mmc: Add SDIO function subnode DT documentation

While SDIO devices are runtime probable they sometimes need nonprobable
additional information on embedded systems, like an additional gpio
interrupt or a clock. This binding describes how to add child nodes to the
devicetree to supply this information.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[hdegoede@redhat.com: Documented the need for #address- and #size-cells]
[hdegoede@redhat.com: Added a real world example]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index b52628b..bac1311 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -64,7 +64,31 @@ Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
 - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
-Example:
+
+Use of Function subnodes
+------------------------
+
+On embedded systems the cards connected to a host may need additional
+properties. These can be specified in subnodes to the host controller node.
+The subnodes are identified by the standard 'reg' property.
+Which information exactly can be specified depends on the bindings for the
+SDIO function driver for the subnode, as specified by the compatible string.
+
+Required host node properties when using function subnodes:
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+
+Required function subnode properties:
+- compatible: name of SDIO function following generic names recommended practice
+- reg: Must contain the SDIO function number of the function this subnode
+       describes. A value of 0 denotes the memory SD function, values from
+       1 to 7 denote the SDIO functions.
+
+
+Examples
+--------
+
+Basic example:
 
 sdhci@ab000000 {
        compatible = "sdhci";
@@ -78,3 +102,25 @@ sdhci@ab000000 {
        keep-power-in-suspend;
        enable-sdio-wakeup;
 }
+
+Example with sdio function subnode:
+
+mmc3: mmc@01c12000 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc3_pins_a>;
+       vmmc-supply = <&reg_vmmc3>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       brcmf: bcrmf@1 {
+               reg = <1>;
+               compatible = "brcm,bcm43xx-fmac";
+               interrupt-parent = <&pio>;
+               interrupts = <10 8>; /* PH10 / EINT10 */
+               interrupt-names = "host-wake";
+       };
+};