#include "acpi.h"
#include "sysemu.h"
#include "range.h"
-#include "tizen/src/debug_ch.h"
+#include "ioport.h"
+//#include "tizen/src/debug_ch.h"
//#define DEBUG
#define ACPI_DBG_IO_ADDR 0xb044
#define GPE_BASE 0xafe0
+#define GPE_LEN 4
#define PCI_BASE 0xae00
#define PCI_EJ_BASE 0xae08
#define PCI_RMV_BASE 0xae0c
#define PIIX4_PCI_HOTPLUG_STATUS 2
/* define debug channel */
-MULTI_DEBUG_CHANNEL(qemu, tizen_acpi_piix4);
-
-struct gpe_regs {
- uint16_t sts; /* status */
- uint16_t en; /* enabled */
-};
+//MULTI_DEBUG_CHANNEL(tizen, maru_pm);
struct pci_status {
uint32_t up;
typedef struct PIIX4PMState {
PCIDevice dev;
IORange ioport;
- uint16_t pmsts;
- uint16_t pmen;
- uint16_t pmcntrl;
+ ACPIPM1EVT pm1a;
+ ACPIPM1CNT pm1_cnt;
APMState apm;
- QEMUTimer *tmr_timer;
- int64_t tmr_overflow_time;
+ ACPIPMTimer tmr;
PMSMBus smb;
uint32_t smb_io_base;
qemu_irq irq;
- qemu_irq cmos_s3;
qemu_irq smi_irq;
int kvm_enabled;
+ Notifier machine_ready;
/* for pci hotplug */
- struct gpe_regs gpe;
+ ACPIGPE gpe;
struct pci_status pci0_status;
uint32_t pci0_hotplug_enable;
} PIIX4PMState;
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
-static uint32_t get_pmtmr(PIIX4PMState *s)
-{
- uint32_t d;
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
- return d & 0xffffff;
-}
-
-static int get_pmsts(PIIX4PMState *s)
-{
- int64_t d;
-
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- if (d >= s->tmr_overflow_time)
- s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
- return s->pmsts;
-}
-
static void pm_update_sci(PIIX4PMState *s)
{
int sci_level, pmsts;
- int64_t expire_time;
- pmsts = get_pmsts(s);
- sci_level = (((pmsts & s->pmen) &
+ pmsts = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
+ sci_level = (((pmsts & s->pm1a.en) &
(ACPI_BITMASK_RT_CLOCK_ENABLE |
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
- (((s->gpe.sts & s->gpe.en) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
+ (((s->gpe.sts[0] & s->gpe.en[0]) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
- if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
- !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
- expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
- PM_TIMER_FREQUENCY);
- qemu_mod_timer(s->tmr_timer, expire_time);
- } else {
- qemu_del_timer(s->tmr_timer);
- }
+ acpi_pm_tmr_update(&s->tmr, (s->pm1a.en & ACPI_BITMASK_TIMER_ENABLE) &&
+ !(pmsts & ACPI_BITMASK_TIMER_STATUS));
}
-static void pm_tmr_timer(void *opaque)
+static void pm_tmr_timer(ACPIPMTimer *tmr)
{
- PIIX4PMState *s = opaque;
+ PIIX4PMState *s = container_of(tmr, PIIX4PMState, tmr);
pm_update_sci(s);
}
+static void maru_pm1_cnt_write(ACPIPM1EVT *pm1a, ACPIPM1CNT *pm1_cnt, uint16_t val)
+{
+ pm1_cnt->cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
+
+ if (val & ACPI_BITMASK_SLEEP_ENABLE) {
+ /* change suspend type */
+ uint16_t sus_typ = (val >> 10) & 7;
+ switch(sus_typ) {
+ case 0: /* soft power off */
+ qemu_system_shutdown_request();
+ break;
+ case 1:
+#if 0 // changed suspend operation for emulator
+ /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
+ Pretend that resume was caused by power button */
+ pm1a->sts |=
+ (ACPI_BITMASK_WAKE_STATUS | ACPI_BITMASK_POWER_BUTTON_STATUS);
+ qemu_system_reset_request();
+ qemu_irq_raise(pm1_cnt->cmos_s3);
+#else
+// INFO( "suspend is requested.\n" );
+ is_suspended = 1;
+ break;
+#endif// end : changed suspend operation for emulator
+ default:
+ break;
+ }
+ }
+}
+
static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
uint64_t val)
{
switch(addr) {
case 0x00:
- {
- int64_t d;
