /* maximum DMA1 length reg */
- unsigned short maxd2; /* maximum DMA2 length reg */
- unsigned short maxd; /* rx max DMA */
- unsigned short dma_cnt; /* rx dma counter */
- unsigned short max_b; /* max bd byte count */
- unsigned short gaddr1; /* group address filter 1 */
- unsigned short gaddr2; /* group address filter 2 */
- unsigned short gaddr3; /* group address filter 3 */
- unsigned short gaddr4; /* group address filter 4 */
- unsigned long tbuf0_data0; /* save area 0 - current frm */
- unsigned long tbuf0_data1; /* save area 1 - current frm */
- unsigned long tbuf0_rba0;
- unsigned long tbuf0_crc;
- unsigned short tbuf0_bcnt;
- union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
- } paddr;
- unsigned short p_per; /* persistence */
- unsigned short rfbd_ptr; /* rx first bd pointer */
- unsigned short tfbd_ptr; /* tx first bd pointer */
- unsigned short tlbd_ptr; /* tx last bd pointer */
- unsigned long tbuf1_data0; /* save area 0 - next frame */
- unsigned long tbuf1_data1; /* save area 1 - next frame */
- unsigned long tbuf1_rba0;
- unsigned long tbuf1_crc;
- unsigned short tbuf1_bcnt;
- unsigned short tx_len; /* tx frame length counter */
- unsigned short iaddr1; /* individual address filter 1*/
- unsigned short iaddr2; /* individual address filter 2*/
- unsigned short iaddr3; /* individual address filter 3*/
- unsigned short iaddr4; /* individual address filter 4*/
- unsigned short boff_cnt; /* back-off counter */
- unsigned short taddr_h; /* temp address (MSB) */
- unsigned short taddr_m; /* temp address */
- unsigned short taddr_l; /* temp address (LSB) */
-};
-
-struct transparent_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * TRANSPARENT specific parameter RAM
- */
- unsigned long crc_p; /* CRC Preset */
- unsigned long crc_c; /* CRC constant */
-};
-
-struct timer_pram {
- /*
- * RISC timers parameter RAM
- */
- unsigned short tm_base; /* RISC timer table base adr */
- unsigned short tm_ptr; /* RISC timer table pointer */
- unsigned short r_tmr; /* RISC timer mode register */
- unsigned short r_tmv; /* RISC timer valid register */
- unsigned long tm_cmd; /* RISC timer cmd register */
- unsigned long tm_cnt; /* RISC timer internal cnt */
-};
-
-#endif
+++ /dev/null
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
- volatile unsigned short status;
- volatile unsigned short length;
- volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/
- volatile unsigned char udata_bd[0x200]; /*user data Ucode */
- volatile unsigned char ucode_ext[0x100]; /*Ucode Extension ram */
- volatile unsigned char RESERVED1[0x500]; /* Reserved area */
-};
-#else
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
- volatile unsigned char udata_bd1[0x200]; /* user, bds */
- volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
- volatile unsigned char udata_bd2[0x100]; /* user, bds */
- volatile unsigned char RESERVED1[0x400]; /* Reserved area */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
- union {
- struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */
- struct user_data u;
- }ch_or_u; /* multipul or user space */
-
- /* BASE + 0xc00: PARAMETER RAM */
- union {
- struct scc_pram {
- union {
- struct hdlc_pram h;
- struct uart_pram u;
- struct bisync_pram b;
- struct transparent_pram t;
- unsigned char RESERVED66[0x70];
- } pscc; /* scc parameter area (protocol dependent) */
- union {
- struct {
- unsigned char RESERVED70[0x10];
- struct spi_pram spi;
- unsigned char RESERVED72[0x8];
- struct timer_pram timer;
- } timer_spi;
- struct {
- struct idma_pram idma;
- unsigned char RESERVED67[0x4];
- union {
- struct smc_uart_pram u;
- struct smc_trnsp_pram t;
- } psmc;
- } idma_smc;
- } pothers;
