dt-bindings: pinctrl: qcom,sm8250: fix matching pin config

The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
(level one and two) are not properly matched.  This method also unifies
the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.

The change causes indentation decrement, so the diff-hunk looks big, but
there are no functional changes in the subnode "properties" section.
The only difference there is removal of blank lines between common GPIO
pinconf properties.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172212.49105-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 9447b79..aa8315a 100644 (file)
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -58,62 +58,69 @@ properties:
 
   wakeup-parent: true
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '^.*$':
-    if:
-      type: object
-    then:
-      $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
-      properties:
-        pins:
-          description:
-            List of gpio pins affected by the properties specified in this
-            subnode.
-          items:
-            oneOf:
-              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
-              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
-          minItems: 1
-          maxItems: 36
-
-        function:
-          description:
-            Specify the alternative function to be configured for the specified
-            pins.
-
-          enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
-                  cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
-                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                  ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
-                  ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
-                  mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
-                  mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
-                  mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
-                  pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
-                  pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
-                  qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
-                  qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
-                  qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
-                  sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
-                  tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
-                  tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
-                  tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
-
-        bias-pull-down: true
-
-        bias-pull-up: true
-
-        bias-disable: true
-        drive-strength: true
-        output-high: true
-
-        output-low: true
-
-      required:
-        - pins
-
-      additionalProperties: false
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8250-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8250-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
 
 allOf:
   - $ref: "pinctrl.yaml#"