- int pmsts;
- pmsts = get_pmsts(s);
- if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
- /* if TMRSTS is reset, then compute the new overflow time */
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
- }
- s->pmsts &= ~val;
- pm_update_sci(s);
- }
+ acpi_pm1_evt_write_sts(&s->pm1a, &s->tmr, val);
+ pm_update_sci(s);
break;
case 0x02:
- s->pmen = val;
+ s->pm1a.en = val;
pm_update_sci(s);
break;
case 0x04:
- {
- int sus_typ;
- s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
- if (val & ACPI_BITMASK_SLEEP_ENABLE) {
- /* change suspend type */
- sus_typ = (val >> 10) & 7;
- switch(sus_typ) {
- case 0: /* soft power off */
- qemu_system_shutdown_request();
- break;
- case 1:
-#if 0 // changed suspend operation for emulator
- /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
- Pretend that resume was caused by power button */
- s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
- ACPI_BITMASK_POWER_BUTTON_STATUS);
- qemu_system_reset_request();
- if (s->cmos_s3) {
- qemu_irq_raise(s->cmos_s3);
- }
+#if 0 // changed acpi_pm1_cnt_write for emulator
+ acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
#else
- INFO( "suspend is requested.\n" );
- is_suspended = 1;
- break;
-#endif
- default:
- break;
- }
- }
- }
+ maru_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
+#endif// end : changed acpi_pm1_cnt_write for emulator
break;
default:
break;
}
- PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", addr, val);
+ PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
+ (unsigned int)val);
}
+
static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
uint64_t *data)
{
switch(addr) {
case 0x00:
- val = get_pmsts(s);
+ val = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
break;
case 0x02:
- val = s->pmen;
+ val = s->pm1a.en;
break;
case 0x04:
- val = s->pmcntrl;
+ val = s->pm1_cnt.cnt;
break;
case 0x08:
- val = get_pmtmr(s);
+ val = acpi_pm_tmr_get(&s->tmr);
break;
default:
val = 0;
break;
}
- PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", addr, val);
+ PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
*data = val;
}
PIIX4PMState *s = arg;
/* ACPI specs 3.0, 4.7.2.5 */
- if (val == ACPI_ENABLE) {
- s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
- } else if (val == ACPI_DISABLE) {
- s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
- }
+ acpi_pm1_cnt_update(&s->pm1_cnt, val == ACPI_ENABLE, val == ACPI_DISABLE);
if (s->dev.config[0x5b] & (1 << 1)) {
if (s->smi_irq) {
return 0;
}
+#define VMSTATE_GPE_ARRAY(_field, _state) \
+ { \
+ .name = (stringify(_field)), \
+ .version_id = 0, \
+ .num = GPE_LEN, \
+ .info = &vmstate_info_uint16, \
+ .size = sizeof(uint16_t), \
+ .flags = VMS_ARRAY | VMS_POINTER, \
+ .offset = vmstate_offset_pointer(_state, _field, uint8_t), \
+ }
+
static const VMStateDescription vmstate_gpe = {
.name = "gpe",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
- VMSTATE_UINT16(sts, struct gpe_regs),
- VMSTATE_UINT16(en, struct gpe_regs),
+ VMSTATE_GPE_ARRAY(sts, ACPIGPE),
+ VMSTATE_GPE_ARRAY(en, ACPIGPE),
VMSTATE_END_OF_LIST()
}
};
.post_load = vmstate_acpi_post_load,
.fields = (VMStateField []) {
VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
- VMSTATE_UINT16(pmsts, PIIX4PMState),
- VMSTATE_UINT16(pmen, PIIX4PMState),
- VMSTATE_UINT16(pmcntrl, PIIX4PMState),
+ VMSTATE_UINT16(pm1a.sts, PIIX4PMState),
+ VMSTATE_UINT16(pm1a.en, PIIX4PMState),
+ VMSTATE_UINT16(pm1_cnt.cnt, PIIX4PMState),
VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
- VMSTATE_TIMER(tmr_timer, PIIX4PMState),
- VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
- VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, struct gpe_regs),
+ VMSTATE_TIMER(tmr.timer, PIIX4PMState),
+ VMSTATE_INT64(tmr.overflow_time, PIIX4PMState),
+ VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
struct pci_status),
VMSTATE_END_OF_LIST()
s->pci0_hotplug_enable = ~0;
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
+ QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
int slot = PCI_SLOT(pdev->devfn);
static void piix4_powerdown(void *opaque, int irq, int power_failing)
{
PIIX4PMState *s = opaque;
+ ACPIPM1EVT *pm1a = s? &s->pm1a: NULL;
+ ACPIPMTimer *tmr = s? &s->tmr: NULL;
+
+ acpi_pm1_evt_power_down(pm1a, tmr);
+}
+
+static void piix4_pm_machine_ready(Notifier *n, void *opaque)
+{
+ PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
+ uint8_t *pci_conf;
+
+ pci_conf = s->dev.config;
+ pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
+ pci_conf[0x63] = 0x60;
+ pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
+ (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
- if (!s) {
- qemu_system_shutdown_request();
- } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
- s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
- pm_update_sci(s);
- }
}
static int piix4_pm_initfn(PCIDevice *dev)
uint8_t *pci_conf;
pci_conf = s->dev.config;
- pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
pci_conf[0x06] = 0x80;
pci_conf[0x07] = 0x02;
- pci_conf[0x08] = 0x03; // revision number
pci_conf[0x09] = 0x00;
- pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
pci_conf[0x3d] = 0x01; // interrupt pin 1
pci_conf[0x40] = 0x01; /* PM io base read only bit */
/* XXX: which specification is used ? The i82731AB has different
mappings */
- pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
- pci_conf[0x63] = 0x60;
- pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
- (serial_hds[1] != NULL ? 0x90 : 0);
-
pci_conf[0x90] = s->smb_io_base | 1;
pci_conf[0x91] = s->smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
- s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
+ acpi_pm_tmr_init(&s->tmr, pm_tmr_timer);
+ acpi_gpe_init(&s->gpe, GPE_LEN);
qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
pm_smbus_init(&s->dev.qdev, &s->smb);
+ s->machine_ready.notify = piix4_pm_machine_ready;
+ qemu_add_machine_init_done_notifier(&s->machine_ready);
qemu_register_reset(piix4_reset, s);
piix4_acpi_system_hot_add_init(dev->bus, s);
PCIDevice *dev;
PIIX4PMState *s;
- dev = pci_create(bus, devfn, "TIZEN-PIIX4_PM");
+ dev = pci_create(bus, devfn, "PIIX4_PM");
qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
s = DO_UPCAST(PIIX4PMState, dev, dev);
s->irq = sci_irq;
- s->cmos_s3 = cmos_s3;
+ acpi_pm1_cnt_init(&s->pm1_cnt, cmos_s3);
s->smi_irq = smi_irq;
s->kvm_enabled = kvm_enabled;
- acpi_state = s;
-
qdev_init_nofail(&dev->qdev);
return s->smb.smbus;
}
static PCIDeviceInfo piix4_pm_info = {
- .qdev.name = "TIZEN-PIIX4_PM",
- .qdev.desc = "TIZEN PM",
+ .qdev.name = "PIIX4_PM",
+ .qdev.desc = "PM",
.qdev.size = sizeof(PIIX4PMState),
.qdev.vmsd = &vmstate_acpi,
.qdev.no_user = 1,
.no_hotplug = 1,
.init = piix4_pm_initfn,
.config_write = pm_write_config,
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82371AB_3,
+ .revision = 0x03,
+ .class_id = PCI_CLASS_BRIDGE_OTHER,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
DEFINE_PROP_END_OF_LIST(),
device_init(piix4_pm_register);
-static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
-{
- if (addr & 1)
- return (val >> 8) & 0xff;
- return val & 0xff;
-}
-
static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