- } scc;
- struct ethernet_pram enet_scc;
- struct global_multi_pram m;
- unsigned char pr[0x100];
- } pram[4];
-
- /* reserved */
-
- /* BASE + 0x1000: INTERNAL REGISTERS */
- /* SIM */
- volatile unsigned long sim_mcr; /* module configuration reg */
- volatile unsigned short sim_simtr; /* module test register */
- volatile unsigned char RESERVED2[0x2]; /* Reserved area */
- volatile unsigned char sim_avr; /* auto vector reg */
- volatile unsigned char sim_rsr; /* reset status reg */
- volatile unsigned char RESERVED3[0x2]; /* Reserved area */
- volatile unsigned char sim_clkocr; /* CLCO control register */
- volatile unsigned char RESERVED62[0x3]; /* Reserved area */
- volatile unsigned short sim_pllcr; /* PLL control register */
- volatile unsigned char RESERVED63[0x2]; /* Reserved area */
- volatile unsigned short sim_cdvcr; /* Clock devider control register */
- volatile unsigned short sim_pepar; /* Port E pin assignment register */
- volatile unsigned char RESERVED64[0xa]; /* Reserved area */
- volatile unsigned char sim_sypcr; /* system protection control*/
- volatile unsigned char sim_swiv; /* software interrupt vector*/
- volatile unsigned char RESERVED6[0x2]; /* Reserved area */
- volatile unsigned short sim_picr; /* periodic interrupt control reg */
- volatile unsigned char RESERVED7[0x2]; /* Reserved area */
- volatile unsigned short sim_pitr; /* periodic interrupt timing reg */
- volatile unsigned char RESERVED8[0x3]; /* Reserved area */
- volatile unsigned char sim_swsr; /* software service */
- volatile unsigned long sim_bkar; /* breakpoint address register*/
- volatile unsigned long sim_bkcr; /* breakpoint control register*/
- volatile unsigned char RESERVED10[0x8]; /* Reserved area */
- /* MEMC */
- volatile unsigned long memc_gmr; /* Global memory register */
- volatile unsigned short memc_mstat; /* MEMC status register */
- volatile unsigned char RESERVED11[0xa]; /* Reserved area */
- volatile unsigned long memc_br0; /* base register 0 */
- volatile unsigned long memc_or0; /* option register 0 */
- volatile unsigned char RESERVED12[0x8]; /* Reserved area */
- volatile unsigned long memc_br1; /* base register 1 */
- volatile unsigned long memc_or1; /* option register 1 */
- volatile unsigned char RESERVED13[0x8]; /* Reserved area */
- volatile unsigned long memc_br2; /* base register 2 */
- volatile unsigned long memc_or2; /* option register 2 */
- volatile unsigned char RESERVED14[0x8]; /* Reserved area */
- volatile unsigned long memc_br3; /* base register 3 */
- volatile unsigned long memc_or3; /* option register 3 */
- volatile unsigned char RESERVED15[0x8]; /* Reserved area */
- volatile unsigned long memc_br4; /* base register 3 */
- volatile unsigned long memc_or4; /* option register 3 */
- volatile unsigned char RESERVED16[0x8]; /* Reserved area */
- volatile unsigned long memc_br5; /* base register 3 */
- volatile unsigned long memc_or5; /* option register 3 */
- volatile unsigned char RESERVED17[0x8]; /* Reserved area */
- volatile unsigned long memc_br6; /* base register 3 */
- volatile unsigned long memc_or6; /* option register 3 */
- volatile unsigned char RESERVED18[0x8]; /* Reserved area */
- volatile unsigned long memc_br7; /* base register 3 */
- volatile unsigned long memc_or7; /* option register 3 */
- volatile unsigned char RESERVED9[0x28]; /* Reserved area */
- /* TEST */
- volatile unsigned short test_tstmra; /* master shift a */
- volatile unsigned short test_tstmrb; /* master shift b */
- volatile unsigned short test_tstsc; /* shift count */
- volatile unsigned short test_tstrc; /* repetition counter */
- volatile unsigned short test_creg; /* control */
- volatile unsigned short test_dreg; /* destributed register */
- volatile unsigned char RESERVED58[0x404]; /* Reserved area */
- /* IDMA1 */
- volatile unsigned short idma_iccr; /* channel configuration reg*/
- volatile unsigned char RESERVED19[0x2]; /* Reserved area */
- volatile unsigned short idma1_cmr; /* dma mode reg */
- volatile unsigned char RESERVED68[0x2]; /* Reserved area */
- volatile unsigned long idma1_sapr; /* dma source addr ptr */
- volatile unsigned long idma1_dapr; /* dma destination addr ptr */
- volatile unsigned long idma1_bcr; /* dma byte count reg */
- volatile unsigned char idma1_fcr; /* function code reg */
- volatile unsigned char RESERVED20; /* Reserved area */
- volatile unsigned char idma1_cmar; /* channel mask reg */
- volatile unsigned char RESERVED21; /* Reserved area */
- volatile unsigned char idma1_csr; /* channel status reg */
- volatile unsigned char RESERVED22[0x3]; /* Reserved area */
- /* SDMA */
- volatile unsigned char sdma_sdsr; /* status reg */
- volatile unsigned char RESERVED23; /* Reserved area */
- volatile unsigned short sdma_sdcr; /* configuration reg */
- volatile unsigned long sdma_sdar; /* address reg */
- /* IDMA2 */
- volatile unsigned char RESERVED69[0x2]; /* Reserved area */
- volatile unsigned short idma2_cmr; /* dma mode reg */
- volatile unsigned long idma2_sapr; /* dma source addr ptr */
- volatile unsigned long idma2_dapr; /* dma destination addr ptr */
- volatile unsigned long idma2_bcr; /* dma byte count reg */
- volatile unsigned char idma2_fcr; /* function code reg */
- volatile unsigned char RESERVED24; /* Reserved area */
- volatile unsigned char idma2_cmar; /* channel mask reg */
- volatile unsigned char RESERVED25; /* Reserved area */
- volatile unsigned char idma2_csr; /* channel status reg */
- volatile unsigned char RESERVED26[0x7]; /* Reserved area */
- /* Interrupt Controller */
- volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/
- volatile unsigned long intr_cipr; /* CP interrupt pending reg */
- volatile unsigned long intr_cimr; /* CP interrupt mask reg */
- volatile unsigned long intr_cisr; /* CP interrupt in service reg*/
- /* Parallel I/O */
- volatile unsigned short pio_padir; /* port A data direction reg */
- volatile unsigned short pio_papar; /* port A pin assignment reg */
- volatile unsigned short pio_paodr; /* port A open drain reg */
- volatile unsigned short pio_padat; /* port A data register */
- volatile unsigned char RESERVED28[0x8]; /* Reserved area */
- volatile unsigned short pio_pcdir; /* port C data direction reg*/
- volatile unsigned short pio_pcpar; /* port C pin assignment reg*/
- volatile unsigned short pio_pcso; /* port C special options */
- volatile unsigned short pio_pcdat; /* port C data register */
- volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */
- volatile unsigned char RESERVED29[0x16]; /* Reserved area */
- /* Timer */
- volatile unsigned short timer_tgcr; /* timer global configuration reg */
- volatile unsigned char RESERVED30[0xe]; /* Reserved area */
- volatile unsigned short timer_tmr1; /* timer 1 mode reg */
- volatile unsigned short timer_tmr2; /* timer 2 mode reg */
- volatile unsigned short timer_trr1; /* timer 1 referance reg */
- volatile unsigned short timer_trr2; /* timer 2 referance reg */
- volatile unsigned short timer_tcr1; /* timer 1 capture reg */
- volatile unsigned short timer_tcr2; /* timer 2 capture reg */
- volatile unsigned short timer_tcn1; /* timer 1 counter reg */
- volatile unsigned short timer_tcn2; /* timer 2 counter reg */
- volatile unsigned short timer_tmr3; /* timer 3 mode reg */
- volatile unsigned short timer_tmr4; /* timer 4 mode reg */
- volatile unsigned short timer_trr3; /* timer 3 referance reg */