- uint32_t val = 0;
PIIX4PMState *s = opaque;
- struct gpe_regs *g = &s->gpe;
-
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- val = gpe_read_val(g->sts, addr);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- val = gpe_read_val(g->en, addr);
- break;
- default:
- break;
- }
+ uint32_t val = acpi_gpe_ioport_readb(&s->gpe, addr);
PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
return val;
}
-static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
-{
- if (addr & 1)
- *cur = (*cur & 0xff) | (val << 8);
- else
- *cur = (*cur & 0xff00) | (val & 0xff);
-}
-
-static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
-{
- uint16_t x1, x0 = val & 0xff;
- int shift = (addr & 1) ? 8 : 0;
-
- x1 = (*cur >> shift) & 0xff;
-
- x1 = x1 & ~x0;
-
- *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
-}
-
static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
- struct gpe_regs *g = &s->gpe;
-
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- gpe_reset_val(&g->sts, addr, val);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- gpe_write_val(&g->en, addr, val);
- break;
- default:
- break;
- }
+ acpi_gpe_ioport_writeb(&s->gpe, addr, val);
pm_update_sci(s);
PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
BusState *bus = opaque;
DeviceState *qdev, *next;
PCIDevice *dev;
+ PCIDeviceInfo *info;
int slot = ffs(val) - 1;
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
+ QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
dev = DO_UPCAST(PCIDevice, qdev, qdev);
- if (PCI_SLOT(dev->devfn) == slot) {
+ info = container_of(qdev->info, PCIDeviceInfo, qdev);
+ if (PCI_SLOT(dev->devfn) == slot && !info->no_hotplug) {
qdev_free(qdev);
}
}
{
struct pci_status *pci0_status = &s->pci0_status;
- register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, s);
- register_ioport_read(GPE_BASE, 4, 1, gpe_readb, s);
+ register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
+ register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
+ acpi_gpe_blk(&s->gpe, GPE_BASE);
register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
static void enable_device(PIIX4PMState *s, int slot)
{
- s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
+ s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
s->pci0_status.up |= (1 << slot);
}
static void disable_device(PIIX4PMState *s, int slot)
{
- s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
+ s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
s->pci0_status.down |= (1 << slot);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
- PCIHotplugState state)
+ PCIHotplugState state)
{
int slot = PCI_SLOT(dev->devfn);
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
void resume( void ) {
- is_suspended = 0;
+ is_suspended = 0;
- if ( acpi_state ) {
+ if ( acpi_state ) {
- if ( acpi_state->cmos_s3 ) {
- acpi_state->pmsts |= ( ACPI_BITMASK_WAKE_STATUS | ACPI_BITMASK_POWER_BUTTON_STATUS );
- INFO( "raise irq for ACPI wake." );
- qemu_irq_raise( acpi_state->cmos_s3 );
- }else {
- ERR( "acpi cmos_s3 is NULL." );
- }
+ if ( acpi_state->pm1_cnt.cmos_s3 ) {
+ acpi_state->pm1_cnt.cnt |= ( ACPI_BITMASK_WAKE_STATUS | ACPI_BITMASK_POWER_BUTTON_STATUS );
+// INFO( "raise irq for ACPI wake." );
+ qemu_irq_raise( acpi_state->pm1_cnt.cmos_s3 );
+ }else {
+// ERR( "acpi cmos_s3 is NULL." );
+ }
- }else {
- ERR( "acpi state is NULL." );
- }
+ }else {
+// ERR( "acpi state is NULL." );
+ }
}
int is_suspended_state( void ) {
- return is_suspended;
+ return is_suspended;
}
projects / sdk / emulator / qemu.git / commitdiff