- volatile unsigned short timer_trr4; /* timer 4 referance reg */
- volatile unsigned short timer_tcr3; /* timer 3 capture reg */
- volatile unsigned short timer_tcr4; /* timer 4 capture reg */
- volatile unsigned short timer_tcn3; /* timer 3 counter reg */
- volatile unsigned short timer_tcn4; /* timer 4 counter reg */
- volatile unsigned short timer_ter1; /* timer 1 event reg */
- volatile unsigned short timer_ter2; /* timer 2 event reg */
- volatile unsigned short timer_ter3; /* timer 3 event reg */
- volatile unsigned short timer_ter4; /* timer 4 event reg */
- volatile unsigned char RESERVED34[0x8]; /* Reserved area */
- /* CP */
- volatile unsigned short cp_cr; /* command register */
- volatile unsigned char RESERVED35[0x2]; /* Reserved area */
- volatile unsigned short cp_rccr; /* main configuration reg */
- volatile unsigned char RESERVED37; /* Reserved area */
- volatile unsigned char cp_rmds; /* development support status reg */
- volatile unsigned long cp_rmdr; /* development support control reg */
- volatile unsigned short cp_rctr1; /* ram break register 1 */
- volatile unsigned short cp_rctr2; /* ram break register 2 */
- volatile unsigned short cp_rctr3; /* ram break register 3 */
- volatile unsigned short cp_rctr4; /* ram break register 4 */
- volatile unsigned char RESERVED59[0x2]; /* Reserved area */
- volatile unsigned short cp_rter; /* RISC timers event reg */
- volatile unsigned char RESERVED38[0x2]; /* Reserved area */
- volatile unsigned short cp_rtmr; /* RISC timers mask reg */
- volatile unsigned char RESERVED39[0x14]; /* Reserved area */
- /* BRG */
- union {
- volatile unsigned long l;
- struct {
- volatile unsigned short BRGC_RESERV:14;
- volatile unsigned short rst:1;
- volatile unsigned short en:1;
- volatile unsigned short extc:2;
- volatile unsigned short atb:1;
- volatile unsigned short cd:12;
- volatile unsigned short div16:1;
- } b;
- } brgc[4]; /* BRG1-BRG4 configuration regs*/
- /* SCC registers */
- struct scc_regs {
- union {
- struct {
- /* Low word. */
- volatile unsigned short GSMR_RESERV2:1;
- volatile unsigned short edge:2;
- volatile unsigned short tci:1;
- volatile unsigned short tsnc:2;
- volatile unsigned short rinv:1;
- volatile unsigned short tinv:1;
- volatile unsigned short tpl:3;
- volatile unsigned short tpp:2;
- volatile unsigned short tend:1;
- volatile unsigned short tdcr:2;
- volatile unsigned short rdcr:2;
- volatile unsigned short renc:3;
- volatile unsigned short tenc:3;
- volatile unsigned short diag:2;
- volatile unsigned short enr:1;
- volatile unsigned short ent:1;
- volatile unsigned short mode:4;
- /* High word. */
- volatile unsigned short GSMR_RESERV1:14;
- volatile unsigned short pri:1;
- volatile unsigned short gde:1;
- volatile unsigned short tcrc:2;
- volatile unsigned short revd:1;
- volatile unsigned short trx:1;
- volatile unsigned short ttx:1;
- volatile unsigned short cdp:1;
- volatile unsigned short ctsp:1;
- volatile unsigned short cds:1;
- volatile unsigned short ctss:1;
- volatile unsigned short tfl:1;
- volatile unsigned short rfw:1;
- volatile unsigned short txsy:1;
- volatile unsigned short synl:2;
- volatile unsigned short rtsm:1;
- volatile unsigned short rsyn:1;
- } b;
- struct {
- volatile unsigned long low;
- volatile unsigned long high;
- } w;
- } scc_gsmr; /* SCC general mode reg */
- volatile unsigned short scc_psmr; /* protocol specific mode reg */
- volatile unsigned char RESERVED42[0x2]; /* Reserved area */
- volatile unsigned short scc_todr; /* SCC transmit on demand */
- volatile unsigned short scc_dsr; /* SCC data sync reg */
- volatile unsigned short scc_scce; /* SCC event reg */
- volatile unsigned char RESERVED43[0x2];/* Reserved area */
- volatile unsigned short scc_sccm; /* SCC mask reg */
- volatile unsigned char RESERVED44[0x1];/* Reserved area */
- volatile unsigned char scc_sccs; /* SCC status reg */
- volatile unsigned char RESERVED45[0x8]; /* Reserved area */
- } scc_regs[4];
- /* SMC */
- struct smc_regs {
- volatile unsigned char RESERVED46[0x2]; /* Reserved area */
- volatile unsigned short smc_smcmr; /* SMC mode reg */
- volatile unsigned char RESERVED60[0x2]; /* Reserved area */
- volatile unsigned char smc_smce; /* SMC event reg */
- volatile unsigned char RESERVED47[0x3]; /* Reserved area */
- volatile unsigned char smc_smcm; /* SMC mask reg */
- volatile unsigned char RESERVED48[0x5]; /* Reserved area */
- } smc_regs[2];
- /* SPI */
- volatile unsigned short spi_spmode; /* SPI mode reg */
- volatile unsigned char RESERVED51[0x4]; /* Reserved area */
- volatile unsigned char spi_spie; /* SPI event reg */
- volatile unsigned char RESERVED52[0x3]; /* Reserved area */
- volatile unsigned char spi_spim; /* SPI mask reg */
- volatile unsigned char RESERVED53[0x2]; /* Reserved area */
- volatile unsigned char spi_spcom; /* SPI command reg */
- volatile unsigned char RESERVED54[0x4]; /* Reserved area */
- /* PIP */
- volatile unsigned short pip_pipc; /* pip configuration reg */
- volatile unsigned char RESERVED65[0x2]; /* Reserved area */
- volatile unsigned short pip_ptpr; /* pip timing parameters reg */
- volatile unsigned long pip_pbdir; /* port b data direction reg */
- volatile unsigned long pip_pbpar; /* port b pin assignment reg */
- volatile unsigned long pip_pbodr; /* port b open drain reg */
- volatile unsigned long pip_pbdat; /* port b data reg */
- volatile unsigned char RESERVED71[0x18]; /* Reserved area */
- /* Serial Interface */
- volatile unsigned long si_simode; /* SI mode register */
- volatile unsigned char si_sigmr; /* SI global mode register */
- volatile unsigned char RESERVED55; /* Reserved area */
- volatile unsigned char si_sistr; /* SI status register */
- volatile unsigned char si_sicmr; /* SI command register */
- volatile unsigned char RESERVED56[0x4]; /* Reserved area */
- volatile unsigned long si_sicr; /* SI clock routing */
- volatile unsigned long si_sirp; /* SI ram pointers */
- volatile unsigned char RESERVED57[0xc]; /* Reserved area */
- volatile unsigned short si_siram[0x80]; /* SI routing ram */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
+++ /dev/null
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit) x =bit
-
-/*****************************************************************
- Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET 0x8000
-#define CMD_OPCODE 0x0f00
-#define CMD_CHANNEL 0x00f0
-#define CMD_FLAG 0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS 0x0000
-#define INIT_RX_PARAMS 0x0100
-#define INIT_TX_PARAMS 0x0200
-#define ENTER_HUNT_MODE 0x0300
-#define STOP_TX 0x0400
-#define GR_STOP_TX 0x0500
-#define RESTART_TX 0x0600
-#define CLOSE_RX_BD 0x0700
-#define SET_ENET_GROUP 0x0800
-#define RESET_ENET_GROUP 0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32 0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV 0x01
-#define GUN 0x02
-#define GINT 0x04
-#define IQOV 0x08
-
-
-/* Timer commands */
-#define SET_TIMER 0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID 0x8000 /* Valid interrupt entry */
-#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */
-#define INTR_MASK_BITS 0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC 0x0
-#define MODE_APPLE_TALK 0x2
-#define MODE_SS7 0x3
-#define MODE_UART 0x4
-#define MODE_PROFIBUS 0x5
-#define MODE_ASYNC_HDLC 0x6
-#define MODE_V14 0x7
-#define MODE_BISYNC 0x8
-#define MODE_DDCMP 0x9
-#define MODE_MULTI_CHANNEL 0xa
-#define MODE_ETHERNET 0xc
-
-#define DIAG_NORMAL 0x0
-#define DIAG_LOCAL_LPB 0x1
-#define DIAG_AUTO_ECHO 0x2
-#define DIAG_LBP_ECHO 0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ 0x0
-#define ENC_NRZI 0x1
-#define ENC_FM0 0x2
-#define ENC_MANCH 0x4
-#define ENC_DIFF_MANC 0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1 0x0
-#define CLOCK_RATE_8 0x1
-#define CLOCK_RATE_16 0x2
-#define CLOCK_RATE_32 0x3
-
-#define TPP_00 0x0
-#define TPP_10 0x1
-#define TPP_01 0x2
-#define TPP_11 0x3
-
-#define TPL_NO 0x0
-#define TPL_8 0x1
-#define TPL_16 0x2
-#define TPL_32 0x3
-#define TPL_48 0x4
-#define TPL_64 0x5
-#define TPL_128 0x6
-
-#define TSNC_INFINITE 0x0
-#define TSNC_14_65 0x1
-#define TSNC_4_15 0x2
-#define TSNC_3_1 0x3
-
-#define EDGE_BOTH 0x0
-#define EDGE_POS 0x1
-#define EDGE_NEG 0x2
-#define EDGE_NO 0x3
-
-#define SYNL_NO 0x0
-#define SYNL_4 0x1
-#define SYNL_8 0x2
-#define SYNL_16 0x3
-
-#define TCRC_CCITT16 0x0
-#define TCRC_CRC16 0x1
-#define TCRC_CCITT32 0x2
-
-
-/*****************************************************************
- TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD 0x8000 /* Transmit on demand */
-
-
-/*****************************************************************
- CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-
-
-/*****************************************************************
- Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */
-#define INTR_SCC1 0x40000000 /* SCC port 1 */
-#define INTR_SCC2 0x20000000 /* SCC port 2 */
-#define INTR_SCC3 0x10000000 /* SCC port 3 */
-#define INTR_SCC4 0x08000000 /* SCC port 4 */
-#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */
-#define INTR_TIMER1 0x02000000 /* timer 1 */
-#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */
-#define INTR_DMA1 0x00200000 /* idma 1 */
-#define INTR_DMA2 0x00100000 /* idma 2 */
-#define INTR_TIMER2 0x00040000 /* timer 2 */
-#define INTR_CP_TIMER 0x00020000 /* CP timer */
-#define INTR_PIP_STATUS 0x00010000 /* PIP status */
-#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */
-#define INTR_TIMER3 0x00001000 /* timer 3 */
-#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */
-#define INTR_TIMER4 0x00000080 /* timer 4 */
-#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */
-#define INTR_SCP 0x00000020 /* SCP */
-#define INTR_SMC1 0x00000010 /* SMC 1 */
-#define INTR_SMC2 0x00000008 /* SMC 2 */
-#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */
-#define INTR_ERR 0x00000001 /* error */
-
-
-/*****************************************************************
- CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR 32
-#define CPMVEC_PIO_PC0 0x1f
-#define CPMVEC_SCC1 0x1e
-#define CPMVEC_SCC2 0x1d
-#define CPMVEC_SCC3 0x1c
-#define CPMVEC_SCC4 0x1b
-#define CPMVEC_PIO_PC1 0x1a
-#define CPMVEC_TIMER1 0x19
-#define CPMVEC_PIO_PC2 0x18
-#define CPMVEC_PIO_PC3 0x17
-#define CPMVEC_SDMA_CB_ERR 0x16
-#define CPMVEC_IDMA1 0x15
-#define CPMVEC_IDMA2 0x14
-#define CPMVEC_RESERVED3 0x13
-#define CPMVEC_TIMER2 0x12
-#define CPMVEC_RISCTIMER 0x11
-#define CPMVEC_RESERVED2 0x10
-#define CPMVEC_PIO_PC4 0x0f
-#define CPMVEC_PIO_PC5 0x0e
-#define CPMVEC_TIMER3 0x0c
-#define CPMVEC_PIO_PC6 0x0b
-#define CPMVEC_PIO_PC7 0x0a
-#define CPMVEC_PIO_PC8 0x09
-#define CPMVEC_RESERVED1 0x08
-#define CPMVEC_TIMER4 0x07
-#define CPMVEC_PIO_PC9 0x06
-#define CPMVEC_SPI 0x05
-#define CPMVEC_SMC1 0x04
-#define CPMVEC_SMC2 0x03
-#define CPMVEC_PIO_PC10 0x02
-#define CPMVEC_PIO_PC11 0x01
-#define CPMVEC_ERROR 0x00
-
-/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_RESERVED3 ((ushort)0x13) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_RESERVED2 ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */
-/* #define CPMVEC_RESERVED1 ((ushort)0x08) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-
-/*****************************************************************
- * PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- *
- * Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1 ((ushort)0x0001)
-#define PA_TXD1 ((ushort)0x0002)
-#define PA_RXD2 ((ushort)0x0004)
-#define PA_TXD2 ((ushort)0x0008)
-#define PA_RXD3 ((ushort)0x0010)
-#define PA_TXD3 ((ushort)0x0020)
-#define PA_RXD4 ((ushort)0x0040)
-#define PA_TXD4 ((ushort)0x0080)
-
-#define PA_CLK1 ((ushort)0x0100)
-#define PA_CLK2 ((ushort)0x0200)
-#define PA_CLK3 ((ushort)0x0400)
-#define PA_CLK4 ((ushort)0x0800)
-#define PA_CLK5 ((ushort)0x1000)
-#define PA_CLK6 ((ushort)0x2000)
-#define PA_CLK7 ((ushort)0x4000)
-#define PA_CLK8 ((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1 ((ushort)0x0001)
-#define PC_RTS2 ((ushort)0x0002)
-#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1 ((ushort)0x0010)
-#define PC_CD1 ((ushort)0x0020)
-#define PC_CTS2 ((ushort)0x0040)
-#define PC_CD2 ((ushort)0x0080)
-#define PC_CTS3 ((ushort)0x0100)
-#define PC_CD3 ((ushort)0x0200)
-#define PC_CTS4 ((ushort)0x0400)
-#define PC_CD4 ((ushort)0x0800)
-
-
-
-/*****************************************************************
- chip select option register
-*****************************************************************/
-#define DTACK 0xe000
-#define ADR_MASK 0x1ffc
-#define RDWR_MASK 0x0002
-#define FC_MASK 0x0001
-
-/*****************************************************************
- tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) { \
- if((bd)->status & T_W) \
- (bd) = TBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD(bd,quicc,pram) { \
- if ((bd) == TBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD(bd,quicc,pram) { \
- if((bd)->status & R_W) \
- (bd) = RBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD(bd,quicc,pram) { \
- if ((bd) == RBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-/*****************************************************************
- Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
- (&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) { \
- if((bd)->status & T_W) \
- (bd) = TBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) { \
- if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) { \
- if((bd)->status & R_W) \
- (bd) = RBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) { \
- if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-#endif
static void __ref debug_cons_write(struct console *c,
const char *s, unsigned n)
{
-#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \
- defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
+ defined(CONFIG_COLDFIRE))
if (MACH_IS_MVME16x)
mvme16x_cons_write(c, s, n);
else
* debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called
* after init sections are discarded (for platforms that use it).
*/
-#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \
- defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
+ defined(CONFIG_COLDFIRE))
static int __init unregister_early_console(void)
{
#define CPU_NAME "MC68000"
#endif
#endif /* CONFIG_M68000 */
-#ifdef CONFIG_M68360
-#define CPU_NAME "MC68360"
-#endif
#ifndef CPU_NAME
#define CPU_NAME "UNKNOWN"
#endif
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
#endif
-#if defined (CONFIG_M68360)
- printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
- printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
-#endif
#ifdef CONFIG_DRAGEN2
printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
#endif
projects / platform / kernel / linux-starfive.git / commitdiff